UPDATE TIMES WILL DEPEND ALL ON THE UPDATE SIZE NATURALLY. ASIDE FROM THE TIMEOUT ERROR THIS WAS A VERY SIMPLY PROCESS.
Пікірлер: 40
@tommysainthill5775 жыл бұрын
The Fimi has a lot of bells and whistles, the truth is in the flying.👍 This a very interesting quad, no doubt. 👍
@dronedays4503 жыл бұрын
as usual great video Chris, bought a new 2019 model of eBay cheap £225 yesterday fired it up and it said no updates but today it said there was lol, I did not have a clue how to do it so thank you for the info
@QCGUY3 жыл бұрын
Glad to help!
@Wavelength7mhz15 жыл бұрын
Hi Chris !!! I'm looking forward to more Fimi X8 se videos !!! It's been awhile 🙂😎!!!
@PTraas5 жыл бұрын
Yep looking forward to that
@GorillamansGarage5 жыл бұрын
It took mine about 20 minutes total. It was on Android. I thought it was finished at one point and I just left it and it rebooted. When I went back into the App it said to update the ESC.. I did that (all files were already downloaded, its the updating that takes time). Then I went back into the App and it said another update... this time it was Camera. I did that. Then I exited the App and re-entered to be sure there were no more updates. At the end, that is when I got the "System is preparing" message. I am hopeful that with calibrations the message goes away. I see another guy on KZbin has the same error message and he can not unlock his motors. Another great turtorial. Hope it fixed the IOS camera settings. Only thing here vs Zino... you can not revert back to an earlier version. I guess thats the price for automation.
@QCGUY5 жыл бұрын
From what I see looking back the controller goes into a sleep mode if not touched for a short period of time. If that's the case it explains why mine shut off and had the time out error during the update. I have not had the other problems you are talking about but hope you resolve them and can help the other guy perhaps. Thanks
@TheGOLDIdeluxe5 жыл бұрын
I have the exact same problem now with that "System is preparing" message. How did you fix it?
@xKevmachinex22 күн бұрын
did they kill support for the 2020 fimi x8 se? the app runs on my android I got picture from my drone camera but nothing else works the lights are red on the remote for bad connection, I go into firmware and my RC firmware is 1019 and my RC relay firmware is 1019C but theres no updates except for a no fly zone thing but when I click update it just says something about no camera, which my camera firmware shows as N/A
@DisHappah3 жыл бұрын
i see youre using the old app and not the new one. is this the Fimi x8 or the Fimi x8 2020?
@QCGUY3 жыл бұрын
Dis Happah The video was over a year ago. Original X8 👍
@jeanbindels20095 жыл бұрын
very helpful video think it is also possible to bring the Fimi on PC on the latest state hope you show that sometimes , I am already looking forward to the next video
@QCGUY5 жыл бұрын
Jean Bindels Hey buddy! Thanks and I will do whatever I can when time allows. 👍
@jeanbindels20095 жыл бұрын
@@QCGUY So what I've seen so far from Fimi is verry good , a few small bugs that are easy to fix , I think, he could well be a very good choice against DJI's overpriced products at a very good quality level , and I suspected the quiet that I will soon also be the owner of one , Haha
@QCGUY5 жыл бұрын
Jean Bindels Yes there are some bugs and the typical differences between devices with things working on one and not the others. This state of functionality is where Hubsan should have released the ZINO. Funny how so many are still so excepting of the ZINO flight control flaws and it’s all due to the fact that they worked out camera issues and as long as people can create nice videos then the blinders will remain in place and hubsan will act like the rest is no big deal. These are simple flight control fixes. Why so long and no change what so ever? That’s the question people need to ask and be concerned about. I really want to see one good update once they return from this Chinese New Year holiday.
@Greg_Pittman5 жыл бұрын
Great video, when will you be doing the next weekly update video?
@QCGUY5 жыл бұрын
Greg Pittman Once they return from Holiday and hopefully produce something for us to discuss. A step forward I hope 🤞
@HerbertFPVBrasil5 жыл бұрын
this little dude has his brother issues? battery fail and stuff?
@stuartsmith11353 жыл бұрын
The rc wont connect to the drone when the softwere is update just keeps saying please vonnect the drone but its conntected becuase i get it to start flying so im confused to why it isnt allowing me to do so.
@QCGUY3 жыл бұрын
A conversation to be had in my group...Thanks facebook.com/groups/HubsanQC
@LisaBlank-pb7zf3 жыл бұрын
QC Guy, was wondering if you had any suggestions why I am getting barometer error on the Fimi X8 SE 2020 Drone. I took out the app and reinstalled it and did all the calibrations on the Drone and STILL can't get rid of this error. Do u have any ideas how to correct this? And where is the wire to fix this? Is there a way u can send me a photo of where about it is. I am so stumbled on getting this solved and there is nothing on KZbin on this problem with the Fimi. I hope you have some answers for me.
@QCGUY3 жыл бұрын
I’m sorry I don’t have anything to show you at the moment or a easy answer. I would make more how to videos on FIMI problems like this but I get sick of all the comments and questions about this month make and model being different from another month make and model and the other conspiracy rumors flooding this drone. I fix a ton of drones and FIMI is among the popular ones I fix. I would say you have a calibration issue or problem with your barometer and to contact FIMI support with pics and video proof. Sorry I couldn’t be of more help. I wish I could publish all the repairs I have done with this model but the comments alone would have my head spinning.
@ronaldstigall3120 Жыл бұрын
I am have trouble with my FIMI 2020. When I attempt to turn on both the controller and the drone they light up indicating full barge on both but with 5-7 se o new they shut off. Does a yo e know what my trouble could be
@QCGUY Жыл бұрын
What does it do when you start the motors and hover? I think if you just run it idle or powered on they shut off.
@AngryPepper19643 жыл бұрын
QC guy, when I open the FIMI app it opens directly to the “Enter Device” page. Does that mean there is no update at this time? Thanks.
@QCGUY3 жыл бұрын
Correct it will tell you there when/if there is an update.
@AngryPepper19643 жыл бұрын
@@QCGUY ok great, thanks much.
@foxhammer24612 жыл бұрын
So lm new with my fimi se x8 2020 and I crashed it and had to replace the gimbal and camera. However now I can't get it to calibrate dose anybody know what I am supposed to do at this point. I would appreciate any help. Thanks
@QCGUY2 жыл бұрын
Did you perform the six axis calibration for the quad and then the one for the gimbal? IMU calibration?
@fgary30095 жыл бұрын
Does this update feature work for Android phones? Can you tell me? Thank you.
@QCGUY5 жыл бұрын
F GARY Yes both types of devices. If it’s a long update and times out just close/shutdown and restart the process. It will pick up where it left off.
@weddingartedgebangladesh49594 жыл бұрын
hlw, i have a fimi x8 se. i face a some problem "Gimbal not dectecd' how to solved it ?
@QCGUY4 жыл бұрын
Check the cable....
@OzetaKHOS20304 жыл бұрын
i have a problem i wanna update but the drone tell me a12 is not connected
@QCGUY4 жыл бұрын
Ozeta KHOS Join my group and post it there. Great group of helpful people with knowledge. facebook.com/groups/HubsanQC/?ref=share
@mehmetefe32735 жыл бұрын
I bought this product. When the control battery ran out, I tried to charge it. The remote control cannot see the phone and the plane. The control power indicator flashes red. What should I do? Is control format required, how do I do it? Thank you for your help.
@QCGUY5 жыл бұрын
mehmet efe I don’t understand why you replaced the controller battery. They last a long time and recharge so it’s odd that you had to replace it but it sounds like you may have done damage in the process. You may need to update the controller firmware in which you will need to contact them for help there. Thanks
@mehmetefe32735 жыл бұрын
QC GUY kumanda bağlantı yapmıyor.
@QCGUY5 жыл бұрын
mehmet efe ????
@mehmetefe32735 жыл бұрын
QC GUY faulty control arm connection. can't see phone and drone