FINALLY! True Cable Management: Creality Falcon2 40w Laser Cutter

[@scottmorris4914]

I have been searching for a laser. And had decided on the Creality Falcon 2. And then I found the Algolaser Delta. They only have a 20 watt laser right now, 40 is due out in October. The laser is built where it operates as well as a 30 watt laser. The beam is so tight, that the cut line is thinner and more concentrator so it can cut thicker materials

[@mattsara2802]

😂 the beginning 😂 totally Dad joke

[@loretomazzola403]

Nice job! I'm kinda new at this. Can you tell me what you need to power this machine? Cheers

[@onsapplikasies8620]

Loved the plane sound effects.

[@srairmand]

I was debating whether or not to upgrade my module. This machine would be my option. Thanks.

[@terranceweis5231]

Well that definitely helps me with my decision on what laser to start out with. Great video. Thank you

[@Samcraftcom]

Glad to help

[@GrantLehmann-k1j]

Hey what are the dimensions of the actual Laser Module? . I cannot find the info anywhere.. Love your video

[@duanebeyer950]

Catching up, love the SR71. Looks great.

[@helenparsons364]

Do you no what are the differences in cuts with the 40w and the next w down?

[@GnatTheGnome]

definitely beats the cable management on my Elegoo Phecda 20w

[@magnusltd]

Nice machine. Excellent cable/hose management. Thanks Sam!

[@espadasmoran]

have you tried cutting 3/16" steel 304?

[@skrtskit1521]

Another great lesson. Thank you. 💖💖🎶🎶

[@lavernejones6520]

Great video Sam. Are you going to build a better enclosure, better than the soft one from Creality? I ordered a a Creality laser b4 I saw your video. Need a better enclosure.

[@trentengregg2936]

Hey Sam, unrelated to the video, but curious on where you purchase your slate coasters from?

[@ArievandeVorst]

Hi Sam. Is it possible to cut Biothane in one cutwith the creality 22 watt or 40 watt. In all videos theo show cutting if wood. What is your expierence with plastics?

[@classifiedmp]

Nice video Sam. Only comment is that the ME262 engines should be under the wings instead of on top.

[@RoyWCanada]

Hi Sam great info/review. I really like the main safety features and the cable management. Nice choice of projects to fly along with the review ( groan ). Thanks for the video looking forward to the next one.👍

[@sammylindsey7151]

Any input on an issue Im having with my Falcon2 40w. It randomly loses connection mid operation. I have to unplug usb and plug back in to reconnect. If I'm engraving multiples of the same job separately it does it on the first one and then runs flawless for the rest of them. I've the usual like disabling sleep and usb going to sleep. Not sure what I'm missing.

[@fretworkpeddler]

Great video! Thanks, Sam.

[@deannaoverstreet4146]

Thanks for sharing Sam!

[@jamesrandolph3075]

What is the cutting size of this machine? Can't find those specs anywhere.

[@lorenmeyer5290]

How COOL is that Sam! Always Love watching!

[@davecampbell1949]

Hi Sam, absolutely love your videos. Just a quick question. I have this Creality Falcon 2 40W unit on the way and looking at magnet thicknesses to hold down warped wood. What is the minimum focus height from the laser body to workpiece? I want to buy magnets thin enough that the laser head wont hit whilst traversing. Cheers

[@jackhelm9852]

Man there are a ton of nice ease-of-life changes here that make this a wonder. I hope the other MFG's start to pick up on some of these. I would buy this for the lens detection and air detection alone!

[@victoriakonung9369]

Hello, I have a question. I'm kind of straggling here. for some reason I don't have a light that shows me where the cut is going to be exactly.I dont' know the name of that thing, but I saw it in other lasers and here It does frame, but there is no light that would show exactly the place of engraving and if i need to do it on a very small item I really need that light.Please, help🙏🙏🙏

[@johngaltman]

I am still learning about laser machines before I purchase one, so please excuse the question if this is obvious, but can you control the 20w or 40w laser toggle in the software, or is it only physically on the machine?

[@Samcraftcom]

I only found the physical button to control it.

[@steveemmins3728]

Tremendous job on your video. Very informative and you’re very personable on camera. Well done. Cheers from Toronto 😎

[@Samcraftcom]

Thank you very much!

[@crochetingmemorieswithcj6408]

Can this laser do a full wrap on a 40 oz Stanley

[@heffe2001]

Just a FYI, Ortur wasn't the only company with a metal enclosure, Atomstack made one as well. I'd planned on getting one when I first got my old A5 Pro, but ended up getting a big Co2 and pretty much retired the Atomstack (just recently sold it). Creality can make some really nice stuff, but you can also run into quality control issues with them (like anybody else I assume), so there's always that 'your mileage may vary' aspect in the back of my mind with their stuff (this comes from having about a dozen of their 3d printers over the years). Still, that's a very nice looking machine, just wondering how it compares to the simiarly priced xtools?

[@diybettr157]

Like the planes. Do they fly well?

[@itsjustmetomc4848]

You a poet and I didn't know it! Another great video!

[@montecook9858]

How is the support system with Creality?

[@wendyburston3132]

Cool planes

[@eriksiegler5832]

What lightburn software are you using? have one on order and wanted to start using the program and saving a project/fiddle around with it.

[@Samcraftcom]

There is only one version of Lightburn. Your license depends on your machine type.

[@eriksiegler5832]

@@Samcraftcom I wish this was the case downloaded it and it gave me a few options then it asked for the machine and I tried typing it in... IDK when I get the machine it will specify or discover what I'm using and set me on the right track. thanks for the timely reply. I'll let you know when it happens though.

[@gigmaresh8772]

Well, that is great for wood. How about 1/8 inch aluminum sheets. I want to re-create the plastic logo on my Boler camper out of Al. That would entail removing depth as well as cutting the outline. Show us some metal 😅 Thank you

[@Samcraftcom]

No lasers in my workshop have the ability to cut metal.

[@bneil4059]

The upcoming version with a phaser module should handle metal.

[@aristokrat965]

hi can gold mirror cut acyrlic

[@mikekidder]

Great review, just found your channel today.

[@Samcraftcom]

Awesome, thank you!

[@nigel8649]

Does it have WiFi?

[@bryans.82]

I have a question. For some reason, my D1 pro 10w is not measuring correctly. For example, a 5x5mm square will be 6x7 or 7x7. Do you know why it is doing that or how to fix it?

[@pmartin6759]

👍👍👍👍👍👍👍♥️♥️♥️♥️♥️

[@BrendaDavis-1963]

You use

[@BrendaDavis-1963]

Meant what kind of glue are you using

[@photonashville]

After years of frustration with Creality 3D printers, I will never buy another of their products, don't care what it is or how awesome it's claimed to be. Done with them.

[@sandracunningham2689]

🛰🚀What has been your most rewarding and challenging creation on the laser?