Faulty Dishwasher Filling BUT NOT Washing - Trying to FIX

[@RiccardoConturbia]

I appreciate the fact your fixing videos are diverse Maybe not all of them are interesting to everyone, but your dedication to the repair cause is really appreciated.

[@speedwaynutt]

This Dishwasher is giving us some quality content.

[@marcse7en]

A dishwashers isn't designed to give you QUALITY CONTENT, it's designed to give you CLEAN DISHES!

[@thegamer-12]

I THINK WHOEVER COMMENTED KNEW WHAT A DISHWASHER IS IT WAS JUST A JOKE

[@CLC-1000]

MyMateVince = King of fixes on KZbin. Great job.

[@alleallf]

My dishwasher has 8 years of use, it never gave me problems, but I have two water filters installed in my house, the water here is collected from the rain, in the region where I live, I also use chlorine in the dishwasher once a month . Greetings from Brazil. I love your videos.

[@davethompson8934]

Life saver mate, had the same issue, doing everything but wash, watched your video to find the pump motor, opened the motor to find a worn impeller had fell off, new impellor for a fiver and the dishwashers working great. even managed it without dismantling the motor from the unit.... saved a fortune mate cheers.

[@wardrin]

Make sure you top up the salt regularly. It is there to soften the water. At 2:14 you can see salt low light being on indicating there's not enough salt. Add salt even if you use 3in1 tablets. Also check your water hardness, you might get it from your water supplier, and adjust softening accordingly. There should be a table in the manual showing which setting you should use for which hardness level. Love your videos, keep them coming!

[@lorrainewarn4897]

Vince. Watched your video. We seemed to be having the same problem so ordered a wash motor. Fit it today. Seems to be working perfectly. Thankyou. Saved us a lot of money.

[@SegwayNewMexico]

I watched this and another video specific to our dishwasher. I did what you did, cleaned up everything and it worked! So happy, $850 Kenmore that had been sitting and never used so I think the motor just needed a little push. Thanks man.

[@ktaragorn]

The dishwasher is probably his biggest fan.. Keeps creating content for free :P

[@kongtaing5206]

I love how you going through it, step-by-step such I can follow your thought and learning it with you. Very good video - thank you.

[@TheCod3r]

I hate it when my dishwasher stops working, even just the few days while I try and find the time to take a look can be a real inconvenience. Great video as always Vince

[@ArreglandoCosas]

Excelent fix Vince. Took a risk buying it and paid off! Very satisfying haha i could feel it in your voice. Congrats!

[@mikekelly9129]

That classic Vince celebration is absolute gold, well done bud 👍

[@jackcheng7437]

You try to fix and use different way, finally you have fixed that👍👍👍👍👍👍

[@iand1482]

Hey Vince, been following your channel fo a while and love it. This video came up randomly when searching to fix my dishwashed and I have the same kitchen cabinets, drawer handles, floor tiles, and dishwasher - which is even cracked in the same place! Crazy!

[@Mymatevince]

😂

[@kevinchua464]

Winning! Nice job Vince, and well done on saving an appliance going to the tip, keep up the good work.

[@NeathVideos]

Get hold of a box of citric acid-they sell it in wilkos at the moment,it’s with all the other washing machine cleaners etc-pour half the contents in,and run it without any dishes-this stuff will dissolve any calcium build up. Well done on the diagnosing and repair-I’m a service engineer,and do this day in day out!

[@THEMASTER10121]

Vince will never get rid of this dishwasher because he loves fixing it so much 😂 Gives him things to do and videos to make. In a way Vince and the washing machine are best friends and secretly discuss when vince wants the dishwasher to stop working so he can fix it again 🤔😂 Nice video vince 😁😜

[@HooverLux]

That was brilliant, well done, you did a really good diagnosis and that should last now for a good while. I can recommend Kilrock Descaler sachets, best on the UK market, 2 sachets every 6 months, highest temp with the machine empty of dishes. Well done mate.

[@kirbster1977]

Your relief was priceless. Nice repair.

[@viggosimonsen]

Very nice troubleshooting - as you go along - video. Congrats with your success. Wish me good luck. I have exactly the same problem, and will need to do what you just did there

[@MikeB_UK]

Vince, well done - another great bit of detective work. Please keep your 'signature' intro tune on your videos as it's quite fun - missed it on this one. Cheers.

[@ReneSchickbauer]

I admire the patience of your wife. In most families you would come home to a huge parcel with a replacement dishwasher and a sticky note on top saying "Please install TODAY" :-)

[@madjack-bv6dv]

Three years later, you've just saved me a lot of hassle and money. Same model dishwasher and the same problem. You've got to love KZbin. Unfortunately that particular pump is no longer available. But the unit is 15 years old. So not worth repairing anyway. But luckily I have a spare dishwasher in the garden shed. Doesn't everyone?😁

[@jackadams3878]

my dad's been collecting the f'n things since before i showed up. im gonna be pulling them out of my sheds for a week when the time comes XD

[@narinderchander]

It's a good job I have a water softener fitted for the house supply. It does cost money but then I don't have these kinds of failures in my water based appliances (I live in London where the water is hard). Plus I usually use the dishwasher/washing machine cleaner once a month and they've given me years of reliable cleaning/washing. Enjoyed the video, keep up the good work!

[@coryengel]

If my dishwasher lay nonfunctional for 5 months while I continually make “fix” videos, my wife would drop a bowling ball on my head in my sleep.

[@ftrueck]

Do not forget: the video series is called TRYING to fix. Not sure but there is a slight chance of going horribly wrong with water damage... 😆

[@b3ats]

If your dishwasher was nonfunctional for 5 months she wouldn’t be able to drop a bowling ball on your head 😉

[@adiposerex5150]

Cory Engel tell her to buy a new one and avoid spending the rest of her life incarcerated with vermin.

[@garrygemmell5676]

Try washing by hand dude you any idea the chemicals in dishwasher cleaner and you are eating off those plates.

[@louiseschneider8103]

Lmao!

[@watercreator]

You are like the better Tim Taylor from Home Improvement. Keep at it!

[@marcianzero_yt]

He‘s probably just got more Power.

[@metanevets91]

Great video, just wish you would do more fault finding on the old pump. E.G.: Comparing it to the new pump to see if that play was there, or trying silicone lubricant to revitalize it.

[@JJ-kr6ky]

Well done Vince. It shows that persistence pays off👍

[@trekkygeek]

Yes, wash pump motors often go, especially if it hasn't been used for a while. Use your dishwasher, they like it. If you don't use the washer regularly then things seize up. Well done on fixing it. You have the respect of a dishwasher engineer. 🖖

[@markchilds8311]

Great video, mine had exactly the same sound as yours I managed to take the pump apart and clean while leaving the motor alone and it solved the problem ( if this is an option for anyone else it may save buying a new motor )

[@oblong3039]

I take it the missus is away for the weekend then Vince....made a right old mess of the kitchen! Quality video...cant wait until the sequel :-) Having a crack on my dishwasher tomorrow, so picked up some good tips.

[@sooze1969]

Brilliant video :-) Thanks for showing all the stages - and I held by breath wondering if it would work! Well done. My Beko dishwasher is not cleaning properly but its the top arm that is not rotating - so I'm going to get some dishwasher cleaner to see if that clears away any grease or grim blockages.

[@Whetzell]

I felt your joy when you fixed it, I think I have the same exact issue.

[@Rureal42]

Tjis is exactly what has happened to mine today. Checked the outlet hose which is fine, the drain pump had no obstruction so will try this fix tomor. Thanks for your vid.

[@timelesspeach7984]

Just so you know I’m 11 and I’m so inspired by your videos and I think you should keep doing what you’re doing because it’s gonna be a great career

[@shadowglitch442]

I am 11 too

[@kajuss5122]

I am 11 nearly 12

[@elliot762001]

Hey Vince, the impeller is not supposed to come off the shaft easily like you did, this generally means the impeller is faulty and there will be too much play and the impeller will catch on the housing. The only fix was a new circulation pump. P.s I am an appliance technician.

[@roytom2054]

Excellent video yet again. Well done.

[@juniorcook4094]

You can fix a pair of nail clippers and I would still watch it lol.love your videos

[@TerroxNL79]

Well done Vince !

[@davisly1]

Glad to see u fixed the washer great video

[@rebug5614]

Very good Vince 👍🏻 I've got the exact same dishwasher myself but hopefully mine stays trouble free. Will know what to do though if it plays up 👍🏻

[@annerieduplessis353]

Thanks for this! Gave me some insight as to what was going on with my dishwasher and it seemed to have worked ✋🏼✋🏼

[@gibbo9089]

Couple of tips Vince - adjust the water softener setting on the dishwasher as your water there is obviously very hard and also run a dishwasher cleaner through it regularly.

[@blueberrymuffin115]

Thank you, clean the plastics from the motor, was dirty, different model from yours Hotpoint FD550.... and the dishwasher has been fixed.... Thank you for this video. The issue is as you said, dirt around the the part that the magnet turns.... It cost £1.50 for new jubilee clip. and an out of labour.

[@NOWThatsRichy]

A really satisfactory repair, dishwashers are alot more complex than many people think, Ive always had Bosch models, they usually last about 10 years, Always keep the salt resorvior topped up, the water in this area of southern England is very hard.

[@lutboy2909]

My mate vice, those pumps goes bad from bushings and the liquid inside of the rotor is ferromagnetic fluid so once they fail is impossible fix it, also those pumps They commonly fail in the wash machine so prepair for dismantle one 🤣 I know it coz I repair wash machines/dishwasher machines and the common faulty is those pumps, first They start to make noise then to get stuck and the last stuff is fry the coil, in the worse case the pump frys the drain circuit in the circuit board (commonly in a samsung wash machine, in fact I hate those friking machines) So here we go my two cents

[@josh6715]

I just take the pump apart and spray silicon spray where the rotor is and i have never had trouble doing it that

[@equid0x]

I have a similar pump on my machine. The graphite bushings had worn in an eccentric hole, causing the stator to hit the side of the casing, sometimes stalling the motor. I could not source the bushing, so I rigged a nylon drill bushing in a rubber washer at each end. It's been nearly a year and the fix is still holding with the machine used nearly every day. I had to run a reset cycle on the machine to get it to heat water again after it threw codes.

[@gregsmith2262]

I would have pulled out the other pump and give that a clean. Have you tried some vinegar or citric acid to dissolve scale?

[@karchenwayzer2734]

hi mate, i love the way you explain when you put your tools onto the broken devices to repair it. i have always been following your tutorial, always awaits your new videos and for that thanks a lot. i have browsed almost all youtubers technicians or have googled many times but have never came close to my search, the search on replacement of the parts on any boards. mate, i would be very grateful if you could kindly make a video, only on "PARTS REPLACEMENT" , like if you can't find the same parts number, what parts could be used to fill up that parts, please could you?

[@Apk07]

I think its mostly trial and error. You google the model, hope for a repair diagram or parts shop... If you can't find it, you look for others from the same brand and then just compare the broken part in your hand to the pictures of the parts online. I don't think he can really "teach" this in a video, it's just taking the time to dig around the internet.

[@karchenwayzer2734]

Thanks @@Apk07, i don't know but frankly i am newbies in such frames, so mechanically i can understand but when i go through pcbs, even if i find the fault, i can't replace the parts as i can't find the same parts number, so i thought there could be some ways to replace it. thanks again sir for your comments.

[@DarronPotter]

Eventually Vince that machine will be full of replacement parts with no original parts at all, great video

[@ronledbetter4993]

The circulating pump is the same as the Whirlpool and a lot of other brands. Mine quit cleaning or might I say I got around to fixing it the week before Christmas. I first blew out the holes in the spray arms but it still didn’t spray properly. I removed the pump an disassembled it. The bushings were worn enough the stater rubbed the side. My wife was in a hurry to have it fixed. I removed the bushings and replaced them with RC wheel ball bearings. Thou they are stainless steel I have read these will eventually rust and lock up. I have since cut two pieces of 1/2 in. Acetal rod 11mm in length. Drilled a 5mm hole in the center and mounted them in my drill press. Then turned down half, 5.5 mm to 10 mm with a small file. I kept the old bushings with the o-rings and plan to use the o-rings on my home made bushings.The old bushings were made of graphite probably to wear quickly. Acetal will out last graphite 10x. The bushings and o-rings cannot be purchased separately from appliance parts store. If the large o-ring leaks you have to buy a new pump. Not me! I’ll make my own bushings, use the o-rings from the old bushings and replace the large o-ring with a new #235 o-ring.

[@wledigstudios]

Good fix Vince.!

[@davidhester9716]

Thank you for this informative video!

[@GHOOGLEMALE]

Genius - Well sussed out and good fix

[@cadenswain158]

Newer appliances seem way more over engineered than they need to be. Probably done intentionally to drive the cost up and the chance of a breakdown and deter repair.. my 25 year old Maytag dishwasher is still going strong. Its never had any repair work done to it. only the door seal was replaced and proper maintenance was done to the drain filter. BTW, I love the channel Vince! Quality content. And to anyone who reads, have a great day!

[@sergheilitvinov95]

Nice video! I think the scale rocks in the motor housing imbalanced it and caused the fault. To prevent this kind of faults need to do preventative maintenance once a month, like to run the machine with the descale solution.

[@Plan-C]

I just spent my Sunday morning watching Vince sod around with an old dishwasher 🤣

[@richardhemingway6084]

That play in the impeller, is to make sure the motor runs the right way. Those induction motors can run either way. On switch on, it is 50/50 whether it starts the right way round. If it's wrong, that clutch kicks it back the right way and it then continues the right way.

[@revseancasey2774]

another great video mate, well done on the fix. Keep the great content coming

[@spidermcgavenport]

Water filter and a water softener may be a good investment for longevity.

[@hooeezit]

The salt reservoir inside _is_ the water softener. Does the exact same thing as a home water softener. What is common, though, is forgetting to refill the salt. Now that I have seen what it does to the pump, I will make sure I refill mine on a regular schedule.

[@Stoney3K]

Also, check if the drain filter doesn't have any big holes, since that would cause any gunk from the dishes to go back into the circulation pump.

[@minorrhoads5318]

BRILLIANT , THANKS FOR POSTING . SUBSCRIBED TODAY . 🤠👍👍👍👍👍

[@peterbrandt7911]

Nice fix Vince

[@kennyyellop]

Well done vince.

[@HavingFunRepairs]

Hey Vince, wonderful repair. Something you may consider, I had to do with my dish washer, is verify the heating element (if your dishwasher has one) is not full of lime scale too. Had to replace both pump and heating element in my dishwasher. FYSA even though I'm American I live in the UK.

[@GadgetUK164]

Excellent =D That limescale is a nightmare! I wonder how long before that other pump fails?

[@jamesdougan8789]

nice one old mate vince.... another victory over the gremlins that break stuff well done cheers james D

[@classicgamer4451]

@My Mate vince you are oh yeah man of many talents 👍

[@mustaphamustapha9993]

i appreciate your video, thanks👍👍👍

[@xzibit1978]

Freddy Boswell. There's a name I haven't heard in years! 😂 I used to love Bread.

[@wthornton7346]

Vince V the 'Appliance of Science'. 10oz gloves. No headguards. Someone is going to get hurt!

[@Jeff121456]

Quick troubleshooting on this one! If you had a clamp meter you could have easily tested the current draw of the pump motor safely and verified that it was drawing excessive current when the rotor wasn't turning. They allow you to test current draw without breaking the circuit as you would have to do with a standard multimeter. Cheap ones run around $20-$30. which is good enough if you just do occasional testing and don't need real accuracy. You just hook it around one wire and it reads the current through induction. Works on ac and dc. Can even help verify shorts in electronics.

[@fivemountains2224]

Hi Vince, Which motor (pump) did you took out ? The washing one or the drain one ?? It appears my Blanco Dishwasher has the same problem . Thanks

[@aquatics117]

Cant wait to see trying to fix a none draining dishwasher next week

[@BelRiose2000]

Is the water going from the salt dispenser to the circulation pump? Or is dropped into the machine from the thingy on top of the salt dispenser?

[@armarra]

Vince there's a 2 part vidéo of a repair of that pump by replacing the bearing the magnetic shaft spins on so that it comes back to centre He used a ball raced bearing and it worked.. It seems the black plastic bush at the end of the shaft is a weak point good job.. but the bearing of the motor at top and bottom of the shaft is the weak point

[@kimcan71]

Vince, thank you so much for this video. My Neff dishwasher is doing exactly the same thing as yours was. I'll be taking mine apart now as I think I can just buy the parts needed and not have to buy the whole unit 🤞

[@abesmith8642]

well done vince

[@dereksigler8247]

Enjoyed. Wish he had read the ohms on the new motor. Curious if it would have been north of 48 Ohms as a good indication.

[@paullefur6213]

great vlog Vince mate, but just use a dishwasher limescale and cleaner pod and clean free dishwashing.....many ppl sell them i wont get Vince into trouble, just look it up on the NET

[@paullefur6213]

I live in a hard water area and do this treatment once a month, it helps saves the internals , seals and the pump.

[@nightstah]

Awesome that dishwasher is certainly keeping you in the video business over all this time, lol :)

[@Tooma1979]

Great work boyo

[@DEmma1972]

Great fix. Can you buy a descaling tablet and run a wash with it just to clear all the limescale?

[@TheSkaldenmettrunk]

Dishwasher fixing? Check! Very interesting to see a dishwasher like this.

[@knighthawk86855]

Yeah prices have gone wonky, here in the states, the pump/heater for my bosch is 300 dollars, insane price, I can pick up a maytag which is a 1500 dollar dish washer, with a simple leak, that can be fixed with a rubber o-ring for 5 dollars, I can get it for 50 bucks, tomorrow, and it's a 2019 model, but great fix mate.

[@MrBater1979]

Vince, it looks like you don't have any salt in your salt tank. if you want your heating element to last longer, I would advise you to fill it up, salt in the all in one tablets is not enough for hard water areas. plus the motor you just replaced is called a recirculation pump. Good btw

[@Tim_3100]

Great video this dishwasher has a lot of problems 😔

[@AnotherDud3]

Did you check the brushes on the motor? usually the likely cause of a motor not spinning, carbon based so they wear down over time

[@thomasvlaskampiii6850]

What did you call those pliers at 11:28 ish? It sounded like "wide claw mole grips" but I can't be certain. I ask because here in the US, they're called vice grips

[@Catstorm99]

Yes In the UK we call them Mole Grips.

[@thomasvlaskampiii6850]

@@Catstorm99 Alright. Thank you for clearing that up for me. Don't get me wrong, I understand that different countries have different names for things but that one confused me. Mostly because I couldn't hear him clearly

[@stefanmarinescu5086]

As always, your perseverence and courage is amazing.

[@hugoiglesias8069]

My pump had a piece of plastic inside!!. Removed and solved the problem of no draining water!!

[@HackySmack53]

Love these trying to fix videos, especially the Switch ones!

[@shadowglitch442]

Me too

[@joaquinfernandesgarcia3269]

7:03 Maybe that's the circulation pump

[@pedroramos9413]

Great video! Thanks

[@craniumbear]

Sweet! Great vid!

[@donquijote6030]

I'm a bit late, but I had to fix the drain pump on my two year old dishwasher. It only cost about $15 for a new pump on eBay. Now it works like new!

[@minthos4045]

Had this exact same issue. Cleaning the gunk around the shaft fixed the issue. Luckily I didn’t have to buy a replacement.

[@Ratchet_effect]

And the phone call about the dish washer went something like: Freddie Boswell: Who knows? The magic all might dry up. The universe might be short of Boswells. Vince Boswell: So what am I, then? The family stud? Now I can't get the theme tune out my head, Thanks for that Vince 😁🖖

[@gorky_vk]

Nice fix but doesn't sound like winding in that motor is failed and you can keep it as spare. My guess is that bushing/bearing on either end of rotor shaft failed, just enough to give motor hard time starting, with a "push" it will probably still work but obviously in this case that's impossible to be confirmed.

[@TamerEldegwy]

I think the motor responsible for the washing has a problem with its bearings and should be replaced , this fix will work for a couple of days if you are lucky and then the motor will stop again.

[@nameless-og]

I opened that motor on my kenmore certain I was going to find some trash in it. Nope 😂 There was a tiny amount of grit, but nothing that should have stopped it, I wonder if the bearing actually fails when it heats up... at rest/disassembled, it seemed smooth and all.

[@gediminasambrazas3294]

Quite good job.