fiberglass boat building part 1 sida loo sameeyo doomaha somalia

[@ryszardjacekrusniak7993]

I learned how to make a mold super easy way... pure ingenuity, thanks for sharing and all the best !

[@master_som]

You welcome dude!...

[@juliansemenuk2727]

Can you please tell me how you learned to make a fiberglass boat mold and how you do it?

[@captsirl]

NO You learned how to do everything wrong here. SHIT HOLE BOAT WORKS

[@PA96704]

@@captsirl what would Noah say?

[@HighDefinitionVideo]

Oshwat? Hard working people. Much good fortune for you and yours.

[@master_som]

thank you very much

[@ChannelX24]

Cool video man, its a fast method for building hulls. Get a mask and googles for grinding fiberglass or you'll no be long for this earth - shit is nasty to breath in.

[@thomasritter3159]

Going about it ass backwards. You build a boat -- make it the plug. Pull your mold off the plug. When ready to build another boat wax the inside of the mold (which is smooth). Lay a coat of gelcoat on the inside - let it get tacky - spray or lay your fiberglass in layers. When hardning is complete fill mold with water and the boat haul pops out with a smooth finish which is already gelcoated to the color you want. Then run your stringers and finish boat.

[@liamwilliams7782]

Mate these look like there in the middle of Africa I doubt there spraying or waxing anything you seen there way of stopping the build from getting to hot & masking tape to stop it sticking haha yes it's a shoddy way but for what resources they probably have its quite a decent build so maybe stop and think about others before you comment your bullshit as not everyones blessed

[@dougalannh]

For a Somalian fishing boat ? Riiiiight.

[@tibfulv]

You hear stories about African ingenuity, but this is the real deal.

[@daniellevi1287]

Your boat looks great! Thank you for sharing your knowledge with us! I built a boat for my kids in my backyard earlier this year using plans I got from *BoatPlans.4YourHelp. Com* (remove space and open the website) Clear directions and an accurate materials list...It was great for a novice builder like myself!

[@master_som]

Thank you bro. Good luck❤

[@ultralinx200]

Well, thats how they made their boat, it is what it is, its not the boat you like? Build one! This boat, i believe, is what they use EVERYDAY for fishing.

[@huguesavy1063]

what number of layers of fiberglass is necessary to obtain this result?

[@jbcjr1357]

how many layers of fiber glass did you lay on it sir?

[@dds8586]

Класс!!! Подскажите, сколько слоев стекломата уложили? Какая толщина стекломата?

[@watcn6371]

HEY GUYS! PLEASE HELP ME! 1- What we use under the glass fiber to prevent it from sticking on the band or mold?? If we don't use anything , would it stick to mold?? 2- When we use gelcoat?

[@DC-uo5hy]

Use Wax, melt it and paint on. Smooth with torch heat.

[@JOHNTNT]

That song is my alarm 😆

[@darrylmcleman6456]

Suprising to see that done under direct sun!!!

[@waikikin]

Nice UV cure:)

[@master_som]

We are in Africa, the sun is always hotter and we use work under the sun

[@darrylmcleman6456]

@@master_som I am living on the west coast of Canada where it doesn't often go above 70 deg. F. I was given an old fiberglass boat that I have replaced the rotten wood in.Everyone advised me to put up a shade but I couldn't so I worked before the sun came onto the job or after.There is a warning on the plastic jug the resin comes in about working it in the sun but it is not as hot here as in Africa.I enjoy your videos.

[@nesamosaku551]

what is the blue stuff they are painting & the white sheets?

[@joeljesus8577]

Nem sei como cheguei aqui! Tem um vídeo dando continuidade no serviço de laminação de fibra e o barco na água? Agradeço

[@ВладимирПодопригора-ы3р]

Ну в общем то неплохо. Вот толтко почему скотчем матрицу клеите? Пленкой пвд "стрейч", было бы горащдо быстрее и легче. Ну а там, как вам удобнее. Молодцы

[@cavalliphoto]

Encomiabile lo sforzo nonostante gli scarsi mezzi! Il risultato potrebbe essere migliorato con piccole modifiche al processo! Certificazione ambientale, dpi e sicurezza, aree a norma, scarico materiali di risulta, certificazione del processo, autorizzazioni, tutto a posto??

[@amifilmchannel727]

Perfect making boat.

[@libyalibya1192]

How many layers of fibers to make the finished boat

[@JayB-ju9vc]

What are the boat moulds make out of concrete??? 🤔

[@sdmp78]

Better quality and craftsmanship than a tracker boat from bass pro

[@chapmanflorida5226]

r u fuckin blind LOL

[@juanm385]

the pink paint that they put at the end What does it contain

[@fabianotero1794]

Buena mano de obra !!! Q pena q no limpien donde traajan

[@mamalop311]

Masha Allah ilaah haidiin barakeeyo

[@master_som]

Aamiin

[@madisonoceanna4416]

The background song is my LG ringtone

[@master_som]

LG is our favourite

[@saulrios8326]

@@master_som all the time, stupid comments

[@randallharris1608]

great job but did you have to use a ringtone for background music? i used that ringtone for years.

[@theoevans7771]

Lol

[@HenauderTitzauf]

I think that transom is gonna add a ton of weight to that flimsy hull. And Oh, they sand the inside for appearances? Geezzz! Oh yes, has anyone ever owned a fishing boat that Sears sold many years ago, under the name of Ted Williams Sports gear? Well, I did, and it was just about as flimsy as this. I bought one used. Many parts were as thin as this. Sold it to my stepson. He left it out in sun, eventually it just crumbled apart. Looks like they have more than one plug, guess this is one of them custom, special to order shops. Guess all the lead paint will help with stability.

[@vanuideas8286]

Hey there boss, can you give me the name of the glue your using. Because you are using in the sun but it cannot get hard fast and here the glues i use get hart in second and I'm in the tropics, so pliz pliz pliz help me with this🙏🙏🙏 God bless Somalia 🙏🙏🙏🙏

[@allnineandsix9457]

How many meters your longest boat?

[@KHEYRAADKADALKA]

Doonta kaligeed oo cusub oo aan matoor wadanin meeqaa lagu sameeyaa,fadlan ii soo jawaab hadii aad fariintayda heshid

[@master_som]

$1800 walaal

[@tivaughnjenkins9898]

How many layers of fibre glass did u use

[@hamidkhanlodhi3253]

What kind of material they use name plz or liquid is this ...I have an idea of something creat new

[@MrT13]

As they say with rope. If you can’t tie a knot tie a lot lol. Wow

[@sjoncb]

Can you elaborate?

[@MrT13]

@@sjoncb maaaaan lol. That’s a looooot of glass. There’s free videos on here about how to lay fiberglass

[@sabinakhan2216]

hello please I need to know before putting boxing tape do u apply anything on the boat

[@waryaamaanta168]

No they don’t you can cut Ston like a boat and put tape Before you put anything on tape put mold release agent 4 times that will help you

[@RamadhaniNgajeni-uu6tb]

Habari hago material ya kutengenezea Yana galimu shingapi Hadi kukamilika?

[@laserbeam002]

I never thought of using masking tape to release the fiberglass from the mold. Great.

[@Templeman420]

Release wax is the same price as a single roll of tape. Works better actually. Pva is also cheaper than a roll of tape.

[@dougalannh]

That plug is extremely rough, I doubt a hull would come off of it using any other method,

[@jansaglar8248]

Should be titled, building a boat in a landfill site.

[@familiamotarica6616]

this is so smart!!!!!

[@rafiuddinabdulkarimabdulka8626]

there are just safe the budjet for mould.like everybody know boat mould is more expansive then new boat.

[@donghan6974]

working with fiber glass AND polymer glue without any protection！！

[@master_som]

please check our channel to know about FIBER GLASS. THANKS!

[@virleytigre]

Fibra de vidro e inofensiva..

[@rcdogmanduh4440]

Some people will comment with out thinking first, you work with what you have! People that do... do! Those that can't just throw rocks grow up people and think for yourselves!

[@Deltax1519]

I think the title should be, how to build a Somali pirate boat!

[@Heimatar]

Ar sharooro aa la qaasiyay,yaaqay saan ma ahee saan wax ka badala reer dhabarweenoo.

[@vladnickul]

You know you did a great job when you need to cut the pice out of the mold :))

[@dinacaldwell7522]

That has to have dry layup spots. I wouldn’t trust my life to that. Shoddy craftsmanship

[@raymercado3650]

Great job Master Som! What are boat moulds made off? Can you show How the moulds are made? Thanks Ray

[@master_som]

We will make a videos about ours.

[@rickgillis1613]

the pro's have 2 or more piece molds. They apply the gel coat to the inside of the mold, then the resin and fibreglass onto the gelcoat inside the mold, then put in structural supports etc , they then split the mold and pull it apart

[@viewer4247]

Part 1 should be the mould

[@sunilkumararickattu1845]

Why this tape fixing?

[@Brian-ez5ib]

The lazy way they work would tick me off - Limited time before resin kicks -Also important resin penetrates mating

[@felixdiaz563]

I guess the amount of hardener works very well, because if it does not dry quickly and it would be wasted

[@Raffy1963]

How much for one boat

[@clevelandmortician3887]

Anyone notice the "extension cord" ??

[@canalrosa8146]

Muito bonito o ceu barco

[@musmusmeong]

Panjang dan lebar nya brapa om

[@christianwolf6646]

Asa magkano po pagawa nyn

[@HasbaraBuster]

Thats the boats for the African migrants to Europe

[@master_som]

It's for fishers

[@master_som]

kzbin.info/www/bejne/iKWQZ2d_dtegpsk Please watch this clip

[@HasbaraBuster]

@@master_som ok, no harm meant. Keep up the good work.

[@tibfulv]

@@master_som Figured, lol. They're a bit small for ferrying.

[@deryand590]

Berapa lapis serat fiber nya om

[@tc6386]

What type of releasing tape is used hare please show the name of releasing tape .

[@master_som]

Packing tape

[@jacksbackable]

Yep! I expected it would react with the resin!?

[@JuanMiguelGarcia1969]

Au secours les génies du brico.

[@d3891]

Hey can you take a mold in the same way but from a wooden boat?

[@tibfulv]

I imagine anything that has the shape can be used. If you want the exact same size, you first make a negative, and in that you make the outer skin.

[@thomasritter3159]

Yes. Fiberglass the outside of the wooden boat. Sand until really smooth. Wax the haul. Spray gelcoat onto the waxed haul - while tacky spray several layers of fiberglass chop onto the gelcoat. )What they are doing in this video is ass backwards.) You will need to have provided a spot to hook your hose up to the mold. When the mold you have created is hardened fill it with water and the boat will pop free. Now you have mold of that boat haul. When you are ready to build boats just wax the inside of the mold and reverse the process. Lay a coat of the gelcoat in the color you want the haul onto the mold, wait till tacky. Spray sevrral layers of "chop" fiberglass onto the gelcoat. )You will need to put an outer frame on the mold to give it strength. ( When the new haul is dry hook the hose to the fill connection (on bottom of mold) and pop the new haul out. (First run your stringers in the haul and braces across the haul.) Proper way of building a good, strong fiberglass haul. In Lafitte, Louisiana they build boats for shrimping and dredging oysters from 25 feet to 55 feet with this method.

[@d3891]

@@thomasritter3159 Wow thanks for your reply...couple of follow up questions if you don't mind...where exactly do you put the hose with water...in the wooden boat or between the mold and the wooden hull...and also is there a way not to fiberglass the wooden hull in the process as i wish to leave it as it is since it is a functional boat...cheers Ed

[@samarisland4186]

what is the size of the boat?

[@master_som]

7 miters

[@canalrosa8146]

qual é a metragem do barco

[@crucialfarmsurbanandfresh]

All that money in fiberglass glass and nobody has a shovel a broom or a rake. Shit clean up your work area. There's no way to be productive tripping over crap all day 😂😂😂😂😂

[@p.santos6644]

Exactly 🤣😂

[@user-dq7ms8ir4c]

i was thinking same shit

[@davevideo332]

I think you missed the point. Too bad.

[@user-dq7ms8ir4c]

Dave Video what point is that, whether in the islands or the hood, the surroundings look the same?

[@davevideo332]

@@user-dq7ms8ir4c Missed again.

[@Marcenaria.penhafiel]

Amigo qual nome dessa fita amarela que voces passam ? Voces passa algum produto antes de aplicar a fita ?

[@master_som]

é apenas uma fita de caixa

[@Marcenaria.penhafiel]

@@master_som alem da fita voces aplica algo produto antes de colocar a fita? Para facilitar a remoção da mesma ?

[@Marcenaria.penhafiel]

@Maquinas Artesanales e Industriales que tipo de poliéster ? E um líquido ou massa ??

[@Marcenaria.penhafiel]

@Maquinas Artesanales e Industriales mas seria algum tipo de polister específico ?

[@Marcenaria.penhafiel]

@Maquinas Artesanales e Industriales aplico o poliéster e depois passo as fitas e logo apos a fibra correto ?

[@fayzemourie7776]

THE PLASTIC WAST MUST BE KEPT IN A CONTAINER PLASTIC TAP REMOVED AND DEPOSE OFF THE RIGHT WAY OR BURNT IN SPECIAL WAY

[@pedrocamaiora1095]

wich tipe of tape is that ?

[@master_som]

Packing tape. Tape used for Cartoons/packs

[@oklahomacrabber]

Nice! Thanks

[@FISHONBAH]

Wow.. Good skil.

[@ERWIN6352]

How Many layers of fiber glass do you use for this project

[@shangphodsung1530]

Good job

[@truckerdaddy-akajohninqueb4793]

That's détermination ❤️

[@nelsongilbert1695]

How do u get the hardened epoxy off your toes?

[@rcdogmanduh4440]

Not epoxy!

[@ultralinx200]

Let it be a part of your 😅

[@kevstuff100]

So that's how pirate skiffs are made

[@suljachannel8747]

Daerah mana

[@cosimotaglienti2414]

Vorrei una informazione?

[@kuschanel5770]

Wow keren

[@claudebalestrat6913]

greenish blue patches are a sign of uncured resin , poor mixing = soft spots will never cure and cause osmosis and rapid de-lamination . guess Somalian pirates are not looking for longevity.

[@waynerainey2606]

Nope, average lifespan of one Somalian Pirate ship is "one misidentified ship" You know, the one that shoots back and with a lot more fire power!?

[@ariestroyguanzon6024]

460 1st layer 2nd again 600 coat puting layer 460 coat again wrong applying method ur using fiber

[@master_som]

Yes, correct

[@marinanovadi4622]

Mais c'est quoi ce délire et ces conditions de travail déplorable offfffff

[@hashim64]

used cooking oil spray on mould

[@kingdaniel3731]

is it working instead of wax

[@shansreef7448]

These videos that play music and show pictures without commentary and description are almost worthless. What's happening? What is the process? What materials are being used? Why? How long does it take? What's next? Give us something.

[@danieljohn9342]

Is that a samsung galaxy ringtone

[@noelrosales8105]

That's the method how they make pots in cebu.

[@jappecoco]

Nice info, thx for sharing

[@wacimo16]

i like it

[@master_som]

thank you

[@josemirmauricio1644]

Papel alumínio ou óleo mineral da pra fazer isso, é bem mais prático e rápido

[@novinursafitri1408]

how many layers of fiber?

[@master_som]

is different from 2-3-4 layers

[@guytero8812]

No gloves, masks or any safety gear. OMG.

[@davecronce3127]

OSHA approved.

[@Barra_Barbar]

my ringtone i think my phone

[@diyrvsolutions1235]

NOOO ! FOR SO MANY REASONS 1

[@sjoncb]

Can you explain?

[@gnrkbgtr]

Toque de celular é foda kkkkkkk

[@Алекс-г2щ]

Пираты?! Pirates?

[@buyukturkiston9615]

Что у Вас там нет стрича?

[@FlCoastalcaster]

This is a perfect example.. If Life gives you lemon make lemonade.

[@pastovasquez1858]

Nothing is impossible unless you give up.

[@pastovasquez1858]

It true just living the life is a challenge but with ideas you can make easier.

[@udatourisland15]

Where it is...???

[@notafuckinpplperson8233]

Asok Tungku somewhere where the apparently haven't discovered trash bags yet

[@jacksbackable]

Africa!

[@metropcsamazing2865]

Im gonna think of this video when i hear my phone ring 😅

[@saulrios8326]

Another one 🤦‍♂️

[@Blackford86]

The question you should be asking is How roll of tape did they use 😂😂😂

[@master_som]

10 rolls of packing tape

[@alfgjelsvik2286]

you miss many ;-)

[@nabilguzani7823]

❤️❤️❤️

[@oldschooldiy3240]

I refuse to believe they can't get some wax to use instead of tape....

[@dougalannh]

That plug is extremely rough, I doubt a hull would come off of it using any other method,

[@oldschooldiy3240]

@@dougalannh Yeah....no....boat manufacturers use a releasing wax on fiberglass hulls....these guys could do the same....and definitely be less plastic waste for sure!

[@mztv6706]

+new my friend

[@hashim64]

we use wax ,mould release wax

[@hashim64]

can use margerine kzbin.info/www/bejne/eKfcq6uqqL2Lr5I

[@dougalannh]

That plug is extremely rough, I doubt a hull would come off of it using any other method.

[@juliansemenuk2727]

What is the mold made out of?

[@mortonmorton6083]

Concrete so you build a ruff wooden boat to the hull shape you want fill it with Concrete flip it over then you can do this