An important thing to check before you install the next set of spark plugs is the gap even if says pre-gapped
@fcpeuro5 ай бұрын
For peace of mind - it never hurts to check!
@cykablyat85134 ай бұрын
Copper is the best conductor of any spark plug metal in use and as such, a copper plug gives the best spark. It is a broad spark which produces a large flame front in the combustion chamber. Iridium plugs *do* last longer...a lot longer. Like over twice as long as a copper plug. They tend to overheat as it takes more electricity to produce a comparable spark but for most vehicles (cars, etc) this is not a concern. The big deal with iridium plugs is that you do not need to change them as often. For performance machines, I still use standard copper resistor plugs (to answer the OP's question: The "R" stands for resistor which means it puts out less electrical interference). Especially in racing where we tend to run richer mixtures (or are dumping fuel in wide open all the time) the iridium plugs will foul out whereas the copper ones will not. There is a huge misconception that Iridium plugs perform better, even people who should be 'in the know' are subject to relentless marketing campaigns. I can tell you that at least 3x a year someone will call me into their garage because their track bike is not running well and it was cured by replacing the iridium plugs with copper
@conorthomas1231Ай бұрын
For an polo mk4 2006 1.4 would you suggest copper plugs? Running a bit boggy recently and have checked everything else apart from the plugs
@x-man470218 күн бұрын
@@conorthomas1231 Copper plugs and are easy to change in a VW Polo.
@alphastone83625 ай бұрын
After the third mention of the term “modern high performance engine “ the reference starts to lose meaning. It’d be helpful to cite a couple of vehicles and their engines to help your average viewer understand better.
@repairvehicle5 ай бұрын
Awesome information! Thank you!
@fcpeuro5 ай бұрын
Happy to share!
@michaell.4455 ай бұрын
Copper core is better for a forced induction engine at the same heat range as iridium for a remedy to spark-knock on a hot track day.
@Abauto84Ай бұрын
brilliant video the information is so good not many on KZbin are as good about spark plugs as this one
@roberthicks883523 күн бұрын
Okay so i have a 2000 alero 307k miles. Double Iridium or Racing?
@johnnyblue47995 ай бұрын
Don't lube the coated plugs. Check what the manufacturer says...
@7mpowerd5 ай бұрын
I know NGK specifically says no anti seize anymore. It also brings up torque on plus. Can lead to stripping.
@johnnyblue47995 ай бұрын
@@7mpowerd Exactly. NGK's spec was exactly what I had in mind.
@jeffreycattelino3996Ай бұрын
Every plug has a "gap" with that being said the installer has to check the gap and adjust if needed.
@garyvanremortel52185 ай бұрын
No discussion of side-gapping for improved flame front, lesser gap for boosted engines or resistance checks?
@rschneid19965 ай бұрын
Those are specialty applications and not applicable for ordinary street driving.
@bryancreagan58385 ай бұрын
Indexing should be discussed particularly for Mercedes.
@Quietprofessional14 ай бұрын
Would a iridium plug be better than a regular copper plug for a generator
@dixondavispe5 ай бұрын
But, WHY do all these different (and usually more costly) material changes in spark plugs make them better? Why, will I receive better gas mileage or why will I need to cool my chambers down?
@shmuck664 ай бұрын
well, first off it is to concentrate spark energy into the most intense spark possible. This is why fine wire designs are used on modern plugs. Next, fine wires have sharp tips, making the spark plug easier to set off. The down side, is with a more intense spark is it is easier to melt and wear away the electrode material. This is why they use platinum and iridium materials, which resist melting and wearing away much better than copper/nickel plugs of old times. So that covers why the new plugs use these costly materials. The additional benefit is the longer life these materials give your plugs, so they last much longer pushing up the maintenance intervals. this helps keep customers and bean counters happy. Regarding temperature ranges. Stick with the stock temperature range unless you know you need colder, or you have been told by your tuner to use a colder plug. The heat range referred to is the ability of the plug to move heat out of the tip of the plug. Normally you want the plug to maintain a certain temperature so it stays in it's self cleaning range (range of temperature where the plug won't collect soot or ash or deposits) if the plug is too cold, it can foul up from deposits. but if the plug is too hot it will lead to knocking and pre-ignition and engine damage. So you want to use what the manufacturer of your engine recommends. Remember, it's ok to go colder, just not hotter. Why would you go colder? well if you have tuned your engine or are use the car on track days, you are making more heat, which can lead the stock plug to get too hot and start causing knocking or pre-ignition, leading to engine damage. So going colder when you are tracking the car or driving hard, is a way to keep the engine from hurting itself.
@microcolonel4 ай бұрын
Does there exist any third party qualification on DFE/PSPE NGK Ruthenium HX plugs? They claim that they are as ignitable as any of their other plugs, and are expected to last as long as Laser Iridium.
@7mpowerd5 ай бұрын
Does FCP euro know the gap for M177 plugs? I’d like to check before they go in.
@iz29045 ай бұрын
crazy that I'm literally looking for spark plugs right now 😂 I'm replacing my 2004 volvo s40 T5 spark plugs. Which ones do you think I should use then??🤔 Because it's not exactly a modern car.. but it's not the oldest..
@iansmith67285 ай бұрын
Check your owners manual for the correct plug.
@autumnjeserich268911 күн бұрын
"If you don't know what spark plugs you need for your performance application ask the person who built your engine or your tuner" Well shit, both of those people are me
@fcpeuro10 күн бұрын
😂
@scottykilmer39203 ай бұрын
Most important you always install the right type spark plug for your specific engine. Do not install platinum or iridium if your car came with copper !
@cellculturist5 ай бұрын
Hey there, some misinformation in this video! Copper is by far the best conductor out of the three and will offer better “performance” than platinum and iridium. The only downside is they don’t last nearly as long. Long time FCP euro customer here and I love the parts selection, but saying platinum and iridium offer better performance for high HP applications is just not true. If you want to run a plug for 100k miles, go for an iridium. If you want the best spark ensuring the most complete fuel burn, copper is the way to go. Just change them out every 20 to 30k.
@cellculturist5 ай бұрын
That being said, if your car came with iridiums from the factory, likely best to stick with it. There is more at play than just conductivity. Many plugs and wires even have purposefully chosen resistances. Heat dissipation is also different between the three.
@paulkennedy80365 ай бұрын
Was just about to say the same thing about the miss information on the “performance” aspect. The coppers will offer the best performance but not last as long
@shmuck664 ай бұрын
@@cellculturist resistance differences between copper and iridium is freaking meaningless at 30kV-100kV that the plugs fire at. Fine wire tip resulting in ease of ignitability due to electrical field formation, and ability to keep that fine wire tip sharp for a long time, is what makes important factors for plugs. Heat dissipation is already dictated in the temperature range the plug was designated, so between the 3 types, if they all have the same heat range then the heat dissipation is nearly the same. If I have a B8ES and a BR8EIX and a B8EVX, they all have a heat range of 8. So you can't go saying that the heat dissipation is different just because one is copper vs the platinum or iridium ones.
@cellculturist4 ай бұрын
Yup you’re right on the heat ranges! But resistances… You mention the firing voltage but are you familiar with the amperage?
@shmuck664 ай бұрын
@@cellculturist yea, i am. im an electronics engineer and work with high voltages daily in use for laser and x-ray generation. Amperage is not concern here. it is total joules of ignition energy. The minuscule resistance change you are trying to say is important is like 0.001% change. it's meaningless here, and whatever minuscule difference it does make will be made up by the fact the ignition coil delivers a certain amount of joules to the plug. so to make up for it the spark will last a fraction longer so that all the same joules of energy go to the spark tip. you also seem to be ignoring the fact that the ignition coil, ignition conductor and spark plug have inbuilt huge resistances like 1000 to 10000 ohms. so the minuscule 0.01 ohms change in resistance from copper to iridium is meaningless. also one more point to thors hammer this. those iridium plugs are not totally made of iridium. 95% of the plug uses the same copper as a copper plug, only the final last 1mm tip of the plug is iridium. so there's that.
@bimmermavenwrench16605 ай бұрын
pretty weak tech content..."use modern plugs for modern engines " "colder plugs cool down the combustion chamber"...no.
@andreborges28815 ай бұрын
Weak content, sadly. “Modern performance engines”, “iridium better performance than copper”, “colder plugs cool engine combustion chamber”?Expected MUCH more from you, guys. Cheers, from Brazil.