Fiat 500 Power Steering Fault - Steering Column Removal and Repair

Loss of assisted power steering for the Fiat 500 is a common failure across all build years. Even with two different versions of the power steering column in circulation this remains one of the biggest Fiat 500 problems.
Loss of power steering usually happens intermittently, often leading to full and complete failure, leaving the steering extremely heavy.
We’re going to show you how to remove your electric power steering column, ready for repair…
Common Failure Symptoms:
• Intermittent to permanent loss of power steering
Common Fault Codes:
• C1002 - Steering Column Motor Torque Sensor
www.ecutesting.com/common-fau...

[@aleksanike.]

Does the same apply for a Fiat 500L?

[@mecaelecauto6937]

Hello How do you lock the steering column? For centering during reassembly

[@HarryFlashman.]

I haven't had a diagnostic test but I'm pretty sure mine is on it's way out. Intermittent power steering failure! I'm in the process of taking it out and sending it to you. My car is a 2010 Pop.. Do you think the plastic covering underneath will have to come out to access the rack? Also noticed the air vent needs to come out as well?

[@Ecutestinglimited]

Hi. The vehicle we are carrying out the work on in this video is a 2018 500 Pop, so it may be a slightly different process in your vehicle. However if you are struggling to remove the whole unit due to the plastic covering underneath, you may be able to disengage the steering lock and remove the top half of the column which will allow you to drop the other half out of the vehicle. We removed one of the air vents in this video to provide easier filming access to the column securing bolt on the intermediate steering shaft, and it isn't a necessary step if you can access it with extender tools. Hope this helps!

[@jharris888]

Does the same apply for the Fiat Panda turbo diesel. 2010? Thanks

[@Ecutestinglimited]

Hi there None Taken. This video is for the Fiat 500's EPS unit, however the Panda's unit is similar, so some steps shown in this video will be relevant. We would always recommend following the manufacture's guide for more detail. Thanks.

[@CheekyCultured]

I have a panda 100hp. would this be something you guys can help with ? cheers

[@Ecutestinglimited]

Hi. Yes, we do re-build Panda EPS units. Follow this link to our website to double check your part number against our services: www.ecutesting.com/product-catalogue/fiat/panda/power-steering-eps-electric-power-steering/ If you have any further questions please feel free to contact our technical support team via email at: [e-mail]. Cheers

[@danhancock422]

I have a 2008 Fiat bravo the steering has stopped working do you fix them? How much are they?

[@Ecutestinglimited]

Hi. We do offer a test and re-build service for the Fiat Bravo EPS unit. Click this link for our up to date pricing: www.ecutesting.com/product-catalogue/fiat/bravo/power-steering-eps-electric-power-steering/ Cheers.

[@davebentley4829]

my 2009 panda keeps pulling to the left ive been told the streeing motor need re placing,ive had the tracking done but now it pulls to the left more than it did when i got the car

[@Presdiruk]

sounds more like tracking

[@iandownie]

I need more information on exactly how the spring securing clips are meant to be released. This video doesn't give enough information. Are they turned or pushed or what?

[@davebellis5723]

Hi I have a 2016 renault kadjar that isn't self centering and gets worse the faster you go especially dangerous on a motorway, Renault want to replace the whole unit at a cost of £1900 lol. Is this a common fault that you guys could repair.

[@Ecutestinglimited]

Hi. If you are able to email us your part number and details of the fault, such as any fault codes or methods the dealership used to diagnose the fault (if you are able to), then we try and assist you. Contact our technical support team via email at: [e-mail] or by phone [phone]. Cheers

[@skodaaaaa]

Hello mate, need to get my daughters column rebuilt. How do I go about it I can remove it no problem

[@Ecutestinglimited]

Hi. You can either go to our website and fill in our online test form here: myaccount.ecutesting.com/ Or you can give us a call on 01773 535638 or email our technical support team on [e-mail]. You will need to provide a few details such as the make and model of vehicle, symptoms of the fault including fault codes, and the part number printed on you unit. Our team will then be able to advise you of the re-build solution we provide as well as a quote. Thanks.

[@hadijahed3836]

very good

[@adrianojeminaj9860]

Panda 312/319 has a electro steering system but don’t have torque sensor like panda 169…. Which si the fault ? The steering locked

[@Ecutestinglimited]

Hi. Do you have any fault codes produced at all whilst the steering is locked?

[@adrianojeminaj9860]

@@Ecutestinglimited I remember The text : fault by torque sensor

[@Ecutestinglimited]

@@adrianojeminaj9860 Do you have the part number of your power steering unit so we can look into this for you? Thanks

[@tcwilliams7561]

How/where do I sent my unit in for testing?

[@Ecutestinglimited]

Hi. We are based in Derbyshire in the United Kingdom, however we offer a worldwide service so you can send your unit in to us no matter where you are located! Please fill in our online test form to get started: myaccount.ecutesting.com/. If you have any further questions, please email our technical support team on [e-mail], or give us a call: [phone]. Thanks.

[@smarttseluvka]

i need mine rebuilt where do i contact yous

[@Ecutestinglimited]

Hi. Please visit our website here: www.ecutesting.com/common-faults/fiat/fiat-500-power-steering-fault/ and select the part number which matches the one printed on your unit. If you cannot find your part number on our website then please email our technical support team at [e-mail] or give us a ring on [phone]. Thanks

[@bensonjohn5400]

Good

[@davidcotter4476]

So where do i send it

[@Ecutestinglimited]

Hi. Our address is ECU Testing LTD., Delves Road, Heanor Gate, Derbyshire ,DE75 7SJ United Kingdom. If you would like to get your unit tested and re-built then please fill in our online test form at myaccount.ecutesting.com/ If you have any further questions please email our technical support team at [e-mail].

[@just_cars_drayton]

Good morning did you say you were in keele ?...do you have a contact number ....we have a fiat panda 4x4 with intermittent power steering grumble 2006

[@Ecutestinglimited]

Hi. We are located in Heanor Derbyshire, but we offer a worldwide service. You can call our office from 9am-5:30pm BST Mon-Fri at 01773 535638.

[@iandownie]

THE VIDEO IS WRONG! AT 4:18 WHERE IT SHOWS THE SPRING SECURING CLIPS CIRCLED IN WHITE, THESE ARE NOT THE CLIPS! THE CLIPS ARE THE WIRE RODS YOU CAN SEE AT BOTH SIDES AND THE BOTTOM. THE SCREWDRIVER NEEDS TO BE TWISTED TO EASE THEM BACK.

[@bitsnbobs1969]

few relays sorts the problem

[@HarryFlashman.]

Smart arse!

[@iandownie]

As soon as they say 'just' on these videos you know you're in trouble. Like 'just' undo the connecter, or 'just' undo the clip. They tell you what to do but not how to do it! Until you know how the manufacturer uses electrical connections, you're in the dark about how to unclip them and a broke connector is on the way. I'm an engineer by trade (aircraft) so, I\'m not stupid, but it would be more helpful if a closer view was shown when undoing clips or connectors to save learning how they work by breaking them!

[@bigcbradio]

If you can't figure out clips and connectors yourself without breaking something you probably shouldn't be working on a car anyways. Additionally, it may be best that they don't give specific details as each vehicle model and year may have different types of clips/connections.

[@user-gx4lw3th7m]

There's nothing here indicating how to send the item to you.

[@Ecutestinglimited]

Hi. Please follow this link: www.ecutesting.com/common-faults/fiat/fiat-500-power-steering-fault/ and select the part number which matches the one printed on your unit. If you cannot find your part number on our website, then please email our technical support team on [e-mail] with the following details. Your make and model of vehicle, the symptoms of the fault you are experiencing (including fault codes), the part number printed on your unit, and any further diagnostic information you can provide e.g. attempted fixes. They will advise you further. Thanks.

[@chriswilson4614]

Had a fiat Panda which is more or less the same as these things and I had to have to steering columns in the three years I had the piece of shit. I wouldn't buy a fiat car if it was the last car on the planet . Fiat know about this fault but have done nothing to remedy it and my car was a 2005 car and loads of these had the same problem