Replacing the clutch in a 2013 Fiat 500. It's a known issue with these cars. I would definitely recommend buying OEM. Part one is mostly prep for removal of the transmission(battery box, axles, starter, bumper,etc.)
Пікірлер: 37
@jimgrayden48013 жыл бұрын
Great Videos, a big thank you. A couple of points. Firstly, the axle nut on my Fiat 500 0.9L is a 36mm not 35mm as described in the video (yours may be 35mm, mine is definitely 36mm so others should check their own vehicle) and I didn't have to grind nearly as much as you did. Mounted my new socket on an impact driver and rotated it on the running angle grinder - much neater result and I only had to do about 1cm or so. Second, the nuts on the back of the battery box/ECM are a pain to get to. You can umplug the ECM by lifting the latches from the centre up and outward from the centre then the plugs come out upwards. The ECM comes out attached to the battery box - much easier.
@besttex4735 Жыл бұрын
Take the rotor off no grinding needed
@airman643 жыл бұрын
Man, you did such a great job the only complaint I have is I wish you had more lighting. I'm thinking about doing it on mine although I don't know if I could actually do it.
@cashmansgarage51343 жыл бұрын
Thank you! I'll try to get better lighting on future videos. I upgraded the lighting since this video tho. LED makes all the difference!
@seanjost7160 Жыл бұрын
the 3rd bolt on the starter!!! Thank you!!
@wittsend39334 жыл бұрын
DID I HEAR CORRECTLY YOU CALLED IT A "FORD FIAT 500?" THINK YOU MIGHT BE A LITTLE CONFUSED
@cashmansgarage51344 жыл бұрын
Haha I did but didnt feel like retaking the video. I dont really do edits :-P
@channghiem50124 жыл бұрын
you heard it correctly , he incorrectly labelled it
@tabithiajones25113 жыл бұрын
YOU KNOW WHAT THEY SAY ABOUT FORD. FIX IT AGAIN TONY. LOL. - DALE GRIBBLE BYEAH
@ivanvega282110 ай бұрын
Is this similar to a 2014 500L with an automatic transmission??
@OsvaldoPaese4 жыл бұрын
wow your most viewed video is the one for the Fiat. There must be a lot of non Americans watching.
@Crusaderglenn3 жыл бұрын
Nailed it!I started watching videos on how to change the clutch on my olds alero,but ended up here hahaha.I'm from Europe :D
@timothyblythe19964 жыл бұрын
So my friend has a 2013 fiat 500 arabth when she pushes the clutch in it makes a slight squealing noise. Where should I start on getting it fixed?
@cashmansgarage51344 жыл бұрын
If I was to guess, I would think either the throwout bearing or the clutch itself. Is the squeal continuous or is it just during the actual pushing of the pedal?
@timothyblythe19964 жыл бұрын
That's what I was thinking. I can't remember but I can find out tomorrow thanks for the help.
@timothyblythe19964 жыл бұрын
It on makes the squealing noise when the clutch pedal is pushes in
@cashmansgarage51344 жыл бұрын
Try using some 5w40 by the pedal assembly. If no difference then back to lookin at clutch
@cashmansgarage51344 жыл бұрын
Wd40***
@themarvelousvintage763 ай бұрын
Its a nightmare way to many parts to remove on the fiesta way easier even on my 2014 mustang 5.0 you just remove transmission bolt parts of exhaust manifold and that all
@dennismayer49368 ай бұрын
Good attempt at sharing the process. Unfortunately there wasn't a good transfer of knowledge.
@irishjoker33534 жыл бұрын
Destroying half your tools ooh dear .
@scottgecias10225 жыл бұрын
Make sure you don't get a junk clutch
@johnwinters74644 жыл бұрын
Jesus no need to remove drive shafts
@channghiem50124 жыл бұрын
my understanding the Ford KA is built off the same platform....
@johnlightbody99422 жыл бұрын
it is
@philip.aocallaghan46023 ай бұрын
Very bad camera work it's either too dark or blurred ..
@KeepEmCommin3 жыл бұрын
Ford fiat 500?
@jimmytrejo14622 жыл бұрын
Ford fiat ???
@yb2112 Жыл бұрын
Seriously, i appreciate the work thxs, but the video is nauseating to watch.
@davejohnson44723 ай бұрын
Fuck that..sell the car
@semarugaijin94513 жыл бұрын
Ford... Fiat 500? : /
@cashmansgarage51343 жыл бұрын
Yeah I slipped there, didn't take the time to edit it out haha