Sorting out the problems with gearbox FIAT 500 Selespeed

[@johnmatic7344]

Thank you! I never would have thought that to change the transmission fluid I'd need to reconnect the battery and open and close the door. Simply Italian!

[@Zer0Freq]

for folks down under and Aoteroa you can use Penrite LDAS full Syn fluid. meets the same specs.

[@arun2all]

Thank you ! I had same car not moving out of N problem with fiat punto 2013. I flushed out the oil as per your video. Now the car drives fine. Owe you a beer. But still I want to do reprogramming, would you pls share screenshot of the steps ?

[@countryman_lk]

Mate, I have a serious issue in my fiat grande Punto evo 2009(auto petrol(, its not shifting gears , when applying specially the reverse gear , it’s grinding and soon vehicle turns off automatically. It’s not applying first gear too, sometime when I apply drive mode and try to move it by pushing with friends it works , but now completely not moving and my repair operator removed the clutch and it was okay , he says many things after one by one first he said it was with alternator but now something else. Now says need to have an AMT repair kit to work with salesppeed unit, what could be the issue with me, if you have any idea plz tell me, I’m fed up tatally with this.

[@savetheplanet749]

Hi! Hope, you`re well. Have you tried to scan your car? What are the fault codes in engine and in gearbox? Robotic gearbox is really nightmare, I can imagine your feelings.

[@countryman_lk]

@@savetheplanet749 dear friend, would you be able to assist me if I let you know the codes , tommrw I would be able to contact my car-repair man and get to know about it. I will tell you. Thank you very much for the reply

[@savetheplanet749]

@@countryman_lk no worries. I'll try to speak with my friends who knows much more, than me:) hear you soon!

[@davecin6223]

Hi mate, can you post the link to get Proscan adaptor? can only get Proscan wifi on eBay but no USB type. Thank you!

[@savetheplanet749]

Hello! Try to type on eBay search -"Multi Ecu Scan ELM for Fiat". I've used that one

[@evgenio.3863]

привет. не подскажешь где находится сенсор заднего хода на каробке передачь?

[@אריאלסטרול-ה4פ]

Wow u the only explain how trak oil out. How u teak pump tube out ? Just scrow it ? Please answer thkns u. I yeak shield of heat, but wed dont know how drin it.

[@savetheplanet749]

Hi! Yeap, just screw it out. There is nothing special:)

[@amansandhu6001]

Can any please mention the oil full name

[@AliAbdulsatar-de1zf]

Hi there, I got 500L 2013 dualogic semi auto massage on the dash transmission fault sometimes stopped shifting to gear and doesn’t move Code p2930-85 Oil transmission ok , new battery, recalibration all done still same Any idea please 🙏

[@samibengueddah5455]

Have you find out this problem ?

[@YumerCrazy]

Hi mate can't see your email, are you close to Wakefield area to sorted my fiat 500 please? I have same problem. Thanks

[@arbarof]

Im having the same problem with my wife Fiat 500L 2014. Is there a way I could contact you tho.

[@Orientalvlogger]

Hi i can not get the codes removed with computer i took my fiat punto 2013 semi auto to a few garages but no luck. Any advise?

[@savetheplanet749]

hi! what`s the code?

[@Orientalvlogger]

@@savetheplanet749 Hi no code just says on dash: start & Stop unavailable and Fuel cut off unavailable

[@FabioCorteseOfficial-ob4bc]

Hello, thank you for the video. I did the replacemente of the oil which was almost at one third of the necessary. But i didnt act on the computer changes. What is the problem i could have?

[@savetheplanet749]

Hi! Assume, just after some time, the system will be calibrated automatically. Should work in that way

[@samibengueddah5455]

Hello .i have the same problem .how can i contact you please ?

[@travelandtech2185]

@@savetheplanet749 Hello. dıd your fıat work normally after changıng the oıl and not usıng the computer? should ı go ahead wıthout computer

[@savetheplanet749]

​@@travelandtech2185yeap, the oil needs to be changed every 2 years👍🏽

[@brianrush2922]

Hi Great video my issue is the final calibration has an error and not completed there's no error codes stored just the error at the end of the calibration N/R selection error? any help would be great thankyou

[@savetheplanet749]

Hi, mate! Check the rules in description of the calibration, there should be information before you start. Maybe broke one of the rules?

[@brianrush2922]

@@savetheplanet749 thanks for the reply mate but ive checked all the rules and seem to match ok. it runs through everything but errors on completion, Totally baffled

[@savetheplanet749]

@@brianrush2922 can you try to make a photo of the error?

[@panagiotisbailos195]

What kind of program you are using?

[@masoodali151]

Can someone help me find a gearbox for my 198 bravo2 the number on the gearbox is CFC300F.01 selespeed 6

[@hayderalavioo4618]

Hi mate, I have tried to email you however your email doesn’t seem to come up.. could you kindly confirm it to discuss. Many thanks

[@savetheplanet749]

hi! yeap, you need to calibrate it when everything is done. Of course, cleaning all the errors in the gearbox in advance.

[@mikeworthington1924]

thanks!

[@hayderalavioo4618]

I have just emailed you 👍

[@evgeniyyakakbi]

Пришлось учить английский

[@johnhuwroberts7766]

Easy……don’t buy one……..mine bankrupted me.