WONDERFUL well thought out improvements, wish I still had my X1/9 !!!
@pisitumporn3851 Жыл бұрын
me to55
@paule79214 ай бұрын
Me too - mine was identical to his - much missed. Only got 1k for it was like new cream leather & red
@alastairwatson32012 жыл бұрын
Thanks for the advice, David. I have twin 40mm IDF carbies on mine. I keep them cool via an override that I wired onto the thermo-switch for the engine bay cooling fan. If I get stuck in traffic, it’s a very hot day, I’m driving hard or whatever, I kick the fan in to keep the carbies and all the metal around them them cool. I have been considering doing the engine lid mid. However, I live in Tasmania, Australia, where it gets a bit too wet. I like the fuel pump and electronic ignition mods.
@twentiethcenturyboy63282 жыл бұрын
You are correct about recent X1/9 values increasing. But remember the golden rule when it comes to values.. Every time you cut away or alter a part that aesthetically alters the look of your car (in this case the cutting of your engine lid) it “may” have an adverse affect to the value because it’s now not original. People can be very fussy when it comes to originality. Especially the purists! A very simple technique in helping the engine stay cool without cutting metal is to install a manuel radiator fan override switch. Plus, adding a second fan is very easy to do also. Both fans will draw in the necessary air through the radiator on demand whilst sitting in traffic Your car is the same colour as my 1981 fuel injected. (Rosso Arancio) 👍🏻 Very nice example mate.
@davidmoult57702 жыл бұрын
All true. I have a switch. But, I have a spare lid. Texas aluminium radiators are a sure fix plus a reverse flushed engine and proper cooling together with accurate timing. As for purists look how Porsche altered their simple air cooled 356 into the oil cooled 911. Progress, as Dan Dare might have said.
@michaeloxman3820 Жыл бұрын
Always enjoy someone enjoying their X. thanks for the vid.
@davidmoult5770 Жыл бұрын
Thanks for watching!
@sidneyplowman6 ай бұрын
Interesting mods I replaced my expansion tank With a jag one i believe .I wish I still had it sold it 20yrs ago.Fun car .
@davidmoult57706 ай бұрын
Ah well, that's life.🙂
@ScoobyDoo716 ай бұрын
I had many of this problems too and changed from carburetor to SPI. Best decision ever !!! I think it is a „PIERBURG“ fuel pump. Regards from Germany
@holmgrown Жыл бұрын
Love mine, thanks for the video Shrink tubing over wire connectors
@davidmoult5770 Жыл бұрын
That's a great idea!
@stephanmurphy9098 ай бұрын
Very interesting as my sister has one and yes I found the carb had problems not to bad now I cleaned it I also got a electronic ing but have not put it on yet I got it from UK it's a unit that goes in instead of points you video has been very informative thanks Stephen for Ireland and they area rare car now but why going well a joy but can get sloppy at times
@davidmoult57708 ай бұрын
Well thank you. I wish you success. Another you tube channell shows that the idle jets are not as the book shows but reversed.
@davidmoult57708 ай бұрын
My electronic ignition has certainly improved the car.
@domenicozagari2443 Жыл бұрын
I would put a bit of oil on the rust to stop it and to get more power i wold put a glass of petrol in the oil to remove the viscosity.
@davidmoult5770 Жыл бұрын
Good idea🙂
@hunbun101 Жыл бұрын
you inspired me to fetch an hei distributor for my 128. these improvements hopefully go a long way.
@davidmoult5770 Жыл бұрын
The car runs better, more flexible.
@christopherhill58902 жыл бұрын
Any reason you don't use Loctite on the carburettor securing nuts?
@paule79214 ай бұрын
Nb. Even Cornwall has the odd heavy rain stotm.
@davidmoult57703 ай бұрын
You are right, it rains a lot
@farkinarkin50992 жыл бұрын
Wasn't there a large Bakelite heat shield between the intake manifold and the carburetor? That and the electric fan kept the carb cool enough.
@davidmoult57702 жыл бұрын
It didn't seem to stop fuel vapourising in my engine. Have a look at the tiny slot the fan gets its air from. It seems too small to me.
@farkinarkin50992 жыл бұрын
@@davidmoult5770 Sometimes people replace the shield with a similar thickness of fiberglass when they put in a bigger carb -- which no longer shields it. That does tend to heat the whole intake structure up. Never had hard starts when warm though (as far as I remember). Freeing up the deck lid (like you did) should have done the trick. If I recall, the fan gets air from the portside side intake (I always loved how these were functional and not just cosmetic. The grid on that intake can be restrictive. There's a guy in Australia who has been restoring an X. He'll probably have some good ideas. 👍
@patrickmaloy5262 Жыл бұрын
The electric cooling fan for the carbs was a must in Houston, Texas, the cars ran hot. The Bertone was popular, lady friends who owned them had them air conditioned, so no one was going to win any races driving them, they were all about "the scene". I owned a Datsun 240Z about this time and air conditioning was problematic as well.
@davidmoult5770 Жыл бұрын
@@patrickmaloy5262 The Scene, well at last I am part of the In Crowd. Opening up the engine bay is useful. Best wishes from Cornwall.
@matthewisaacs5307Ай бұрын
Nice video. Have you ever heard of a fan to cool the carburettor?? 🤷
@davidmoult5770Ай бұрын
Yes, some people fit them. The electric fuel pump seems to solve vaporisation. All the best.
@pokdub27032 жыл бұрын
Tks David. Appreciate you sharing your experiences with the X1/9. Look forward to more. I will pull that breather pipe as you suggest. Just finished cleaning the Weber, so will not going to undo work. For the Luftwaffe pump, did you need/consider a pressure regulator as well. Did your have problems with the mechanical pump?
@davidmoult57702 жыл бұрын
The pump is the Hardi 14412 and it doesn't need a regulator. Expensive but the best. I checked their web site for the model number for the Fiat 128 series engines. The mechanical pump is fine but you be get an instant start and cool fuel into the carburettor with the Hardi. All the best, David
@jimratcliffe58497 ай бұрын
Hi David, do you have any more details about the parts required for the electronic ignition conversion? I'm guessing its a S178 distributor because it has a vacuum line. what Hall effect trigger did you use? Thanks Jim
@davidmoult57706 ай бұрын
I used a fiat distributor, marrelli, that had an ignition module skrewed to it. Originally from Texas. The module overheated and stopped I think, so I replaced the transistor switch with a generic one mounted on a thick aluminium heat sink I made. I think I made a video on it. It works really well. The modules only cost about £20 and are much easier to replace than points. I did have to modify the access cover to the points, the engine bay one with a hammer so there was enough room for the new distributor. Thanks for watching.
@paule79214 ай бұрын
I believe the mesh is a potentisl disaster re rain
@davidmoult57703 ай бұрын
I have an internal cover for parking outside at night but driving in rain hasnt been a problem.
@christopherhill58902 жыл бұрын
A very helpful and informative video that would really help me in keeping my X1/9 running. Just wondering if you have ever had a Twang from the alternator belt?
@davidmoult57702 жыл бұрын
Never
@markbowden7238 Жыл бұрын
Haha, you triggered a memory of when I first got mine. I didn't fully understand the belt drives both the water pump and the alternator. If the belt snaps, the alternator warning lamp is meant to come on but it's hidden behind your left hand and the steering wheel, so likely you might not notice. Or you might assume it's unrelated to cooling and carry on driving. The cooling system has no over-temperature warning lamp and the temperature gauge is also obscured by the driver's left hand. First thing I noticed was an explosion of steam from under the deck, only then did I notice the temp gauge was off the scale. The oil pressure gauge and integral warning lamp, are also badly placed and usually obscured. I decided to fit extra warning lamps for ignition and oil pressure either side of the fuel gauge where they are always visible, ultra bright LEDs noticeable in full sunlight. If either of those comes on I know to kill the engine immediately. All down to an idiot mechanic who fitted a new water pump and alternator and belt, without noticing the pulleys were not aligned. The belt shredded itself after fifty miles.
@davidmoult5770 Жыл бұрын
@@markbowden7238 what a lesson.
@davidmoult5770 Жыл бұрын
No, I practice perfect mechanical integrity. It was more of a thwack.
@torbulonski Жыл бұрын
Great video. Can explain how you wired up the fuel pump? Thanks in advance.
@davidmoult5770 Жыл бұрын
One wire to earth, there is a multi point earth at the left of the engine bay. The positive wire across the back of the engine to a positive on the coil. Thanks for watching.
@robertwestinghouse40982 жыл бұрын
Brilliant
@paule79214 ай бұрын
What abour heavy rain soaking all the electrics in the engine compartment through your mesh - warning my old one toke sown on the oustide lane of a motorway in heavy rain soaking. New buyer may regard this as ruined and dangerous and potentially costly re prompoting rust