FINALLY! ZT 0609 Disassembly, Kershaw STP Tool & Long-Term Review

I FINALLY received a Kershaw STP tool so I can take apart my Zero Tolerance 0609 and give my long-term thoughts on this great EDC knife.
Kershaw STP Tool Instruction Video - • Kershaw - STP Tool
Make sure to visit White Mountain Knives at www.whitemountainknives.com and use the discount code SDWMK at checkout for 10% off!
If you enjoy these videos and want to see more, please support us on Patreon at / sliceydicey Thanks in advance.
Check out the Slicey Dicey Podcast at / sliceydiceypodcast
Check me out on Instagram @sliceydicey75 and Facebook at / sliceydicey75
Email me at [e-mail]
#sliceydicey #knifereview #edc
If you want to contact me the old-fashioned way or send stuff for me to review, my address is…
Slicey Dicey
PO Box 18672
Rochester, NY 14618

[@aaronmulcahy2004]

Thanks for the video. I love the knife and carry it everyday as my EDC. I am going to order the tool shortly to improve the action.

[@johnagen3688]

Can't say enough about my 0609, I absolutely love it! !!!!!

[@hityoutwo]

Thanks for providing a look inside this knife! Also, its nice to see ZT using the hardened steel washers with this knife.

[@Tmankiller72]

Nice video! I just swapped hardware and blades between this knife and the 0609BLK. The bronze scales with the flat black hardware and blade looks great 👍! Thanks for the helpful vid!

[@anything_knife_related5647]

Just purchased the tool after this video. Thanks for the Kershaw Guy tip

[@rafaelreig8246]

Awesome!!! My STP tool cannot be far behind

[@michaelniedorf8046]

One of my favorites I have the blu blk version the detent is really weak but it flips good

[@magnusnordstrom9594]

My 0609 haven´t been disassembled either, don´t plan on taking it apart either.....it works just fine but i´ve sharpened it once with my DC4....

[@aray9628]

Awesome glad to see u finally got the tool to be able to maintain the knife. Where can I find the stick of loctite like that? Great video 👊✌

[@SliceyDicey]

I got it on Amazon.

[@dcrickerson7611]

I enjoyed the video. Good looking knife. In my opinion if a knife takes a special tool for disassembly It should be included. Increase the price a bit if needed but included it. Any chance you have a video of your finger injury? We would love to see it!

[@murrayannandale]

Did the bearings make any tracks on the scales of the knife? Thanks for these videos by the way, some of us really appreciate it.

[@macro820]

Don't worry about cutting yourself. I always tell people who are worried about getting hurt by my knives that I'm the only one I've ever cut. My wife cut her finger tip off so be glad it's not that bad lol

[@madgurkha3687]

Wish they went with a D Shaped pivot. Would make is soo much easier

[@richard66754]

We knife guys always have sliced up fingers. It’s all part of the experience.

[@jcb6713]

...FYI….in stock BHQ...as of 5:35 CST...online order only...have a good one...

[@Taquitos95]

Wonder if shabazz will review this thing now

[@MrGeerbear]

Sliceman- I think the proprietary hardware should include the tool. That being said the tool was fairly expensive at $17. Pretty poor planning to put out the knife w/o having the tool ready. Probably should have had a captured pivot from what I'm seeing. In the end it is a nice knife and the tool is finally available. Only complaint is it would be nice to have a filler tab for the show side. No swearing? WTF :-) Knife cuts are typically very clean cuts that heal quickly once bandaged.

[@Keith_the_knife_freak]

Nice job.... watch out for those fingers 🤣🤣😂😂 👍👍👍👍

[@BigCountry-df9rj]

You consider 6 months of use excessively dirty? Outside of MAYBE oiling the bearings on my ZTs, I virtually never take knives apart unless they start to act sluggish in deployment

[@gammarayburst4763]

Great video man love the disassembly part should do more of them. Painter tape comes off easier though. Love the channel. Any chance you wanna sell your three rivers neutron yet can’t get one anywhere. I’ll pay more than market value. Lol.

[@SliceyDicey]

No. And they had a few on BladeHQ the other day. And there will be a few available on the site at the end of the month. They just did a pre-order for another run and they always have some left over.

[@gammarayburst4763]

All I saw was the viator and I bought it but I want a neutron.

[@SliceyDicey]

Keep watching for the end of the month on the TRM site.

[@gammarayburst4763]

Slicey Dicey thx

[@robertlefeaux]

Never thought I'd see a knife with dlc.

[@rickkerans8485]

Wheres the link to get the tool? No cussing I am impressed.

[@SliceyDicey]

kershawguy.com

[@carknelson5895]

I have wanted this knife since it was released but some people said it had a weak detent and I’m scared.

[@SliceyDicey]

Well mine was definitely NOT weak. I'm glad it's broken in a bit.

[@MrGeerbear]

+ Cark- I'm seeing some inconsistency with ZT's detents. They used to be very hard, so I could see some softening, but I am seeing some inconsistency as my ZT 009% was weak. Slicey adjusted it nicely for me. With so few models each year ZT needs to get their act together on consistency.

[@aaronwalker3736]

Just loosen the pivot a little but not to where there is blade play and the action is superb

[@aaronwalker3736]

That’s what I did to mine

[@SliceyDicey]

I couldn't until I had the tool.

[@enice617]

Where’s the pocket clip from again?

[@SliceyDicey]

MXG Gear

[@lenzielenski3276]

That's dirty? In 5 months you had to blow it out a couple times? What have you been up to? I carried my Sage 2 for 4+ years, 5 days a week. Never cleaned, lubed once, never disassembled. Still works great. I've carried other knives almost as much and with just as much inattention. I think the whole clean/lube thing is over rated.

[@MrGeerbear]

Len- Baz on Blades has an interesting video on washing knives. May be a bit more time consuming as you have dry the knife thoroughly, but the upside is no stripped screws.

[@PkwyDrive13]

It'll never free drop unfortunately because the blades so dang light

[@nebulamask81]

Emergency room? Nah, usually just superglue time. (Don't do this kids)

[@SliceyDicey]

I always have the skin glue around. Reflex from my MTB racing days! I glued it and put a butterfly bandage on it. I'll survive! It's just on my damn knuckle so I can't bend that finger much.

[@MrGeerbear]

Don't use superglue. It is toxic. Use skin glue made for the job.

[@shapz9975]

You wouldn’t have to clean out your pivot so much if you didn’t put so much lube on it but I’m sure you already know this

[@alexmarhal4444]

Memerlukan lebih ramai orang jadi sebarkan video ini lebih banyak

[@macro820]

They spelled stupid wrong lol

[@bonzerrrrr]

Now we know why you're called "Slicey Dicey" 😬

[@fatmanandschizard]

2/10 not enough swears

[@sinjon]

This thing is miserable to take apart.