FIAT500 GEARBOX CALIBRATION ALFAOBD

#Fiat500
#Alfaobd
#Dualogic
#DIY

[@vincentsmethurst9183]

Mate thankyou so much. You just saved me a heap of money I think. I appreciate it so much and would buy you a beer if I could. Cheers V

[@NORIZOUSAN]

I’m glad to hear my video was of help to you. Why don’t we drink beer together till dawn if we had any chances to do it!

[@vladatanja1]

Hi. Can OBD make calibration on Lancia delta 1.6 robot? Did have this option?

[@NORIZOUSAN]

Sorry, I don't know about the Lancia Delta.

[@vladatanja1]

​@@NORIZOUSAN sorry, one more question, is this diagnostic from app store? Becouse I find on app store the same one and I look demo and it have option for Lancia gearbox.

[@NORIZOUSAN]

The paid version has all the features. The demo version has limited features.

[@NORIZOUSAN]

Please watch this video for compatible vehicles kzbin.info/www/bejne/j4CzdJRtaa6Dndksi=cGrYGevhU5WhLQtg

[@ugor1984]

For punto evo gearbox diagnostic is two choice of control unit. Marelli selespeed can cfc300 and cfc328. How can i to know wich is correct? Do you have any sugesstion?

[@NORIZOUSAN]

There were several types of missions for my FIAT 500, and I didn’t know which one was suitable, so I tried all of them one by one. You’ll find the correct one if you check them all.

[@ugor1984]

@@NORIZOUSAN thank you a lot (:

[@HimWanderer]

Hey, greetings from India. Would appreciate your help on few points. Does this ELM327 module allow to access all the features, if not, can I do proxy alignment on Fiat cars using a compatible cable using this application? To be very specific, i just want to calibrate my speedometer post a tire size upgrade which is off by approx. 4 mph(6.4kmph) and unfortunately I'm getting tickets for speeding

[@NORIZOUSAN]

sorry. I don't know how to configure that

[@emreberkol2805]

We replaced clutch after that gearbox shaking car when gears go to 3 from 2 . Can this progress fix this.

[@NORIZOUSAN]

I’m not sure replacing the clutch will fix the problem. When replacing the clutch, you’ll need to do clutch calibration.

[@uniqueexperimens2211]

I put the selspeed gear to all the way up and then put it back is it because of this

[@NORIZOUSAN]

Unfortunately, I wasn’t able to understand your question. Could you tell me what you wanna ask me in detail?

[@somogyiandrasofficial]

Is this the same as an automatic transmission reset or adaptacion?

[@NORIZOUSAN]

It’s not reset but calibration. You can adjust the tool to make it Criterion value

[@rafiekahmed8568]

Hi thanks for sharing such a practical and informative video.How and where can I purchase this software many thanks Rafiek

[@NORIZOUSAN]

You can purchase it on Google Play

[@rafiekahmed8568]

Hi does this software work on Apple iPad

[@unknown1.6mjet]

A few mechanics say that after this process, the calibration is not completed without stopping and starting on the road. Has anything changed after doing this?

[@NORIZOUSAN]

Calibrating corrects shift timing deviations

[@DigitalHavenTech]

When I do it for my car the app says test successful without doing the test, I can't hear any noise of it switching from one to another. is it the app malfunctioning or is the problem with the car itself and what could it be? I can't drive the car in peace, the whole car shakes when I am on the first but then proceed to drives until I have to stop and it comes back.

[@NORIZOUSAN]

www.alfaobd.com/index.html

[@Sansan-zw5bp]

Is it necessary to press the brake pedal during the calibration process?

[@NORIZOUSAN]

You don’t need to press it during the process.

[@AleGluck90]

Wich obd2 adapter are you using?

[@NORIZOUSAN]

I use ELM327 V1.5 to connect to AlfaOBD with Bluetooth.

[@AleGluck90]

@@NORIZOUSAN I am using 2.1v and not working at all. It only connects to Bluetooth but when I press conect to Body computer or Engine, not working

[@NORIZOUSAN]

I was able to use AlfaOBD with my tool, “v 1.5”. “v 2.1” may not be available in AlfaOBD. I recommend that you check available tools on official website. ↓ www.alfaobd.com/index.html

[@longhuynh5249]

Hi, thank-you for sharing. Can you please help me find this obd11 and software. I would like to calibrate my GT celespeed. Thank-you very much.

[@NORIZOUSAN]

You mentioned “GT Celespeed”, so you want to search information about alpha Romeo? For compatible models of alpha Romeo, please refer this video. kzbin.info/www/bejne/j4CzdJRtaa6Dndk

[@jany99]

👌👍

[@NORIZOUSAN]

thank you🤩

[@AleGluck90]

Because I am using a Lm337 with alphaobd and I can connect to Bluetooth but then not working to ECU

[@NORIZOUSAN]

ELM327 v1.5 was able to connect via Bluetooth

[@uniqueexperimens2211]

Hi there i try the alignment but instead of Neutral it makes reverse the neutral did i do something wrong the car was moving before and running nice but now i did this and in the dashboard it says its neutral but in the gear itself its on reverse can you help me please

[@NORIZOUSAN]

Unfortunately, I wasn’t able to understand your situation. Judging from your comment, the problems you faced might’ve been caused by your car itself, not Alfaobd. I recommend you have your car checked in an auto repair and maintenance factory.

[@DigitalHavenTech]

Are you talking about the gearbox lever ? does it show that you are on reverse while you are not

[@joselemus6896]

Hi, can this tool do a proxi alignment on fiat 500???

[@NORIZOUSAN]

I have never done that operation. Maybe you need a dedicated cable to do proxy alignment.

[@NORIZOUSAN]

Probably you can do proxy alignment if you use this cable. www.amazon.com/MultiECUScan-FiatECUScan-Adapter-Diagnostic-Scanner/dp/B07PFK6YL2

[@kmtlau21]

Hi, can this tool do on Abarth 500 too?? What software are you using?

[@NORIZOUSAN]

The software I used in this video was “alfa obd” and used it with my Android device. You can use this software with your Abarth 500.

[@kmtlau21]

@@NORIZOUSAN Thanks

[@kmtlau21]

@@NORIZOUSAN Did you buy the full version?

[@NORIZOUSAN]

I bought the full version

[@kmtlau21]

@@NORIZOUSAN Hi, when i go into the gearbox, it has many unit to choose cfc319, cfc328.......How can i know what unit my car is using? Thanks again!

[@orhanlatifkizmaz]

not working except first gear and reverse gear

[@NORIZOUSAN]

www.alfaobd.com/index.html