Fiat 500 Classic - Part 9 - Servicing the engine and first drive

Did an in-depth engine service on the Fiat 500.
New coil, points, condenser, distributor cap + head, sparkplugs and wires
Adjusted valve clearance
Cleaned centrifugal oil filter
New clutch and pressure plate
New aluminum oil pan(3.5L)
Restored rear engine mount with new bushings
20w 50 oil, new air filter, new fuel filter
Restored carburetor in a separate video. Check it out here: • Weber 26IMB carburetor...
Music from Tunetank.com
RocknStock - Rock It (Copyright Free Music)
Download free: tunetank.com/t/1fv8/713-rock-it

[@checkthatmeat]

Love your videos man, I just picked up a fiat 126p with the 650, so I am new to these engines, would you have any idea of why it starts to miss out after around the 20 min mark of driving. It runs perfectly find up until then.

[@AircooledProject]

Thanks. I couldn't say for sure, but maybe it is ovearheating. For a start, you should check the termostat and flap on the right side of the engine. Maybe take out the termostat, leave the flap open, and see if it works better.

[@CasaDin30]

Salut. Unde ai gasit sita de la capcul de culbutori ca o caut de cateva zile:)? Felicitari pentru munca depusa si multumesc pentru efortul de a-l filma.

[@AircooledProject]

Salut. Eu am avut-o pe masina, doar am curatat-o. Am vazut-o de vanzare la axel gerstl, de acolo am luat piesele noi. Este piesa 01029. Multumesc pt apreciere!

[@CasaDin30]

@@AircooledProject mersi de pont. De la astia inca n-am comandat.

[@AircooledProject]

Sunt ok, primesti cam in 3-5 zile. O sg data am asteptat 2 sapt piesele.

[@davemitchell3833]

Hi would you have have any tips / trick no fixing a new front panel to the front wings, only I am restoring a fiat 500F and I cant seem to work out how to weld with the limited space, any advise would be very much appreciated.

[@AircooledProject]

Hey, I answered your question on the other video.

[@CasaDin30]

Salut din nou. Cand am dat ultima oara jos capcul de culbutori am observat ceva foarte ciudat la unul dintre culbutori/tacheti. Se misca foarte tare si nu prea imi dau seama de la ce. Ma gandeam sa te intreb poate ai o idee. kzbin.infobxxox4GgmdE?feature=share

[@AircooledProject]

Salut. Nu stiu daca e normal sau e uzura, dar si la mine e la fel. In motor inca nu am umblat(doar revizia din clip). Va trebui sa il refac si pe el, probabil acum in toamna.

[@CasaDin30]

@@AircooledProject si la tine e tot pe admisie la cilindrul 1?

[@AircooledProject]

@@CasaDin30 da, ala avea joc cel mai mult. Parca era si pe celelalte, dar mai putin.

[@CasaDin30]

@@AircooledProject mersi. sa pun o intrebare si pe fiatforum sa vad daca a mai patit cineva.

[@AircooledProject]

Daca folosesti facebook, e si acolo un grup cu oameni ok, "Classic Fiat 500". Apropo, ma poti adauga si pe mine pe fb. Linkul e la seciunea "about", din pag canalului de youtube.