too busy looking at that beautiful neighborhood. Missed the whole training.. Kidding. Good stuff. Thank you
@Cbrplay Жыл бұрын
I had to pause the vid to say “a wet/dry vac is handy in this situation. Suck the water away and even any debris that fell into the line. Or dig a bigger diameter hole” great info so far!
@wacokid2532 Жыл бұрын
You could teach just about anything - excellent turorial !
@robertlonergan3359 Жыл бұрын
Excellent! Of course NOW I want to check and clean every head and filter amd find my leaky culprits....
@Puckhead086 Жыл бұрын
Woke up this morning to have a cup of coffee on my back deck and saw a hole filled with water in a dirt patch where I’ve been trying to reseed. Wondered what was up with that and discovered a buried sprinkler head. Quick Google search and I found this video. Now I know what I’ll be doing today and hopefully with a level sprinkler head can get some grass there this summer!
@tilu3303Ай бұрын
At 10:10 you could've just put the nozzle back on with the water running so we could have some fun, lol. You could've mentioned that the riser may need to be FPT to MPT (as in this case) or MPT to MPT, depending on the installation method used. The system I installed 30 years ago was using 3/4 inch PVC pipe with 3/4 x 3/4 x 1/2 FPT tees, so the risers threaded directly into FPT of the tees. I wasn't aware of installations utilizing swing pipe in the early 90's.
@Fred7011510 ай бұрын
I have a bunch of those. Thank you for the clear instructions.
@donahunt8322 ай бұрын
VERY nice, exquisitely clear video, thanks
@frankwilson62252 жыл бұрын
Extremely well done! Very helpful. Thanks!
@melindaS.2 жыл бұрын
Perfect! Great close up shots, easy step by step instructions with pictures. So well spoken a senior can understand what the next step is, without having to rewind over and over! Thank you so much this was exactly the thing I'm trying to accomplish. Cross your fingers!
@ColumbusLandscapers2 жыл бұрын
Good luck with your project. 👍
@mitchjohnson4714 Жыл бұрын
Legends tell of a sprinkler head in an area of my yard, but I haven't been able to find it.
@captainedcАй бұрын
Very good video. Only thing I would add is to wet the area around the head and let it sit a few minutes before unscrewimg the old head. Then sediment wont fall down in the hole and it will stay like a tube.
@rafaelochoa97762 ай бұрын
Good tips. I have a huge dead area between me and my neighbor. I’m guessing I have a buried sprinkler head on my side. Hopefully its on my side
@tex242 жыл бұрын
Great video. Now I just need to go out and locate my buried valves. 🙂
@gloriamenchero1926 Жыл бұрын
Very well done and explained. Thank you!
@ColumbusLandscapers Жыл бұрын
You're very welcome!
@DoYouLikeThisName2 жыл бұрын
Thank you! I have a sprinkler head that is overgrown like this and just floods a area from underneath the ground. I guess I'll dig it up and do what you did.
@diamondtran83312 жыл бұрын
Thanks for sharing your valuable knowledge!
@hesterlau9540 Жыл бұрын
Thank you for sharing!!! It’s really helpful
@chrisjohnson89682 жыл бұрын
Good stuff! Thank you!
@fishtexas7772 жыл бұрын
Execellent video!
@raygirlFL2 ай бұрын
Awesome video!! Huge help. Thank you!
@ColumbusLandscapers5 күн бұрын
Glad it helped!
@joshjuarez5047 Жыл бұрын
Just had to subscribe
@gmax3412 жыл бұрын
Nice! I’m helping a neighbor with their system that was installed many years ago and has been offline for the past few years (electrical issue). There’s one particular valve that when turned on, nothing happens. I figured a line blockage or buried heads. No maps or anything to aid in locating the sprinklers except the guess of where they believe the heads are.
@ColumbusLandscapers2 жыл бұрын
I'd suggest checking that there is power to the valve with a multimeter. You can also try to manually override that valve. Start there and see if one of those is your issue. Good luck!
@gmax3412 жыл бұрын
@@ColumbusLandscapers thanks! They actually don’t have anything fancy. Just manual hand knob valves. I’m sure the heads are just too buried
@davidcolasurdo2282 Жыл бұрын
I use me metal dector
@albertmo1722 Жыл бұрын
Hi, Outstanding video! What is the name of the tool to take out the nozzle? Best, Albert
@cspill99 Жыл бұрын
I have an old copper irrigation system. what's the best and easiest way to rise the heads to the current grass level? The current heads don't even seem to be solder on the pipe.
@RitaMorrical-io5nz Жыл бұрын
In have same problem. I do have concrete donuts n even have put 2 around it n still runs over it n breaks...
@SamSSC104 ай бұрын
What is the name of the hand tool that you are using?
@ThePdxster Жыл бұрын
I tried to find a cut-off riser extension just like you showed in the video. I need 1/2" NPT, and the only size with a female on one end and male on the other is 2.5" long. They have a 4" with 3/4" NPT, but not with 1/2" NPT. I also could find gobs of different lengths with 1/2" NPT with male at both ends. It seems that most sprinkler bodies have a female end that screws into male swing joint elbow. So I would think that there would be TONS of different lengths of both 1/2" NPT and 3/4" NPT riser extensions with female and male ends. Am I missing something?
@ColumbusLandscapers Жыл бұрын
Irrigation supply for contractors
@EnthusiastCarHangar2 жыл бұрын
Good info! What is the riser called? I haven’t found that type.
@ColumbusLandscapers2 жыл бұрын
I showed 2 types of risers... The cutoff type might only be available at irrigation supply, but some big box home stores might have them too. Fixed size ones are common everywhere.
@bunnystitches85212 жыл бұрын
Well, duh. They’re linear & evenly spaced. How about locating one on a sprinkler system that was installed around very large existing trees & nonlinear. Then what?
@ColumbusLandscapers2 жыл бұрын
Tree root issues there.. your best bet there isn't to find the ones that you can and re-route the lines between them to newly installed heads.
@beludo06 Жыл бұрын
I’ve hooked up a water hose and let it flow. Look for wet spots and plug them to pressurize the others. One by one.
@jayrose9463 Жыл бұрын
Not duh It helped many Great video
@leedsbutler3567 Жыл бұрын
Yea then what!!!
@DoYouLikeThisName2 жыл бұрын
Whats the name of the tool you use to grab the sprinkler head?
@ColumbusLandscapers2 жыл бұрын
PTC1 Rain Bird Spray Head Pull-Up Tool
@Los7146 ай бұрын
What if my sprinkler is under the soil and I turn my irrigation on, will my pvc pipe burst?
@ColumbusLandscapers6 ай бұрын
Not likely because there's not enough water pressure, but you may get an underground puddle. Sometimes I've even seen sod bubbles! Normally it will cause an over saturated soft spot in that area of the lawn.
@Los7146 ай бұрын
@@ColumbusLandscapers that explains why my soil feels saturated and soft. Thanks for the video and the quick reply
@blueplasma55892 жыл бұрын
what brand is that?
@ColumbusLandscapers2 жыл бұрын
Think it was rain bird.
@diamond62563 жыл бұрын
Dang.
@gumball4662 жыл бұрын
Capit
@bendevries3032 жыл бұрын
Great info, thanks for sharing!
@cspill99 Жыл бұрын
I have an old copper irrigation system. what's the best and easiest way to rise the heads to the current grass level? The current heads don't even seem to be solder on the pipe.
@ColumbusLandscapers Жыл бұрын
Man I'm old but maybe not that old .... Sorry I've never messed with one of those. 🤔
@cspill99 Жыл бұрын
@@ColumbusLandscapers Is PVC sch. 40 or 80 need for systems in Michigan. Connecting it to copper lines that are already ran.