Fierce LEGO TIE Advanced MOC! | Star Wars Detailed Custom Build

Get The Instructions Here: www.brickvault.toys/products/...
Subscribe for more Lego set unboxing! ► / @brickvault
Instagram / brick.vault
Twitter / legobrickvault
Facebook / brickvault
We love fan mail here at the studio! You can send packages and mail here:
Brick Vault
6755 Mira Mesa Blvd. Suite 123, #414
San Diego, CA 92121
USA
Check out our Twitch page for live stream recordings!
/ all
Live Streaming Schedule: Monday - Friday 11:00AM (PST, Pacific Standard Time, California)
More Lego Videos!
Lego Custom Builds MOC: • Lego Brick Vault Instr...
Lego Star Wars Sets: • Lego Star Wars
Lego Batman Sets: • Lego Batman Sets
Lego City Sets: • Lego City Sets
Lego Ideas Sets: • Lego Ideas Sets
Lego DC Universe Sets: • Lego DC Universe Sets
Lego Marvel Universe Sets: • Lego Marvel Universe Sets
Lego How To: • Lego How To
Lego Holiday Sets: / playlist
list=PLHttrZC-uXId4mSi7xwisu0Ab9ZLgwB5z
Lego Minecraft Sets: • Lego Minecraft Sets
Lego Dimensions: • Lego Dimensions
Lego Technic Sets: • Lego Technic Sets
Lego Ninjago Sets: • Lego Ninjago Sets
Lego Minifigs: • Lego Minifigs
Lego Bionicle Sets: • Lego Bionicle Sets
Lego Scooby-Doo Sets: • Lego Scooby-Doo Sets
Lego Creator Sets: • Lego Creator Sets
Lego Jurassic World Sets: • Lego Jurassic Park - J...
Lego Cars: • Lego Cars
Lego Ultra Agents: • Lego Ultra Agents Sets
#Lego #unbox #toyreview #MOC

[@hatmann5697]

This is the only time I'm putting in the effort to get all the pieces for a MOC

[@soundblaster1987reviews]

I love the smooth design and the use of tiles on the wings to minimise the exposed studs. If Lego don't make this official, I will sue them for neglect! This thing is the Lego Star Wars equivalent of the Transformers Masterpiece vehicle modes for detail and accuracy.

[@samhass1879]

Why doesn’t LEGO make these? This could be UCS in a smaller set! I’d pay for this!

[@eustacebagge6852]

1. these sets can get really expensive 2. these builds can get really difficult and the average builder would find these difficult

[@ghostlydurpy]

@@eustacebagge6852 1. It can be a Pseudo UCS set (Ex. The Child, Helmet Series, BB-8, etc...) 2. Make it an 18+ set (Ex. Helmet Series)

[@whippyfc]

@@eustacebagge6852 3. They don’t meet the quality/strength requirements

[@The_Starscourge]

Instead of Ultimate Collector Series they could make a Collector Series that are smaller, minifig-scale sets that are more detailed and not intended to be played with.

[@Shamimfarsi]

This is what I was looking for. Today I purchased it from your website. You deserve recognition and payment for this. Thank you so much. With this set, I can say that my Star Wars collection is now complete ("The circle is now complete, when I left you I was but the learner now I AM THE MASTER"). GREAT AND AWESOME DESIGN. Episode IV Nostalgia!! Love it!

[@northernlego1884]

These Tie fighters are simply stunning. The attention to detail and accuracy is astounding. I especially like this Tie advanced, it just looks SO good!

[@merm960]

Looks amazing! I would love it if Jerrick creates a TIE Defender!

[@tomf4000]

Hello There

[@kubla9834]

Dead meme stfu

[@Who-vm7rq]

kubla 98 dead meme? Gtfoh

[@GoforthJonah]

General Kenobi GENERAL KENOBI

[@DarthVader-pl5ts]

I HATE YOU

[@rolfgrell4783]

General Kenobi!

[@josepinto3870]

Both the Tie Advanced and the Tie Interceptor from this collection are the best that I've seen as a lego recreation. Great Work!

[@dustinhughes7643]

Probably one of my favorite Ties. Amazing MOC.

[@lucasley8643]

Jarec should make the tie defender and tie phantom

[@lifebricksjo5521]

Why not

[@davidpeters4334]

That would be awesome!

[@capkhi5070]

Defender over phantom plus its canon now

[@Meioh1]

Why does every EU/legends fan love the tie phantom? It's so ugly! The tie defender is ugly but in a kinda cool/unique way and now being canon has made it even more popular. The phantom on the other hand just looks like one of the other random/ugly ties like the tie bizarro

[@seanstapleton8046]

Still waiting on a better TIE Striker. Rebel Builder’s TIE Defender is pretty BA, go check out his stuff. He’s got a phantom too...not sure if those instructions are for sale, but the TIE/D is for sure.

[@heylookitsyoda6506]

Yes! This is exactly what I wanted!

[@yoamal1187]

Omg i love the cockpit

[@Edbricks]

the coolest moc ever

[@Cmmdre977]

Ed bricks it’s second to the tie interceptor

[@napoleonicinfanterie6377]

Ed bricks 100% agreed

[@darthbane2669]

coolest moc ever? Have you seen the ssd, or the sand crawler or the at at's? You have very low standards.

[@Routineishealth]

Amazing favorite model!!! Man LEGO should make sets like this this is wonderful!

[@GingerBricks]

It’s amazing I love it!

[@GalacticBricks]

P L E A S E D O A TI E R E A P E R

[@soundblaster1987reviews]

Oh my Primus, I need this thing RIGHT NOW!!!!!!

[@scp-4093]

tie defender has joined the chat

[@lonestarr_sixer9554]

love to see this MOC creator do a TIE Defender

[@LittleSproutsTV]

Hey guys, just discovered your cool channel. This looks soooo good and you did such a great job with this review, thanks for sharing

[@Arezius]

Awesome design, good work!

[@gamerperson194]

How is this not the original by Lego? It's so much better than the official one by Lego!

[@antoniocorella5939]

I've been highly anticipating this since I saw it on your Instagram!!

[@classicalricky]

the opera music you had in the beginning was just perfect.

[@adrianrosenlund-hudson8789]

Beautiful. I have the TIE bomber from Brickvault. This is next. I'm ordering the instructions tomorrow!

[@elijahkoufos4638]

That’s frikkin Awesome! 👏

[@stielimusterman3066]

Would love that as a set!!!

[@charlottefuentes4906]

that is the perfect size!!

[@brandonlozano1695]

Beautiful 😢👏

[@minifigminute6072]

That is pretty awesome :) that you used smooth bricks for the sides.

[@charlolego]

Love it looks so cool!

[@CuppaTeaExe]

I knew this would come next!

[@rolfgrell4783]

Now I am missing the TIE defender and TIE sk/x1 experimental air superiority fighter, aka TIE striker. P.s.: And of course the TIE reaper

[@sliplslapl5431]

This is a very cool minifig moc

[@jaredmcnair6757]

I'd love to see a Tie Punisher MOC from Jarec. That would be amazing

[@jacobschnabl4457]

Impressive, most impressive

[@ceeway0127]

The fierce is strong in this one.

[@graustufenpapagei5223]

The best TIE so far!

[@scp-4093]

tie defender: ARE YOU SURE ABOUT THAT

[@BrixTremeGeek]

I have this, the tie bomber and tie defender and love love love all 3❤️❤️❤️❤️❤️❤️

[@brickmonkeyvideo2150]

Great work!

[@mexicaneagle9080]

I'm just waiting for the TIE Advanced Prototype ( The Grand Inquisitor's Tie Fighter )

[@andrewchapman2024]

Hello gorgeous. Theas tie fighters are awesome. I think we need to start seeing some x-wing and a-wing designs. But all in all, very good collection so far.

[@sarahdain6338]

i had the pre-production sketchbook for A New Hope, the TIE Bomber was Originally a Boarding Craft to show how the Empire transitions from Star Destroyer to the Corvette, but was scrapped become the Bomber in ESB.

[@captainlink72]

We actually see the TIE Shuttle (which looks highly similar to the TIE Bomber) in ESB as well.

[@cindi9935]

Let's alot of smooth pieces

[@michaelabrahamt8651]

I love it

[@kaimanzo1999]

Bruh this looks so good, when I saw the thumbnail and didn't read the title I couldn't even tell it was Lego

[@romanrimlinger9852]

Guys, go work to lego, and make all yours scales mocs became official ^^ !!!

[@jimmyandrews3963]

I hope the TIE Defender is next

[@brendachavez6213]

Awesome

[@BDG69420]

He totally needs to do a tie defender. It would be sooo cooool!!!!

[@SHADOSTRYKR]

This looks way more accurate than the official lego kits.

[@ig-8861]

True but Lego has to account for cost per piece. If Lego were to do this they'd have to push up the price quite a way. Which to a layman (the general consumer) would just look like Lego is charging crazy amounts for relatively small sets. Which they kinda already are.

[@markgreenough8602]

It looks amazing! One question... does the bottom have any studs that will allow attachment of a stand?

[@_sekremmlin_8274]

this design is so awesome, just bought the pieces for it. i am so exited to have it finished on my table

[@juliozabre1446]

How much did you spend on ordering all the parts?

[@saideveshwar1865]

Julio Zabre,it’s about 16 USD!!! Amazing Deal!!!

[@GeneralHugo1]

16 USD is just the instructions :D parts are about 100-150

[@thecreatorlair]

What would your rendition of the Rogue Shadow from the Force Unleashed look like? The mantis would be a great build too.

[@emilianoborro5]

Will we see other TIEs like the avenger, defender, striker and so on?

[@Scharnvirk]

Out of these: one surely yes, one maybe, one no.

[@tuckertcs]

I wanna see this guy do an X-wing, falcon, and LAAT/i gunship.

[@x8Ball]

WOW!!!!!!!!!!

[@xydi6581]

Wow

[@monarch8385]

Cool I'm glad you added more members for your team wonder if you're going to let them do reviews and will you do it updated Ninjago collection video

[@phasonawesome9990]

I bought your tie advanced instructions then bought the pieces and I also have the rebels tie advanced and the moc is way more accurate.

[@tomdodd4931]

How much do you think it cost you in total to build this MOC parts and instructions?

[@Cmmdre977]

Can you make a super accurate imperial raider class corvette? That’d be awesome

[@Boldard]

I just bought the 4 ultimate TIE instructions and the build looks very cool, great job Jerak ! Could you make the TIE defender ? It would be amazing dude !

[@Scharnvirk]

It is on the list. Something else is in progress now though, far far more difficult. I'll go for the Defender when I'll need something nice and easy to rest :)

[@axl8603]

seeing this makes me feel so unworthy at moc design, at least at minifig scale... awesome job by Jerac. :)

[@comic-book-enthusiast]

cool video brickvault is awesome

[@sadbrokenegg4053]

lego actually needs to make another tie advanced

[@krymsonkatt2311]

look good

[@tylerferron9019]

I still think you should release that y-wing, x-wing, and a-wing you have there

[@chouse7334]

Tyler Ferron that is a great idea

[@the_one_and_only_gabriel_1501]

You should do more tie fighters like the tie defender or inquisitor tie fighter ectera…

[@hamburgsteak5928]

Jerec should make the Moldy Crow from Dark Forces or the Jade Shadow from the books.

[@RayanL-rg8st]

TIE PHANTOM NEXT PLEAAASSEE !!

[@Scharnvirk]

Eventually™.

[@chasemechanical8297]

I liked the old video style

[@NordicDan]

Do you guys plan to do some of the now non-canon ships? I'd love to see the TIE Defender and Assault Gunboat

[@Scharnvirk]

T/Defender for sure (altough, as usual... Eventually™). Assault Gunboat is low on canonicity and altough it is a cool ship, there are more interesting ones to go for first.

[@sleepingbagmanstudios489]

Even though in the Star Wars universe, the tie fighters generally suck, I am a fan of their looks

[@videogameguy4215]

In legends the TIE defender was the most advanced especially with the missile launchers

[@Chaffee738]

Wow. I mean just wow. I can't even believe this is LEGO.

[@Scharnvirk]

Biggest compliment for me. Big thanks!

[@BrickLifeCrisis]

"Why not T-Rexes..." LOL. This is a fantastic model!

[@ZackhariahM]

I have a few custom Lego star wars creations and I'd like to know how would someone get in contact with your channel to maybe share a design?

[@Jdavidson69]

Could you do a x wing or b wing in minifiger scale?¿?

[@RDCTD]

If you do another moc video like this you should shout it off next to legos versions of the build

[@sugdolomar]

He needs to make both the inquisitors tie advanced v1 and the tie defender.

[@arturarruda8151]

1:49 it looks rather small next to the tie fighters.

[@xxwubtronicxx2488]

Jerec should now make all the first order tie fighters (so far)

[@collisionrifts4718]

Hey mate can u tell me where u got these pieces

[@wargodsix]

Truly a design that LEGO needs to steal that cockpit is perfect just needs LEGO to design a new piece so that those 1/8th sphere pieces have a more octagon opening at the front

[@Scharnvirk]

And internal space. It could be like old more angular piece, with a 2x2 corner brick cut out inside.

[@San-mn2nk]

Why not "tie" rex's?

[@FujiwaraBunta]

Please do a tie bizzaro!

[@jimmyandrews7723]

U need to do a tie defender

[@tomdodd4931]

How much roughly does this custom build cost for parts and instructions?

[@cmathews8247]

Why can't lego make their sets look this good 😭

[@STRU_TV]

Colby M. Because if they did, each set would cost more than 100$

[@barry_crisp]

May I know what song that was in the opening?

[@w.o5977]

When you buy it, do you get all the pieces to build it alongside instructions?

[@ZAD720]

I don’t think so

[@manskool3779]

make a custom minfig scale u wing plz

[@MichaelBricks]

do a marvel superheroes moc in your store

[@EllieMillar-pp7nt]

Will you be doing Ben’s Tie Silencer?

[@reconwarroirthetrue1685]

what is that 3d lego program you guy's use because i can't remember at the moment i need to know

[@Scharnvirk]

For modelling? It is mlcad, but, uh, you need far more than this. Modelling in mlcad only would take AGES.

[@dustinkettwig8970]

How much is this all together and how many peices are in it

[@Worthiestnobody]

song from the opening?

[@sed6]

Just ordered my plans! I was though disappointed to find it'll cost $180-$250 to build according to BL as of today depending if I order new or used parts. That top dish is $18+ dollars alone today.

[@Scharnvirk]

Yeah, inflation is crazy these days. The top dish however, you can substitute with the one from TIE Striker. It is not a perfect one, but works.

[@beanandthat6004]

Do a slave 1 mod i would buy that

[@chouse7334]

Make a mi ifig scale x-wing

[@Comrade_Soarin]

What’s he going to make now?