that would be the worst place to have the intake , u need it across near where the battery is , hot air is thin and wont give good fuel/air mix , so being close to exhaust wont work , what u need is the pod under the bonnet/hood , and need extra amount of pipe work and have in the front where the grill is a Cold air intake box , and then have that routed to the carb , colder air gives better combustion , and also what ever you do Intake wise u need to do Exhaust as well as if your getting more air in , u need get hot exhaust gasses out quicker , the better u get that, the better Bang for your buck u get , Air intake mod's are only as good if u know what to do with them on the other parts of the engine
@JoniK17 жыл бұрын
I'm aware of that. There's no space near battery, it's double the original size. I already fitted oversize throttle body, performance camshaft & fuel pump, Ashley exhaust manifold and Supersprint catback. Definitely faster now :)
@Makipaaw4207 жыл бұрын
JoniK tee seuravalla videolla bassojen lämmitys sillon kun on pakkasta
@thebeast-puntomk28784 жыл бұрын
Also, that is going to get socked by splashing around in the puddles
@hifonicdd8 жыл бұрын
Hot air intake :D
@ViezeVingertjes7 жыл бұрын
Better than the standard filter.
@JayHowi7 жыл бұрын
Michael Overhorst agreed my standard air filter looks like it sucks air out of the engine anyway may aswell make it sound loads nicer
@ViezeVingertjes7 жыл бұрын
Yeah right, also the standard one is above the engine. I have the same one as on this video, except i don't have that huge ass battery, so it fitted nicely in that corner behind the fan. So i'm pretty sure that get's more cold air than before. The oil breather filter sounds very nice btw, sounds a bit like the turbo air valve on higher rpm's haha... "Psssss" while shifting, pretty ridiculous but funny as hell.
@tamasv.73167 жыл бұрын
hi! What is the diameter of the aluminum pipe? 50mm or 60mm? And silicone pipes? One I see is 60mm 135`, and the other? thx :D
@JoniK17 жыл бұрын
Hi! 60mm. The other one is 45 degrees :)
@hlx58513 жыл бұрын
Do you get better sound?
@JoniK13 жыл бұрын
Yes it makes some noise
@ronnycortes40844 жыл бұрын
Hola soy de Chile me encantó el video , y gracias por los links, tengo un fiat punto 1.2 y tengo el problema del filtro que topa en la culata y se derrite, para mi es este video la solución espero me puedas responder y hablar sobre el tema y puedas guiarme:3
@JoniK14 жыл бұрын
Hi! I modified it a bit, check my new video kzbin.info/www/bejne/fGfIapukj5KraK8
@costantini_61837 жыл бұрын
Hi! Nice car! What is the interne diameter of the 90° silicon pipes? I have the same here in Italy!
@JoniK17 жыл бұрын
Hi! 60mm :)
@amy40c6 жыл бұрын
Can I install just the filter without this tube or I wouldn't be able to close the hood? I have the same car.
@JoniK16 жыл бұрын
Yes you can but the filter must be short type :)
@amy40c6 жыл бұрын
Can you find it for me please. I'm not exactly sure which one so I don't want to order wrong one :D
@1djandi6 жыл бұрын
Amar K. No you can not..it will just suck hot air from the engine
@amy40c6 жыл бұрын
Thank you guys!
@beni11672 жыл бұрын
Please link from ebay for this same filter kit, if it still exists. Now is 2021.thanks!
@JoniK12 жыл бұрын
It's not available anymore but check my pinned post for needed parts
@charlesdrake11683 жыл бұрын
ciao, perchè hai eliminato lo scudo para calore davanti ai collettori di scarico?
@JoniK13 жыл бұрын
It was rattling and you don't need that 😃
@VertigoEdwRos3 жыл бұрын
How much PS do you gain from this modifikation?
@JoniK13 жыл бұрын
Max 5hp, usually 2-3hp kzbin.info/www/bejne/fGfIapukj5KraK8
@coraz986 жыл бұрын
This will damage the engine? I have a 2001 Punto, 1.2 8v
@JoniK16 жыл бұрын
No it won't if you follow cone filter instructions. I've had the induction kit installed since I made this video, bought new cone filter last summer. My car is same as yours :)
@coraz986 жыл бұрын
Thank you for the info, very kind✔✔
@johnanderson6630 Жыл бұрын
Can you get big power from a 12 fiat active
@JoniK1 Жыл бұрын
Not really without boost 😃
@alexlulashi62622 жыл бұрын
link kit pls
@ap-gooner-95482 жыл бұрын
What size alloys are you using?
@JoniK12 жыл бұрын
9x16"
@civilianaesthetics89812 жыл бұрын
What about oil edema?
@JoniK12 жыл бұрын
The small filter is for it
@jugilili28692 жыл бұрын
how many mm is this small for air
@JoniK12 жыл бұрын
60mm, check the pinned comment for parts
@stefanoromasino36183 жыл бұрын
La macchina va meglio? Hai notato miglioramenti significativi?
@JoniK12 жыл бұрын
kzbin.info/www/bejne/fGfIapukj5KraK8
@dlxXD6 жыл бұрын
Is this a mk2?
@JoniK16 жыл бұрын
Yes :)
@dlxXD6 жыл бұрын
Thanks bud
@9ff7702 жыл бұрын
what's the diameter of body throlle ?
@JoniK12 жыл бұрын
Check the pinned comment
@MrDjmiky907 жыл бұрын
ciao anche io o una punto 1,2 8v, volevo sapere se si perde potenza montando questo filtro grz
@JoniK17 жыл бұрын
Hi! You won't lose power, original filter is really restrictive :)
@payment907 жыл бұрын
Mini Air Oil Breather Filters How many mm??
@JoniK12 жыл бұрын
25mm
@ΗΛΙΑΣΑΓΓΕΛΟΥ-ε3σ2 жыл бұрын
Did you gain any horsepower from this?
@JoniK12 жыл бұрын
kzbin.info/www/bejne/fGfIapukj5KraK8
@riotagus8 жыл бұрын
Very nice , but what does it do ?
@JoniK18 жыл бұрын
Nice roar and maybe some power gains :)
@riotagus8 жыл бұрын
Ok, thank you for your reply .
@alessiolelli96256 жыл бұрын
Ciao, per la punto mk3 potrebbe andare bene lo stesso?
@JoniK16 жыл бұрын
Yes it will fit 99-07 1.2 8v engines :)
@alessiolelli96256 жыл бұрын
ok, thank you
@TheMarineGamerIGGHQ6 жыл бұрын
Anyone know where I can buy these from now?
@JoniK16 жыл бұрын
I can tell you what parts you need to build it yourself :)
@TheMarineGamerIGGHQ6 жыл бұрын
@@JoniK1 as long as I know where to get them from it would be awesome!
@JoniK16 жыл бұрын
Silicone 135 Degree Elbow Hose 60mm Aluminum Pipe 300mm 60mm Silicone 45 Degree Elbow Hose 60mm Aluminum Pipe 76mm 60mm Performance Air Filter 60mm 4x Hose Clamp (min diameter 68mm) Here's all you need, easily found from Ebay :)
@TheMarineGamerIGGHQ6 жыл бұрын
@@JoniK1 big thanks man!
@stefanofox41442 жыл бұрын
Rende di più,o è 1pacco?
@Fiatfan Жыл бұрын
I wish there was the same for fiat Seicento
@dietznutz16 ай бұрын
Just make one
@cuorele4 жыл бұрын
Dove si può acquistare quanto costa
@JoniK14 жыл бұрын
This kit isn't available anymore but check the pinned post for needed parts 😊