Final Mullet Power! Back stage look at Mullet Dyno

Watch Mullet make the most power yet on the dyno from a backstage view! More tech!

[@Guysm1l3y]

CRITICAL ERROR on this dyno session: nobody petted the Dyno Marlin.

[@shawnbaker3245]

Holy crap you're right. I can't believe i didn't catch that. Lol. Good eye sir.

[@TheRoulette77]

hopefully somebody took that dang fan belt of his spear

[@This_Time_Next_Year_Rodney]

Good shout…….. that would explain the wheelie at the track then

[@tonywhite7753]

No need for good luck charms when steve morris is in the building

[@schwags1969]

You are correct, good point. Wonder if the ol' Cleeter noticed that??

[@Blain5700]

I love how everyones excited at the HP's and Steve's like, Uhh.... yeah.

[@RadDadisRad]

Exactly. How many rips did Steve make on Tom Baileys motor and car? That thing was singing a song.

[@markball7028]

It’s just another day at the office for him.

[@rangerst_870]

Someone said something last video about not knowing what Sam was looking at in the engine bay and under the car. He is watching carefully for anything leaking while others are enjoying the moment. He is a VERY VERY smart man. Catch a tiny leak early to avoid a catastrophic leak next run or two. It’s smart thinking.

[@aerosaaber]

in cleeter's video he did exactly that, iirc it was the co2 line for the waste gate

[@aerosaaber]

he also knows a thing or two cuz he's seen a thing or two lol

[@Stephenc4877]

Finally Steve your engines going to get the publicity they deserve. From an engineering standpoint I can’t think of a more well thought about engine from what I’ve seen so far.

[@zethloveless7238]

He didn’t engineer this engine it’s a brodix block and heads etc he just puts it together.

[@donaldhalls2189]

@@zethloveless7238 so what sort of engine have you built that do more than 2019hp ? all the best to you all

[@zethloveless7238]

@@donaldhalls2189 how’s that have anything to do with what I said ? How does my engine building background change anything I just said ? He didn’t engineer this it’s already made by brodix. He did a damn fine job of assembling and tuning it tho 🤔

[@donaldhalls2189]

@@zethloveless7238 so do you pull it out of the box and bolt it together or do you have to re-enginer (re-size) the ring's, or lap in the valves, size the crank etc

[@zethloveless7238]

@@donaldhalls2189 if you think gapping rings is engineering then I’m an engineer myself 😁

[@therealcraigsutton2740]

Love how Mr Sam is in everyone's channel polishing & looking for leaks!! 💯🇺🇸🤘

[@brianl8983]

He’s everywhere and does some quality work

[@therealcraigsutton2740]

@@brianl8983 Facts 💯🇺🇸🤘

[@MrJob91]

The appreciation for the cleetus crew is heart touching. If they'll watch this video they will understand your appreciation for them just that much more. It must mean the world to them.

[@despizedicon]

It was only a matter of time before this happened. I could almost see it when Garrett drove Tom's car a while back. How effortless it was to get a 6 second pass. Oh not to mention the first drag week car to get in the 5's...and win. Wonder how long until Garrett is hitting those numbers. Great stuff.

[@MrYankees06]

He drove 1.0 that day. 2.0 is the 5 second beast.

[@dustinhicks5789]

He won’t that’s a totally different engine

[@shifty1927]

I think the 5s are more billet big block territory. I could be wrong though.

[@ricknielson8934]

Tom runs an SMX engine

[@MillionairX]

he will need a whole new car and engine to do that. 6 seconds to 5 seconds is about 2000hp difference and 1000lbs lighter. lol

[@tripprogers4814]

10000 sub in 2 days puts Steve over 100k.. just by being the most “Hold my beer” kinda guy ever! Congratulations

[@todddooley793]

Power makes people happier lol. Great job Steve, this entire mini series was fantastic to us track guys!

[@michaelsclark]

Mo powaa babbby!

[@patcoder7308]

Love how you don't slam the door everyone should be careful with other's things

[@warrenmichael918]

They all can see that it still needs lined up to fit better so they are being easy on it.

[@fucksusanwojcicki]

@@warrenmichael918 LMFAO what are you talking about. They are already aligned and final installed. They aren't slamming them because you don't slam composite doors no matter how perfectly they are lined up, because you can crack them by doing so

[@warrenmichael918]

@@fucksusanwojcicki The last video there was a big gap still at the bottom of the drivers door and Zack had the other door off working on it next to the dyno, they are still opening the door for Steve from the outside here in this video because they arent "final installed" like youre laughing so hard about for some reason. I wasnt saying they are gonna start slamming these new doors once they are finally finished, we all know carbon doors take much more care when being shut but the guys are being extra careful right now since they will still need some adjustment, that and they are still getting used to them being so much lighter than the old ones.

[@durango4624]

Hey Steve this way of filming is gold i think, honest real footage ,just set up 2 more cameras different angles it can be done anywhere workshop drags dyno room you capture the moment its fantastic ...Cheers

[@Matty.Hill_87]

Mullet: makes 1940hp Steve: and I took that personally 😂

[@bigdawgs94]

Mr. Sam is the best, y’all gotta fund a car for him!

[@Axial32]

Cleetus is helping fund a vehicle for sam by selling sams spray wax. All proceeds go to Sam's build. It is either in a cleetus video or dr tune em all video.

[@allenlord3679]

It's all in the works behind the scenes. Trust and believe the way stuff happened with ED cleetus and crew has Sam taken care of. Parker is always promoting Mr Sam too. Awsome group of people.

[@veto8792]

Sam took the Mercury Marauder on drag week.

[@Genwonspeed3]

I think he has something hidden at home.

[@Axial32]

@@Genwonspeed3 yeah it's in a video with James and Sam.

[@zerocontent3171]

Cleeter's got himself a pretty good crew there they all seem to work well together.

[@given0fox968]

Hoping to see many more Steve Tech tips in this video like the first one 👍👊🇺🇸🤘

[@asylumental]

I subscribed to your channel about 1-2 days before cleetus picked you up for tuning mullet.. You're channel has grown by 13,000 already in a matter of days haha, cleetus has some of the most loyal fans. In all seriousness, you deserve all the extra exposure and whatever extra income stream you get from this channel. Youre one of the best engine builders out there, and I can't wait to checkout your Playlist of tech tips.

[@stevenagel6096]

I'm one of those new subscribers

[@izzyplusplusplus1004]

New sub here!

[@MJTAUTOMOTIVE]

Cleetus does have some ok content. But some of His 'fans" can be very rude and think no matter what happens they are always right. Some of his fans think that the some of the crowd numbers at events like Race week are only there because Cleetus is Racing. I used to watch the Live feed of Race week with the comments turned on. But the Last couple of years since Cleetus has been racing, I haved to turn the live comments off because of all the toxic fans on there that think that Cleetus is the one that came up of the idea of drag racing. and when He has the Events with the Crown Vics some of the comments always say that He has bought back oval track Racing. and the popularity in Motorsports. Don't get Me wrong. It is great to have new eyeballs watching Motorsport, But damn some of His Followers can be very Toxic.

[@northtexasskies7786]

@@MJTAUTOMOTIVE It's exactly like all the Adam LZ "fans" in Formula Drift.

[@garrettlawson9413]

@@MJTAUTOMOTIVE welcome to the internet.

[@josteincarlsen2905]

Engine builder that is also a tuner is so perfect 👍🏼

[@joeanderson444]

I think Zack is definitely a good person to have around. He seems so hungry to learn something new every second of the day!

[@cross_fire_]

Very cool, you are so calm doing this and you definitely can tell you don’t overthink most issues. Great qualities to have as a person.

[@minibikemadman]

Love ya steve..so cool calm and collected...he knows what it takes to get it done and win races.

[@eadelfin]

Steve's dyno graphs are a work of art that Pablo Picaso would be proud of.

[@Hun6SoLow]

Thank you so much for this POV, Mr. Morris! So sick!

[@compustat]

Great job as usual Steve. I love watching your clips, learned a lot from you and your son.

[@leeuhack]

Good lookin out Steve. Thanks for all that you are doing.

[@andrewschwerdtfeger5165]

Been watching your videos for years Steve. I don't know how I wasn't subscribed already but definitely hit that button for this Cleetus build. Such a great collaboration, hope you guy do more in the future.

[@jacobsparks4419]

Congrats on another steller engine Steve, you are like an Engine Magician!!!!

[@BlueEternities]

Thank you for your efforts good sir! Monster of a motor you've put together there.

[@joshuasmiley583]

Steve great work on the motor and the tune.

[@hyd119]

Steve I just have to say that it's an honor watching how you tick. I enjoy how you were kind to their equipment by shutting the door with lots of care. It's appreciated when you share your knowledge as well or tell the audience what to listen for. Craftsmen that have so long in their trade can just casually drop knowledge bombs in passing conversation even, that would take someone years to learn.

[@christopherbarrett8710]

The information on hub dyno vs chasis dyno was great information, your the man Steve!

[@jimsoderbom5884]

Awesome job guys! Steve, you are the man..

[@MrRee-kn4xd]

I'm really glad I found this channel. Your Steve Tech videos are great too.

[@chrismartin6544]

You are the guy Steve when it comes to engines bar none 💪💪💪👍

[@Living_EDventures]

Fantastic job Steve!

[@CARRIERGUY]

Man that thing sounds so sick!

[@shadyonej]

Zack & ty 🙏 are the real heroes!!

[@Tylerdoesit]

This group is the literall definition of synergy. The total greatness of this group is better than everyone's Individual greatness all added up. Something magical happens and they truely all make each other better!

[@MillionairX]

I enjoy your videos simply because its not a chop n cut special like most. let the camera run and let us watch the action in real time. Thanks man, and thanks for all the tech vids! Everytime i click your channel, i learn something new.

[@SuperJAY308]

Love your work Steve. The best in the business

[@acurarl9929]

Super amazing dyno session

[@TheCuttz1984]

Seriously can't get enough of this content. True engine builder will see it through to the end. Love your work mate. Much love from Australia

[@tjeffjenkins6226]

NICE! Thanks Steve for keeping it real.

[@wheeln24-79]

Cleetue seemed proud of the guys and the end bragging about the 2 week swap. They're a fun team to follow!

[@jaypop7385]

Bravo steve another well built monster SM engine!!!!! Can’t wait to see what mullet will do now with this amazing motor and turbo setup at track!!!!

[@lorenmorelli9249]

This is the result of having the Best In The Business working with you.. Very cool to watch the progression. All the way around!!

[@bullfrog1807]

This engine is definitely going to make Mullet a serious threat to anyone going against it….seen a video of Mullet at the track and WOW Mullet pulled a massive wheel stand what looked like the 60ft!!! INSANE POWER 🇺🇸🤘🏽

[@Mac-td7lt]

Yep. He might kick that guy Rick's ass that drives the green big block Mazda. He's the grumpy dude that won the Christmas 🎄 race at Bradenton.

[@josua8448]

Love the shout out to sam and zac. Good guys. And always working hard.

[@bennyboom63]

You sir have put your time in for sure. You have the dream job and deserve every bit of it. You make some of thee baddest engines on the planet and manage to stay humble while doing it. Good luck to you and God Bless

[@civichbc]

Steve is such a humble dude and that’s what I love about him! And full of knowledge.

[@vehdynam]

Thanks Steve ; great video. Really looking forward to track times. Many thanks.

[@matthewgoins2459]

AWESOME JOB STEVE!!!!

[@jerrycraig6522]

SO effortless!!!

[@alexandergames7843]

The collab I've always wanted!

[@WTnetworks]

Great Job Steve

[@nathanw4195]

Love your work Mate Good stuff

[@joshuarisley8091]

Steve is the engine whisperer...knows what they like, no doubt.

[@Cultofpersonality09129]

Nice work Steve!!

[@savagelife977]

You definitely now how to make powerful engines. Very professional

[@kentstephens4770]

This is great stuff. I hope these younger ones are paying attention if they want a quick ride. This is the tuning for the future. Thanks for sharing this.

[@neilfoster7797]

Just watched you on top gear. You made yourself proud well done 👋👋👋

[@markpayne1223]

Steve Morris !! You know how to make POWER !! AWESOME !!

[@socalfun64]

Great Job Steve! Ol Cleet’s gonna order a couple more soon! 👍🏻

[@richardvoss77]

Sam is an absolute national treasure he is someone to aspire to!

[@brianboys9015]

Enjoyed Steves video of this. Cool to get a different perspective.

[@Sauerbrew777]

Good stuff as always!

[@ytubesuxshite4497]

Just watched cleetus, pull a George, and now I'm hoping mullets OK after fireworks like that....

[@adamspencer3620]

From working on your back in the dark with James,piecing a vet together To playing with Steve Morris in your own shop 👍👍👍👍👍👍 Hell yeah brother

[@somedudesdad3905]

That was cool. Thanks for sharing

[@jasonbozanich3949]

I love how Sam is checking everything, can't beat old school . No one else checked anything, Sam was checking fuel leaks, oil leaks checked the fuel even and gave you the thumbs up. Respect

[@jarnosaarinen4583]

Sounds awesome!

[@glamiskid50]

Steve you’re the man never seen Garrett so happy your big blocks the way to go two thumbs up

[@LowSRider]

Another successful engine build. Can’t wait to see it at the track.

[@allgasnobrakes4221]

Go ahead and start building a bigger shop Steve your gonna need it! Awesome work!

[@TheSteve1175]

Loving it Steve 👍

[@stub4488]

It's interesting to watch how high the rear end goes during full pull...watch the fence line.

[@Matty.Hill_87]

And that's strapped down, imagine what it'll do when it isn't

[@geoffgoldplum1231]

@@Matty.Hill_87 instant wheelie to the moon

[@Matty.Hill_87]

@@geoffgoldplum1231 I can't wait to see the full video of that little clip cleetus uploaded

[@twarken5078]

@@geoffgoldplum1231 that’s precisely what happened at Bradenton last night…

[@brandon65960]

Love the content and just big respect to you mr Morris!! 🇺🇸🔥🔥🔥💯👑🥇🚀

[@DyingBreed85]

Killing it Steve!

[@reneescouch9035]

Awesome video man!

[@badassbrian11]

That is one badass unit. And let me tell you the anticipation of waiting to see you guys make a pass on the track with that thing I cannot wait😶😶😶😶😶

[@scoobydoo5925]

thanks Steve!

[@jaredfarney675]

The behind the scenes look was neat. Sam is a great guy! Thanks for the tech. I thought you were gonna flip the shop as well 😅

[@757warbirds]

Nice job on engine and tuning Steve

[@stillperfectgenerations5852]

Props to Steve, and to Cleetus and his entire crew! Mullet is one bad machine!!!

[@danielfmyers]

This is way better than if he had built a jet car like originally planned

[@sailingwind326]

Steve you are the man hell yeah 😎 👏 🙌

[@sjprprod6804]

boost make people happy !!!! i love it ! for sure bro ;)

[@EASTSIDERIDER707]

Gonna need a hub dyno if you keep building big power. Kevin built one solid car.

[@rogerperez5352]

Cool that Mr. Sam is there helping on a 2000hp set-up I've never been in front of a 2000 horse power car (mullet beast) great content Steve Morris.

[@microbuilder]

I like how the microphone during the start of the pull is like 'this is fine' then a second later its like "nope!"

[@jeffhopper3526]

Steve, congratulations on breaking 100K Subscribers in big fashion!! Well deserved!! (My fav channel, btw.)

[@JohnRoberts71]

Great content thanks for sharing

[@pinkyscustomrcs2060]

Steve your a beast brother.

[@2rueblue]

A man of experience is our Sam, I'm guessing he has got a few fat ladies singing as when all the boys were jumping about like spit on a griddle when it pulled 1830 he was underneath looking for wet spots he knew that girl was just at the tickly bit and needed a little more to get her done. love the way he smothes out the exuberance in their crew, maximum effect minimal effort, every good shop should have a Sam. Sir you build outstanding hearts for beasts I love the channel and I love how you are so generous with your time and skill showing us how you make these fantastic engines, a real top class engineer. Thank you and best wishes from Scotland

[@johnstarkey5366]

Congratulations on hitting 100K

[@600wheel]

I watched your video of you building this motor over a year ago but you put a blower intake on top of it which threw me well I am glad he’s finally put it to use it’s been driving me crazy

[@guslefort7042]

Well one thing is for sure…..Zack is really looking after his Baby….Cleetus drives it but Zack is the man with the wrenches….I see him taking this on as a personal project….Already mentioned how he is to maintain the car which is him stepping up…..Great crew. Surround yourself with motivated people and things work sooooo much better.

[@JRGinz]

Steve is the man.. period!

[@KCadbyRacing]

Nice to finally see your Subs and Views starting to go up where they should be Steve 👍 Sam is the best, never stops keeping eyes on everything...

[@darylmorse]

Amazing!

[@4113N5]

“ I’ll fix that “ LOL Sweet upload, thank you Steve!

[@wade6663]

Be cool to see a video on spark plug reading! My bad just found the video on plugs in tech tips! Thanks. Cheers!