F63B1 Softener Valve Head

[@malcnicklin6242]

Thank you so very much our installer left us nothing no manual or instructions how it works and what to look for .

[@pats893]

Tutorial yg amat jelas dan bermanfaat ,trima kasih ...

[@ak29491]

Thanks for very helpful and informative video

[@FilterShopZa]

Glad it was helpful!

[@arrianpascual8346]

Hi. Thank you for the video, it is really helpful. but I only have 1 question, If I have a water refilling station and atleast 70-100 containers a day. How many days does it need for the backwash/regeneration? as of now I set it to 5 days. But not sure if it is correct

[@semiusefulinformation144]

It will completely depend on your water quality and what the rest of your system is.

[@arrianpascual8346]

@@semiusefulinformation144 Thank you for your reply, I have dual membrane and I'm producing purified water. I also have these 3 levels of filtering, Water Softener, Carbon Media Filter, and Multi Media Filter. its a 24 stages water system

[@0837739644]

I'm using this head with tennin removal resin. Is the any way I can set the head to regenerate more than once a day? Tnx Yasin Cape Town Siuth Africa

[@vikasbrahmavar122]

Hi...Thanks for the video...very useful..Can we do the setting for regeneration once in say 3000 Lts instead of number days...

[@edgarchristiancabilan3635]

If the day of the backwash is 00 does it still do the backwash process?

[@منالحياةاليمنية]

Thank you, can i do the backwash manul as i need in any time?

[@jamir1915]

What was the causing the purified water become salty after backwash.

[@chriscars3578]

Thanks for the video great 👍👍👍👍

[@johancj4810]

Good day I got F71Q1. How must I program iron removal. If you can help please

[@FilterShopZa]

Hi, what media are you using?

[@WilliamGrabCar]

i have a problem about setting the softener automatic valve for supply boiler water cap 1 ton/hour could u suggest the best cycle for regeneration,backwash until rinse

[@FilterShopZa]

Hi, the amount of time for each cycle will depend on your water quality. A good start is to run it till you find that your still getting some hardness after the softener and then set a interval that is about 30% shorter than it took to get to that point.

[@Amazingdecora]

Is this timer type or meter type?

[@MarkAnthonyRushe]

Ive noticed since our power went that our salt isnt getting used and lime is coming in. All my settings are set as the video but when i try to firce a regeneration nothing happens

[@FilterShopZa]

That doesn't sound right, is the valve head giving any errors? Also check if the valve in the brine tank isn't stuck in a closed position.

[@narsshop4981]

Is day 7= Sunday?

[@rajpalmesh]

hows the performance of this valve ?

[@deniceomondi5489]

Hi my regeneration lamp keeps on flushing but when I tried forced regeneration it's not going thru what could be the problem same modelF63B1

[@jepprhona1903]

Hi boss. How do we fix -E1- error with continuous beep? Thank you.

[@ed-liem]

What are the factory standard minutes for each stage assuming normal operation

[@FilterShopZa]

Hi, I think Backwash is 30min, regen 45min, brine refill 15min, Fast rinse is 10min. You would however want to set them to your specific situation.

[@paweostanski4167]

Hi,I finnaly know how to set it.Tho what do the green stripes indicate, and those it matter if they are green and red?,thx

[@FilterShopZa]

The stripes moving is just an indication that it is in operation, as such a different colour might just be model dependent. Glad the video could help you with the setup.

[@lajjapatel3128]

My valve has stopped showing change in the water level while in operation. Why so?

[@sandygrant-taylor8819]

If i have a tank for filtering and a second tank for the cationic resin, can i set the the regen and refill to 0 minutes?

[@FilterShopZa]

If you set it to zero minutes then your never going to regenerate the resin and it will get depleted very quickly.

[@sandygrant-taylor8819]

@@FilterShopZa This is only the the tank that I'm using for filtering, not softening. It's it ok for that. I get a small amount of water coming out the brine port.

[@FilterShopZa]

@@sandygrant-taylor8819 Hi, That sounds like the valve head isn't sealing properly internally. If you never use the brine refill or regeneration modes you should be able to seal it off to prevent the water leaking, if it is connected to a brine tank there is normally a float valve at the other end.

[@MaGrasya27]

In case there's a power interruption for a long time, will it default the program?

[@semiusefulinformation144]

It normally keeps its program for about a day of no power.

[@diosdadoc.espiritujr.2844]

Our F26b1 do not proceed to normal operation screen, it just continuously display the start up screen where all part of the screen is lit and after which showing the model then cycles from then on. Is my F26b1 needs to be replace? or is there a way to reset the entire program? thank you for your reply

[@semiusefulinformation144]

Hi, Check for an agent in your country, they should be able to check it for you. You are normally able to replace just the damaged component and then don't need to replace the whole valve.

[@krisztiangyorgymolnar7355]

Hi! Isn't the regeneration time short? 60 minutes is a lot, but the set 1 is not enough. There is no time to absorb the correct amount of salt water from the tank. I don't want to tease, I just want to help. Have a nice day everyone.

[@FilterShopZa]

Hi, you would want to it just to run long enough to empty the brine tank. The time will vary depending on the pressure in your line and the size of your brine tank.

[@krisztiangyorgymolnar7355]

@@FilterShopZa Thank You for your answer.

[@coldwind70]

If power is OFF to the controller while in SERVICE mode, will it maintain at SERVICE mode valve opening?

[@damienfynn1522]

LW Ling , yes it will stay in service mode if the power is off.

[@KoraputiaHasahasi]

How can i set Automatic Regeneration on this?

[@glennmataragnon1409]

What does the brine refill time means?

[@FilterShopZa]

It is for refilling the brine tank where you would add salt.

[@chrissiwu7616]

I had -e2- in my monitor? Can i fix it?

[@changemakers622]

What is E-3 in mpv

[@linehougaard1397]

I can’t go into the A-01 option and brother the H options. And I can’t put on the hardness of the water? What to do?

[@loriusseanafack401]

Please for the manual guide ( pdf or link)

[@FilterShopZa]

There is a nice description here: filtershop.co.za/en/pg-purifier-of-water

[@tayoa1368]

How to clean manual?

[@charlottedayto2276]

Hello how to fix E4

[@wsstczambo8577]

how to reset it.....?

[@darrenryall1995]

You can Reset it to factory settings, by disconnecting it from power for more than three days. Not sure if you can reset it manually.

[@KidanuDagnew]

kid