How To Install Universal Power Windows | In Depth Tutorial | Manual to Power

#universal #powerwindow #howtoinstall
www.amazon.com/shop/influence...
In this video I Install a Universal Power Window Kit in my vehicle with roll up windows. This is a simple modification anyone can accomplish with a little patience and time.
Power Window Kit - amzn.to/2TjLo1Y
Power Door Lock Kit - amzn.to/3sLyP0v
How to Install Power Door Lock Kit - • Install Power Door Loc... .
*Disclaimer: This video description contains affiliate links. That means that I am awarded a small commission for purchases made through them, at no added cost for you.

[@ms1_77]

To be honest I literally just found you and the way you explain stuff is so good. Keep up the good work !!!

[@goatmaster3387]

THIS IS PERFECT, thank you so much for not wasting time, best video on this subject I can find, about to upgrade a Colbolt with this kit and this was SUPER helpful, I will be checking out your other videos.

[@NoNamesGiven_]

I really like this video, you explained all this very well, no filler, no BS. Much appreciated! I am about to do this job on my 04 Honda Civic DX, I'll have power windows for the first time! (11 years with this car, still running great). Cheers mate!

[@NoNamesGiven_]

Question for you: did you use a fuse tap for power, and if so, what existing fuse did you tap into and what AMP was it? Thanks.

[@tcraiford]

I wasn't planning to do this in my Solstice, I was watching your power locks actuator video and this one auto played by accident and now you've convinced me. Good project for all my free time!

[@Wando64]

Me too

[@unbroken222]

I didn't know this was an option! I'm glad you shared! We have an '05 work truck that would be nice to have this in!! Thanks Ryan!

[@MrAlex-bp5fg]

I like how clean and very clear you are when you explain everything, Thank you 👍🏿

[@Fentertainment]

I try to keep the videos simple and straight to the point.

[@lowrider4life213]

Great video 👍 just ordered 2 sets one for my 91 honda crx and one for my 89 hatch back civic 😎💯 cant wait till they get here looking forward to this conversion

[@nataliegasque1774]

Thank you sooo much for this 🙏🏽 I was actually contemplating going to my local junkyard, removing and purchasing 4 door panels for the same vehicle that had power windows. This is much simpler, cheaper and less time consuming! Especially since I have to keep checking for the model and wouldn't know until after installing if they even work!

[@levellkinchen1]

and less heat and pick over junked cars. lol

[@shawnwimberly9294]

Factory stuff is so much better than this trash, and it bolts right up

[@playamade8000]

Awesome video. The makers of this kit should of definitely payed you for doing this video. I'm sure I can speak for 90% of the people in these comments your video convinced me to buy this kit.

[@alloutautomobile1170]

I've been considering these for a while now. Thank you for the in depth video I will defiantly be ordering them

[@joshstreet09]

Great video! I'm just about to install this same kit on my s10 and found this video very informative.

[@LuisMartinez-ft9or]

Excellent video. There’s a 2019 F250 crew cab work truck with the diesel engine and a whopping 7 miles that my local Ford dealer wants to sell for $35,000. The truck has no power windows and no cruise control. It seems that those two things can be added for fairly cheap. I don’t care if they don’t work the same as factory as long as they get the job done. $35K for a diesel work truck that’s brand new and can be converted to a fairly comfortable truck is starting to sound really good.

[@rickcee6572]

Excellent thank you. I was looking at this kit for my 1995 Land Rover defender 90. Now am going to give it go. Great video. 🙌🏼

[@MortalZombieDog]

I installed one in my car works pretty well I enjoy having power windows over my old cranks.

[@braulioortiz184]

Dude great video, I was looking for a tutorial video to install one on my tacoma, I’ve been doing some stuff to it, security dash cam, led lights in the bed, backup cámara and next will be this, thank you and GOD bless keep up the good work.......

[@freddy091000]

I was hoping this would come along 👍👍👍 I already install the tailgate assist ,door locks lol

[@myoneblackfriend3151]

I am super grateful for how detailed you are. You are giving me a lot of confidence to try this myself.

[@brennen22359]

Good video. It was informative and Finnertaining. There was a section in there where you videod your hands and Finners which is usually hecka irritating to me but this was not. Thank you for doing such an informative video, you helped make my choice for my window actuators and the Finnershed product looks really good. All joking aside, killer video. thank you.

[@GuyRendon]

I suggested this product to my mother-in-law for her older car. She purchased one from Amazon and it did arrive fast but when we opened the box, the parts looks like it had been used before. Seems like they have sent a “returned” item. The white gears and risers were dirty and greasy, some of the screws & rubber bushings are missing. Even the power window motors are dusty and scratched. We are communicating with the seller but it has taken a lot of emails back & forth. We sent them pictures of the parts and lately pictures with circled notations. They are probably figuring out either to send a brand new box or just replace the missing and dirty parts. Hoping to get this sorted out so that I could install it this weekend. Btw, I installed the Keyless Power Door Locks without any problem. Awesome video tutorials and keep it up!

[@kdarkholme]

Imma be honest, I didn’t need to know this information. Stayed because you did a great job breaking stuff down. 😂 I will probably never have to do this, but I stayed liked and commented. Thank you for your hard work

[@johnbrevard5966]

Thanks for this... I used to put these in new dodge cars in 1990 and 1991 when I worked for car stereo company... spal was the brand, amazing they are still the same, this was the best kind then and I still believe now.

[@Fentertainment]

I agree!

[@imruoll]

Hi great video I wanted to ask if you might know if i can take the electric window motor and all of the mechanism from one car and install on another car . For the matter I’m asking about a mazda lantis 333 i have two of them and the newer one doesn’t have power windows while the older one has them. Do I need to take some of the wiring too?

[@danielwersing8714]

This is an excellent video. Clear and concise.

[@farminginstyle1697]

Such a wonder fully made explanatory video highlighting all aspects, makes it simple for novices, like me, to grasp and understand

[@sparkedcuriosity2283]

GREAT VIDEO AND GREAT UPGRADE. I have the same truck. Keep u the great videos man. Big fan.

[@beforeal580]

Great video man I wanted to let you no I couldn’t cover the old window handle so i made it were it could fit back so it looks manual up and down.but i have the new power switch installed in some blanks that was in my dash.wasn’t fun getting them to stay in place lol.

[@BadassEFdriver]

Very thorough walkthrough. Bless you sir

[@marcus_b1]

Now this is what I call a good instruction video ⭐⭐⭐⭐⭐

[@ManCrafting]

That’s pretty dang slick. Great find and very good information. I should see if there’s room in my little Nissan work truck. I’d happily spend that to go from manual. Getting lazy in my old age. 😂

[@Adventures-with-Otis]

Great Video, just what I needed to guide me through fitting mine :-)

[@akawireguy1197]

Excellent video. Now I understand how it works and I can see the system isn't the mass of clutter it looks like.

[@artramirez3506]

Excellent video. Very easy to follow and you described everything very well. Thanks. I used a similar kit on a Frontier I had back in the day after I got tired of manually cranking open the windows. LOL.

[@Julian-vd4wf]

I’m watching this to add it to a frontier lol

[@lilyrose6819]

Could you please show how/where to connect the red wire to fuse box, that’s literally the only thing I can’t find anywhere

[@chrissagredo7129]

Should connect to your windshield wiper fuse. 30amps, with a fuse tap

[@akwlb2]

Do an extra step and run a wire from the battery to the new fuse box. Splicing into existing things are just lazy work and you wanna do quality work. Adding a fuse box will allow you to add rear view cameras, dash cams, lighting or anything else that needs power.

[@chrissagredo7129]

Sifaka since my truck is a base trim work model I would love to just add a fuse into my stock fuse box. The spots are there. Any advice on that?

[@oscarpuga2720]

Same, just did mine yesterday and only thing i need is the power 12v

[@chapo.7017]

Go to your auto part store and ask for an add a fuse. And you can connect your existing fuse and a new fuse in the same slot

[@terrencesingh7943]

Thank you so much for the video, can’t wait to do my truck 😎

[@butler386]

Great tips on removing the window handle. Sure hope those motors last longer than GM factory ones. Are there clips for removing the door panel? Like plastic push and pull ones?

[@Wando64]

I think I will copy all your activity. It is exacting what I was looking for but for my old Alfa Romeo Duetto Spider 1989!

[@just-got-here5594]

Perfect explanation, thank you!

[@TheBlackmunch]

Simple and brilliantly explained 💕

[@chrischannon2739]

Brilliant, thank you

[@sharkiplier1163]

If you got a stock switch for the vehicle could it work with that with some modifications

[@bumancuzbrah]

very good video. im gonna buy this for my ford f150. thank you.

[@calebwhite5859]

Wow great video 👍🏾

[@Chaos-wd4df]

Question are these switches removable to install into a factory trim piece?

[@bflatfive9456]

Outstanding!!!!!!!!!!!!

[@elisio0416]

You're the best 👍

[@Rebondir100]

Merci beaucoup pour votre vidéo.... J'ai une voiture ancienne. Cela fait un petit moment que je cherche à installer des moteurs électriques pour les vitres de mon véhicule. Je ne savais pas trop où chercher. Mais là c'est une révélation. Encore merci.

[@dunnbizzy79]

I bought a replacement window crank at auto zone and the teeth that grabbed the crank didn't last one turn. I'm concerned if the plastic quality will be strong enough to maintain hold on the door crank?

[@antoniop5889]

Whats the dremel adapter u used to make the window crank whole bigger??

[@joshbrowning3488]

I have a question. If my truck has manual windows, and I installed factory power window buttons, could I run the wires, after they are ran to power/ground to the factory switch buttons? Regardless phenomenal video man!! You gained another subscriber! Thanks for posting a how to video the right way!

[@ReonLeon]

Can this use in conjunction with the manual winder as backup instead of the blank piece?

[@adamfigueroa8013]

Would this fit a Chevy Silverado? 2008 where u order the kit from?

[@delosarellanos2589]

If i were to grease the window mechanisms will it still make noise

[@timnichols6999]

This seems to be a solution for my 2014 Titan S model, which currently has manual windows. However, manually they are quite tight to operate. Is this motor assembly stout enough to handle normal pressure?

[@almc-wi5vo]

Great dude, thanks.

[@vixxone1]

great video. So a year after, how is this kit holding up?

[@dexburwell]

Awesome video…. was looking for a way to somewhat “modernize” my 1988 Mitsu MM pickup… had no power options whatsoever Edit : power steering

[@benpearce6536]

Very good video Easy to flow GREAT JOB Thanks

[@charlielowell4077]

Great video! Absolutely supreme detail! I have the same truck ('01 Sierra) I bought the same kit and I'd REALLY REALLY like to know where you got your 12V ignition power. I'm going to do this install, plus the power door lock install you did soon (weather permitting). Thanks so much!

[@Fentertainment]

Charlie, Check this link out. Should tell you everything you need to know. This website is listed in the description of the video and what I use for all of my vehicles. www.the12volt.com/installbay/forum_posts.asp?tid=7482

[@aihobbies1350]

I use the wiring and the switches from the kit. I use the oem power regulator and use a pig tail to connect to that aftermarket one.

[@honeyberry4009]

What did you use to power the regulators? Jumped off a fuse?

[@DJ-JAY-Q]

Hi what’s that tool called to disconnect the handles please

[@dougphillips7339nwnwn]

I just did this today. Thanks for the instructions! I used a fuse tap for the power. Ford has a 15v fuse for power wondows and sunroof even if you don't have those options lol.

[@Fentertainment]

Excellent!

[@akusitaaiai2215]

What year and model is your Ford?

[@dougphillips7339nwnwn]

2013 f150 xl

[@akusitaaiai2215]

@@dougphillips7339nwnwn Thanks man

[@thomasmiller2667]

Great video. It will make my job much easier, *but* I wouldn't put the switches in the door pull like that. You can't put your hand into the pull, and on a windy day you need to hold on tight.

[@bryangutierrez6164]

I have the same one and recently, the plastic belt inside the bridge got jammed and is popping out and different sides… would you recommend buying another one, or is there an easy fix to this??? (Not sure if this is common)

[@christophermclaurin7479]

excellent tutorial

[@angelest79]

Very cool thanks

[@sebi23]

Are they still working properly to this day? Great video man!!

[@papergatorzfedducca7998]

Thanks new subscriber!!!

[@GotAudio20]

Thank You ...

[@sahilp9096]

which this brand u used

[@kuehnel16]

I need to know where to connect the wires

[@pw9996]

Good.explanation.thanks... Is there anyting weakness form.this kit...

[@bobcat3102]

Great video.

[@31tysonw]

Do you know what fuse source that power windows is tapped into? I blew the fuse and cant find it lol. Thanks dude.

[@marthagarcia2784]

Where did you connect the ground wire. I followed these exact steps. I connected the power wire to the ignition fuse and when I connected the ground wire to metal it sparked and blew the ignition fuse.

[@Sip28]

How do I run the power wire to the ignition only? I already have the ground in place just need to run the power wire

[@joel6689]

They are out of stock do you have another model you can recommend? Thanks

[@onewayelectricinc8259]

thanks for your video is very nice explanation

[@haroonmuhammedyounalive4109]

Does it fit in wrangler 2008

[@gilchevy]

great video

[@TallGuyChris]

Good video

[@fas9667]

Is there a switch for the passenger side ,so your passenger can control that window ? Never mind i saw one in the parts illustration. Great vid btw.

[@Kevin15673]

lol now I'd like to see you close the door, I probably would've either grabbed a power window door panel from the junkyard or cut holes in the blank space above the door pull, but to each their own.

[@bnorby213]

Are yours painfully slow up and down ? Wonder if the motors can be changed

[@halifaxcanada3655]

Where do I connect the red wire to power it I got a mini fuse tap to tap into the fuse box but the fuse tap I got Says not to use anymore them 10 amp but the window kits is a 30 amp so I can’t use the fuse tap. Where els can I connect the red wire

[@grandcreator11]

So cool

[@ahmadossaily9041]

So how can I add a switch for the passenger side window on the driver side so I don't have to lean to click the passenger switch ???

[@renzcarlos3450]

Hello man !! Did you use relay ?

[@ianfairweather5615]

Any one know if you can buy replacement plastic gears?

[@SuperLowScores]

anyone have an idea if this will work with a corolla 2006? i have no idea with the wiring

[@complementarychaos]

How do you "connect the last red wire to the fusebox for ignition power"? How does that work? Are there terminations for bare wire at the fusebox? Does the wire have a clip or connector to plug into the fusebox? Ive done a lot of work on my van but nothing electrical yet. Great video, though! I learned a lot!!

[@gadsdenviper7149]

How long did it take to install this kit on your truck?

[@vikasvarule132]

Sar best video

[@tri5garage544]

Great video. How are they holding up?

[@djflashlinx5150]

I am assuming there is a switch on the passenger door?

[@JoseGonzalez-go4nx]

How is it holding up?

[@kisakyetommy]

Thanks brother, am connecting my L200 mitsubishi tomorrow. 2020

[@nyz3rjp783]

Sir if u r from phil. pls advised Iam also interested to upgrade to power window, Thanks

[@robertnegrete128]

😀great har

[@lobsterstrange]

Can we just wire it from the speakers?

[@klane7]

Does it still works like it was new ?

[@rinku8260]

I have no clue where my ignition power source is at on my 2006 Silverado 1500 where would it be at??? And a good ground