Filler For Powder Coating?!? Yes! Parking Meter Restoration

[@JimRosa-d3g]

Do you have to heat set the Tiger Epo Strong before sanding or can you let it cure for a few days and sand before heat setting it?

[@CrosslincBiz]

You can either let it cure ambiently (it will full cure with no heat in 2-3 days) or you can force cure it in about 20 minutes. Only after it's cured can you sand.

[@wmlbiker1]

nice! I am wondering how that might work on rim curb rash

[@CrosslincBiz]

If the rash is shallow enough to just blend out with a sander, that would be the best method. If the rash is deep enough that you need to add back in material, I would not recommend this filler. It's not rated to fill in very deep areas and would most likely chip out over time.

[@wmlbiker1]

Thanks for the info!

[@ledfootlou2540]

How do you get the top coat to stick to the primer since there isn’t an electrical charge?

[@CrosslincBiz]

It's all about the gun settings. You keep the kV's down, and the powder just lays down on top of the primer.

[@kennethhatch1758]

What's the name of the filler

[@CrosslincBiz]

This is Tiger Drylac's Epo Strong

[@jonnieseely5541]

@@CrosslincBiz 7:04