Filippo Ganna's 3D Printed Hour Record Bike! | Pinarello Bolide F HR3D

  Рет қаралды 96,639

GCN Tech

GCN Tech

Күн бұрын

Пікірлер: 162
@gcntech
@gcntech Жыл бұрын
What do you think of Ganna’s record breaking bike? Let us know in the comments! 👇
@matt_cycling
@matt_cycling Жыл бұрын
Súper Agradable 😄😄
@luke_crip
@luke_crip Жыл бұрын
I like the fact about what they did to the saddle
@truthseeker8483
@truthseeker8483 Жыл бұрын
TOTALLY AWESOME.........LOVE THE AERO
@Flashback_Jack
@Flashback_Jack Жыл бұрын
I want it. That's what I think of it.
@luke_crip
@luke_crip Жыл бұрын
I like how Ollie repeats the fact about the saddle tape twice.
@leftaroundabout
@leftaroundabout Жыл бұрын
It's an editing mistake, the video contains that take twice.
@eloichayer9620
@eloichayer9620 Жыл бұрын
Editing mistake, or result of ingesting too much "purified malted water" too quickly 🙂
@germurphy4986
@germurphy4986 Жыл бұрын
How can a person viewing the video spot this mistake instantly - on first viewing.... Yet GCN can edit the video and put it out without spotting it? Shoddy
@leftaroundabout
@leftaroundabout Жыл бұрын
@@germurphy4986 easy - for somebody seeing the video KZbin, any duplication is an obvious deja-vu. but when you're editing a video, you see _every_ clip multiple times to decide how to best put them together. So at the end when watching the whole thing to check, all of them will be deja-vus and the one that's actually duplicate doesn't stick out. There are worse things than stealing 10 seconds of viewers' time for a duplicate clip. (For example, stealing 10 minutes of viewers' time for a hardly-concealed commercial...) Then again, you don't pay them and don't need to watch their content, do you?
@galenkehler
@galenkehler Жыл бұрын
Anything is possible after a few mineral waters
@Aureas133
@Aureas133 Жыл бұрын
Did you know they modified the saddle. They added a piece of grippy tape stuck on the top to stop him sliding around. Any slight positional changes while you're riding along can have some aerodynamic penalties.
@luke_crip
@luke_crip Жыл бұрын
They even did it twice!
@guest_informant
@guest_informant Жыл бұрын
Did you know they modified the saddle. They added a piece of grippy tape stuck on the top to stop him sliding around. Any slight positional changes while you're riding along can have some aerodynamic penalties.
@dylan-5287
@dylan-5287 Жыл бұрын
That's very interesting. Another little known fact about this bike is how they modified the saddle with grippy tape to stop any sliding around. No one ever mentions this but it's all about those aero gains!
@sueghdsifbvjvn
@sueghdsifbvjvn Жыл бұрын
I think you guys missed talking about the point that they modified the saddle with grippy tape to stop any sliding around which encourages a bunch of core workout by the rider towards the end of the hour record which is ultimately more aero.
@gcntech
@gcntech Жыл бұрын
Good point, but did you know that they modified the saddle? They added a piece of grippy tape stuck on the top to stop him sliding around. Any slight positional changes while you're riding along can have some aerodynamic penalties.
@pauloosterhout
@pauloosterhout Жыл бұрын
I loved how Ollie repeated himself about the tape on the saddle. Not only was Ollie enjoying a few mineral waters when he filmed the segment, apparently he also had a few while he was in the editing booth! Ignoring a couple of hiccups, this was a really good video. I love Ollie's enthusiasm for bicycle tech.
@gcntech
@gcntech Жыл бұрын
Oops!😂
@paulb8587
@paulb8587 Жыл бұрын
Ollie's presentation can best be described as "kid in a toy shop" and it is infectious! When I first saw the size of the chainwheel I thought Ganna had ridden a trike!
@gcntech
@gcntech Жыл бұрын
He is fully in his element here!
@TheEpieikeia
@TheEpieikeia Жыл бұрын
A masterpiece of engineering & design! Thanks for that in-depth review. PS We'd all be like that visitor taking a sneak peek of both Ganna's cutting-edge Pinarello & GCN's coolest nerd!
@did4h2k
@did4h2k Жыл бұрын
been waiting for another gem like "its been redesigned so its a completely new design"
@knarf_on_a_bike
@knarf_on_a_bike Жыл бұрын
That's the coolest bike ever! 🇮🇹
@rhezaandrianta2380
@rhezaandrianta2380 Жыл бұрын
My god, ollie's explanation are SPOT ON!
@bubblesezblonde
@bubblesezblonde Жыл бұрын
4:40 ~ I SWEAR I heard you scream "UNICORN BLACK!" in your head. Good call. I loved that paint job. I've watched this vid repeatedly to admire it. A very good tour of the bike and its features. Thanks Dr. Bridgewood.
@SepehrNaserkhaki
@SepehrNaserkhaki Жыл бұрын
Thumbnail’s non drive side, that’s just a nice
@gcntech
@gcntech Жыл бұрын
What was Ollie thinking when posing for that photo!! 🙈
@Joshuavoice29
@Joshuavoice29 Жыл бұрын
That is a gorgeous bike. I'd love to give it a go.
@quwers
@quwers Жыл бұрын
I think I'm in love with Ollie.
@SteveNinetyski
@SteveNinetyski 6 ай бұрын
God help you
@petinka721
@petinka721 Жыл бұрын
I think Ollie shall go for his own GCN record with a 3D printed bike next time.
@gcntech
@gcntech Жыл бұрын
Ganna is shaking in his boots! 🤣
@SuperTaylor68
@SuperTaylor68 Жыл бұрын
Amazing bike, love the cool F1 like levels of attention to detail ❤
@martinandersson5833
@martinandersson5833 Жыл бұрын
I think that is the coolest bike I’ve ever seen. Thanks for a thorough review Ollie ”one too many beers” Bridgewood 😂👍
@gcntech
@gcntech Жыл бұрын
😂
@KenSmith-bv4si
@KenSmith-bv4si Жыл бұрын
Honestly it's amazing. I would dig seeing how's its made , maybe they have a cross section we could see, maybe a factory tour?
@RenaissanceWW
@RenaissanceWW Жыл бұрын
Ineos' channel has several behind the scenes looks at this bike shot at the manufacturer.
@KenSmith-bv4si
@KenSmith-bv4si Жыл бұрын
@@RenaissanceWW Tankx
@timtsemt
@timtsemt Жыл бұрын
Those are not just Shimano pedals. They come with Favero pedal-based power meter as well.
@Servicevelo
@Servicevelo Жыл бұрын
The narrow bottom bracket isn’t new. The idea was actually Greame Obree’s in the ‘90’s. He needed to build his own axle and bearings. As I recall, the bearings were the parts used from a washing machine. The press picked up in that and reported that the bike was built from old washing machines. Obree was years ahead in terms of his understanding of aerodynamics. A true maverick but one with much cleverness.
@robflel
@robflel Жыл бұрын
Am I losing my mind or did Ollie talk about the saddle exactly the same twice?
@uzairpeters2676
@uzairpeters2676 Жыл бұрын
Yep you are correct.
@robflel
@robflel Жыл бұрын
@@uzairpeters2676 did Ollie have too many mineral waters or the editors?
@shendyhendrawan9254
@shendyhendrawan9254 Жыл бұрын
@@robflel 3 beers kicks well
@friendmeg
@friendmeg Жыл бұрын
Definitely an editing error. But good video nonetheless.
@ethangodridge6833
@ethangodridge6833 Жыл бұрын
It was that beer.😂
@jascollinscork
@jascollinscork Жыл бұрын
Wow important saddle...... soooo good it got mentioned twice 🤪🤪👏🏻👏🏻😂😂
@gcntech
@gcntech Жыл бұрын
Oops! 🤭
@paulj13oz
@paulj13oz Жыл бұрын
Ollie has a few beers and then covers it all again he's so excited!
@TheAesculap
@TheAesculap Жыл бұрын
You live for this. 👍
@savagepro9060
@savagepro9060 Жыл бұрын
I must say, the Pinarello Bolide F HR3D is almost there: missing road transformation with a SRAM eTap groupset installation! Boom!💥💥💥
@rayaddlesee1824
@rayaddlesee1824 Жыл бұрын
I think you had more than one beer 😂 we all have to hydrate we all know about the saddle and bars
@rachelharvey71
@rachelharvey71 Жыл бұрын
Ollie is like a kid at Christmas already 😂😂😂😂😂
@krishnansrinivasan830
@krishnansrinivasan830 Жыл бұрын
Wonderful bike :) Quite a learning :)
@andrewk7560
@andrewk7560 Жыл бұрын
I cant wait to see the GCN documentary about the grippy part on the seat
@gcntech
@gcntech Жыл бұрын
The tape on the saddle? Did you know they added it to stop him sliding around because any slight positional changes when you're riding along can actually have quite big aero penalties?
@alistairdow2326
@alistairdow2326 Жыл бұрын
If you watch the live stream I think the grippy tape of the saddle gave Ganna's undercarridge the Si treatment and wore the lyrca down the the chamois.
@yogatriathlete
@yogatriathlete Жыл бұрын
Finally!!! The first GCN presenter that can correctly pronounce Bolide!
@skyjuiceification
@skyjuiceification Жыл бұрын
I think everyone can agree he's the over powered brainiac at GCN~
@savagepro9060
@savagepro9060 Жыл бұрын
The Oxford English Dictionary (OED) : synonym for 'never ugly' --->> Pinarello!
@martinisbutik
@martinisbutik Жыл бұрын
Take a drink every time Ollie says "Aero"
@julianallen515
@julianallen515 Жыл бұрын
Nice to see young Jeremy Clarkson at the bike show taking a picture of Ollie with the bike at the end.
@savagepro9060
@savagepro9060 Жыл бұрын
A Ribbed Pinarello . . . that's WATTS for pleasure
@heikkisanelma6625
@heikkisanelma6625 Жыл бұрын
its amazing how cadex + speccialized bikes go for wiide ass forks and chainstays then old guards like pinarello go for the thinner is winner concept... i like this old gguard methodology better, aesthetically
@savagepro9060
@savagepro9060 Жыл бұрын
11:31 You know it's a Pinarello . . . when a photo-bomber intrudes a GCN video!
@jamesd5241
@jamesd5241 Жыл бұрын
Ollie lives for this
@gcntech
@gcntech Жыл бұрын
You should have seen his face when we joked we were sending Alex instead! 😂
@daviddarcy7383
@daviddarcy7383 Жыл бұрын
Beautiful bike. Thanks for showing it in such detail.
@mislevis
@mislevis Жыл бұрын
He used Faverro Duo Shi power meter
@BC-wj8fx
@BC-wj8fx Жыл бұрын
Let's focus on a minor editing mistake and ignore that latex & GP's were chosen and successful over every other option available.
@shaori1469
@shaori1469 Жыл бұрын
GCN can i have a request make a video of LOOK KG 496. I really love this bike please
@redbike6340
@redbike6340 Жыл бұрын
Very cool 😎
@craiggruber3024
@craiggruber3024 Жыл бұрын
Ollie seemed so excited, I think the bike was robbed for his pleasure 😂
@LongNguyen-df5xk
@LongNguyen-df5xk 6 ай бұрын
I presume there‘s a continental lab somewhere with prototype tread patterns which are designed to be more aero
@angelfranciscomarinolmedil7070
@angelfranciscomarinolmedil7070 Жыл бұрын
What size is the frame?? Is the usual Pinarello 55 (biggest size for their TT bikes) or since it was especifically made for Ganna’s hour record attempt it is a big bigger??
@Shadowboost
@Shadowboost Жыл бұрын
Those tubercles are not difficult to make in composites. They've been done on lemans prototype car rear wings
@GCNuser123
@GCNuser123 Жыл бұрын
i didn’t say impossible!
@allanboult
@allanboult Жыл бұрын
Ollie, put the beer down, you've started repeating yourself😁
@Afrikakorps68
@Afrikakorps68 Жыл бұрын
64×14!
@NielsDeBoeck
@NielsDeBoeck 6 ай бұрын
INEOS Grenadiers!!!
@philadams9254
@philadams9254 Жыл бұрын
Can't believe you didn't talk about that saddle. Apparently it has grip tape to stop him moving around
@srddrs9285
@srddrs9285 Жыл бұрын
But Ollie did. Weren't you paying any attention?
@gcntech
@gcntech Жыл бұрын
Good spot. They also added some sticky tape to the top of the saddle to stop him sliding around because any slight positional changes when you're riding along can actually have quite big aero penalties! 😉
@RobertHopkinsArt
@RobertHopkinsArt Жыл бұрын
I didn't pick up on "what" material was used to make the 3D frame. Unobtainium? I mean, look at all that cheddar!
@PoulHansenDK
@PoulHansenDK Жыл бұрын
Are the saddle patches commercially available?
@7novalee
@7novalee Жыл бұрын
Okay, now I need to add a sticker next to my “aero” sticker that says 3D Printed on my Gravel bike.
@lukestreet8473
@lukestreet8473 Жыл бұрын
170 mm cranks on the track? How do you not clip the corners?!
@galenkehler
@galenkehler Жыл бұрын
I love this bike, as a concept bike. Don't think they should have allowed it, there's NO way they ever planned on making it commercially available in any real way.
@ethangodridge6833
@ethangodridge6833 Жыл бұрын
A weapon of a bike ridden by a weapon of a rider.
@izmael_kneafcy
@izmael_kneafcy 6 ай бұрын
Ollie grabs a beer and starts repeating himself. 😅
@jordyd8916
@jordyd8916 Жыл бұрын
Common Ollie, we are all thinking it... Do another hour record... . I dare you, I double dare you.😁
@skyjuiceification
@skyjuiceification Жыл бұрын
Come on u mean?
@gcntech
@gcntech Жыл бұрын
👀
@boriss.861
@boriss.861 Жыл бұрын
Ollie Corrugations on the Downtube not nodules. ( See. Corrugated cardboard and corrugated roofing sheets.)
@chrishebert5672
@chrishebert5672 Жыл бұрын
I would be concerned about the structural integrity of a 3D printed bike vs. other frame materials. Seems like the material would be more brittle and not as strong as other materials. Maybe okay for an hour record, but how about on the road for 5 years?
@81caasi
@81caasi Жыл бұрын
Ollie mentioned its in fact over engineered...
@chiuchoangbui6746
@chiuchoangbui6746 Жыл бұрын
Who's the editor lol :)))))
@bernadinism
@bernadinism Жыл бұрын
Tubercules make you faster! If I had tuberculosis would I be fast as well?
@savagepro9060
@savagepro9060 Жыл бұрын
Yep, you would so fast you won't even shift
@kraatshenk7665
@kraatshenk7665 Жыл бұрын
? What is his saddle tilt?
@leonbroekx
@leonbroekx Жыл бұрын
Where can I download the CAD file?
@per_young
@per_young Жыл бұрын
Any idea what the weight is for the complete bike?
@julianallen515
@julianallen515 Жыл бұрын
He did say at the start, it's 9 kgs something.
@gcntech
@gcntech Жыл бұрын
9.3kg
@Saladh_Olivier
@Saladh_Olivier Жыл бұрын
Would love to learn why the down tube doesn’t have what’s on the seat tube…
@wcubbin
@wcubbin Жыл бұрын
*Sees Ganna's aero chainset. *Thinks "Can I find some sort of shrink-wrap plastic hack/bodge to get my 105 more aero?" 🤔
@pierrex3226
@pierrex3226 Жыл бұрын
I have a 3d printer. Pretty sure i can print that humpback shape in strips and stick it on any seat tube. Using flexible filament. The CAD design of a wavy thing is one of the simplest things to design. Anybody interested? Would probably look kind of ugly, is the only thing... And not be particularly durable. But cheap as hell.
@nehcninakred
@nehcninakred Жыл бұрын
Should have brought a caliper to measure the tires xD
@kentan8536
@kentan8536 Жыл бұрын
I want to know what Hambini says about it first, then Ill believe. Now its like giving candy to a kid, of cos they love it.
@JonCannings
@JonCannings Жыл бұрын
I love the limits that technology has gone to. I don't think it is a beautiful bike though. That is reserved for the Lotus 108.
@gcntech
@gcntech Жыл бұрын
If you love the Lotus 108, you'll have to watch our 'Quantum Leap' documentary on GCN+. It's presented by some guy you might recognise!! 😉😂 👉 app.globalcyclingnetwork.com/UJ4ecV92k5SbSBZe6
@jefflarson4221
@jefflarson4221 Жыл бұрын
STELLAR REVIEW OB 🇺🇲
@Liedaho
@Liedaho Жыл бұрын
What's the real hour record ? The one that's not held back by uci rules?
@truthseeker8483
@truthseeker8483 Жыл бұрын
YES! CLINCHERS WITH TUBES.....THE BEST FOR LOW ROLLING RESISTANCE 🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂
@savagepro9060
@savagepro9060 Жыл бұрын
nope! tubulars with latex tubes
@FooFahFoeFum
@FooFahFoeFum Жыл бұрын
There are no advantages for the small gaps at the front fork. Why not design the same pattern on the fork as they did on the seat tube?
@demand61
@demand61 Жыл бұрын
Ollie getting f€cked over by the editor by letting him go on about Ganna’s seat 😂
@gcntech
@gcntech Жыл бұрын
🤭
@jfloyo11
@jfloyo11 Жыл бұрын
What is that a Huffy
@DamnitsAdriel
@DamnitsAdriel Жыл бұрын
Who got to turn back to watch Hambini's video?
@neilmdon
@neilmdon Жыл бұрын
What is the GCN mineral water budget?!
@gcntech
@gcntech Жыл бұрын
Not much left to be honest after Dan's spend! 🤣
@haydengutiw
@haydengutiw Жыл бұрын
They put grip tape on the saddle so he doesn’t move around in his position.
@PoulHansenDK
@PoulHansenDK Жыл бұрын
Wouldn't production bikes with trickled down technology still be too heavy when printed in any alloy compared to carefully laid up carbon bikes with the best fibers? You still can't print carbon. Customisation could maybe be done by 3D printing the customised moulds for carbon layout.
@TheUsername1302
@TheUsername1302 Жыл бұрын
So Ganna had only one gear…which is bigger than my biggest gear
@barriem5318
@barriem5318 Жыл бұрын
It's a mistake to allow such a massive R&D budget into the hour record. Now it's about $$$ as much as the rider. Now Ganna's amazing feat is not comparable to past record accomplishments. I loved Boardman's hr record when he only surpassed Merckx's Mexico 74 mark by 11m. That's what made it special. Now we're spending more time ogling the tech instead of appreciating the rider and their accomplishment. Bring back the hour record on a traditional bike!
@inspektormoors
@inspektormoors Жыл бұрын
Did he really said 'bike and subscribe'?
@jirkaoja267
@jirkaoja267 Жыл бұрын
Ganna didn't use shimano pedals, he used assioma power meter pedals during his the record breaking ride. They probably swapped the pedals cose ineos isn't sponsored by assioma. @GCN tech
@cnjlakes
@cnjlakes Жыл бұрын
Derby??? Should be labelled Mercian!
@aacc8466
@aacc8466 Жыл бұрын
Ribbed for the hour record
@SimoneChiaretta
@SimoneChiaretta Жыл бұрын
Sorry, but after all these years of using Pinarello none has ever corrected the pronunciation of Bolide? In Italian it is pronounced with accent on the O, like bOlide, not bolIde
@ianhuckle8101
@ianhuckle8101 Жыл бұрын
Quite amazing the tech involved. It's so far advanced from the Merckx bike it's ridiculous. It's like a spaceship. Just goes to show how f@ing hideous the UCI were to Obree. They tried to screw him at every available opportunity. Pulling out all the stops to stop him .
@teabelly1565
@teabelly1565 Жыл бұрын
I certainly agree!
@hubby17ification
@hubby17ification Жыл бұрын
The new UCI rules coming in on the 1 Jan now call them 'forearm supports'.
@ГригорийГусев-м5м
@ГригорийГусев-м5м Жыл бұрын
Серж приди видос от GCN переведи!
@TengoHambre
@TengoHambre Жыл бұрын
I see a lot of 50 year old buisnessmen over here riding 15 k. Aero bikes, and the riders built like whales🐳😅🤪, maybe for aero gains?🙂 ( not judging someone for expensive bikes, also got myself a hard earned 5 k bike also😅)
@colinfisher2463
@colinfisher2463 Жыл бұрын
Ollie just go get a hotel room and get it over with 😋
@outsidestuff5283
@outsidestuff5283 Жыл бұрын
Mmm ribbed bike for our pleasure
@CatManDoSocial
@CatManDoSocial Жыл бұрын
Maybe I'm loosing it but didn't the UCI ban that bike after Ganna set the record? I know I heard/read that somewhere.
@steverhysjenks
@steverhysjenks Жыл бұрын
I think one of the missing points you didn't cover is the internal structures you can't see that 3D printing enables.
@edsalt5281
@edsalt5281 Жыл бұрын
Give it to hambini and we will see how good it really is 😂
@anthonyf2919
@anthonyf2919 Жыл бұрын
𝐩𝓻Ỗ𝓂Ø𝓈M
@graemebrown9243
@graemebrown9243 Жыл бұрын
Someone seems totally buzzing about this...
@GravelRacer1
@GravelRacer1 Жыл бұрын
My take from this bike....UCI is stupid
Top 9 Track Cycling Innovations | From Barcelona to Tokyo
19:11
Breaking the Hour: Filippo Ganna
23:34
INEOS Grenadiers
Рет қаралды 280 М.
У вас там какие таланты ?😂
00:19
Карина Хафизова
Рет қаралды 10 МЛН
龟兔赛跑:好可爱的小乌龟#short #angel #clown
01:00
Super Beauty team
Рет қаралды 88 МЛН
I 3D Printed and Tested Your MTB Gadgets
14:05
Berm Peak Express
Рет қаралды 412 М.
We Found The World’s Lightest Hill Climb Bikes!
12:53
GCN Tech
Рет қаралды 57 М.
DREAM BUILD ROAD BIKE - Pinarello Bolide F
16:24
Gee Milner
Рет қаралды 205 М.
My Hour Record Bikes - The *Not So Big* Differences
14:19
Alex Dowsett
Рет қаралды 14 М.
One Hour: Filippo Ganna by Pinarello
9:19
INEOS Grenadiers
Рет қаралды 217 М.
How I FINALLY Rode An 18-Minute 10-Mile TT (52km/h Average)!
23:44
Kristian Blummenfelt Talks About His Kona Disaster
8:59
Global Triathlon Network
Рет қаралды 118 М.
5 Upgrades Worth Spending Money On | GCN Tech Show Ep.356
26:52
Cycling 950km In 24 Hours? | World Record Attempt
20:48
Global Cycling Network
Рет қаралды 3,4 МЛН
Home-Made Custom Carbon Bike Tech With Olympian Rob Hayles
21:23
KHAMZAT CHIMAEV V ABDU_ROZIK DANA UAYT ♥
0:20
Dinoo_muz
Рет қаралды 1,4 МЛН
Бокс - Финты Дмитрия Бивола
0:31
Антон Чередниченко - Anton Cherednichenko
Рет қаралды 554 М.
Epic Kids Moments
0:28
FootRush
Рет қаралды 13 МЛН
💔Disrespect to Respect ❤️
0:25
LA15I
Рет қаралды 4,4 МЛН
😱РОНАЛДУ И МЕССИ В ДЕРЕВНЕ
0:20
Football M9Studio
Рет қаралды 410 М.