I admire the way your difficult pieces ‘click’ together! I always strived to get that type of fit when I was in the business. My boss used to refer to me as “No Nails Needed “. A lot of patience (and imagination) will result in great work!
@AFmedic4 жыл бұрын
When I saw the close-up of all the nails hole in the molding it brought back memories. When I was 9 (that was 60 yrs ago) my Dad did custom cabinets and remodeling and he started taking me with him during the summer. My job was to follow behind him with a hammer and nail-set and countersink every damn nail! Be thankful you live in time that has nail-guns, laser-levels, etc. My dad was a perfectionist and I know that he would be damn proud of your work!
@FinishCarpentryTV4 жыл бұрын
AFmedic6871 great story thanks for sharing. Yes modern tools sure make things a lot easier.
@garyK.45ACP4 жыл бұрын
I thought you were going to tell us about a new, compact, lightweight cordless nailer! 🤣 Love the series, keep 'em coming!
@ChrisD-kl3ty4 жыл бұрын
That's the new Dewaukee.
@TheCdrbaby4 жыл бұрын
Lol ya how are you liking the nailer
@cntrymnct4 жыл бұрын
Great work man. I’ve been building a reputation doing finish work as a side job and your channel is my go to for references and learning techniques and tricks. Thanks for your hard work.
@sparklander4 жыл бұрын
Nice transition on the molding next to the door. Truly the difference between a real professional and a DIY'er.
@joef15514 жыл бұрын
Sparklander the door trim should be done first and the wainscotting butting against
@Stoptheliars4 жыл бұрын
I used to be a trim carpenter before health issues put an end to my career. Wainscoting was my first “big job” my boss gave me to do by myself and I was surprised and happy with how it went. It was an awesome project that throughout the build you really see progress and end up with something that really changes a room. I enjoy your vids you seem like a good carpenter reminds me of my old crew and boss everyone was always surprised how young we were on high end jobs
@alexanthonyacosta81673 жыл бұрын
Levi stole the show bloopers are the best but of course your natural carpenter skills.... moments that kiddos will always remember more then the whole purpose of these videos
@skippylippy5474 жыл бұрын
Richard is gifted.
@jorgealbertoserranocervant94114 жыл бұрын
Finish carpentry is one of the list chalenging trades, no codes, usually no blueprints & affordable tools/machinery still there is a certain amount of skill needed. Keep up the good work!
@gregormann74 жыл бұрын
Love the way your dry sense of humor sneaks up on us. It’s good medicine to go with the good advice and example. Always enjoy watching you.
@superiorbeing954 жыл бұрын
You are so picky on your own work it is fantastic, I'd be lucky to find trades people like yourself every time.
@bobthrasher97994 жыл бұрын
Wow...nice solution...as I have mentioned before, my boy (who just turned 16) and I are building our own house...we have just start doing the finish work...doors and trim...we have run into a few install problems like this...your video has come out in a timely manner as I now known how to do this...Thank you...great work and help.
@TheBackyardFox4 жыл бұрын
Thanks for teaching your craft and for the humor! Keep it coming.
@mikez41324 жыл бұрын
I laughed out loud with the toy nailer...always some unexpected subtle humor. One of my fav channels.
@shawnhuk4 жыл бұрын
Ohhhh, I just fell in love when you just looked at this room, looked at the trim to SEE what the room WANTS for finishing...
@usiski854 жыл бұрын
that toy nailer is awesome, at first I was like what kind of fancy little nailer is that. Its looking pretty awesome, I enjoy watching whether i learn something or not
@crisvega75884 жыл бұрын
Hahaha I thought it was real too
@tinysand35174 жыл бұрын
He had me fool for a minute, I thought it was a new compact they just came out
@johnlimongello57164 жыл бұрын
Yep... I was like, wait a minute another tool I might need.
@AndreiMoroz4 жыл бұрын
moose it would have been a perfect nailer for tight spaces. Here is a kickstarter idea right there :)
@DeWaltManZ4 жыл бұрын
Hahaha I love all your videos, but hit the like button after that toy came out! Like the others said, from when you pulled it out, until it made the sound, I was thinking man! I didnt know they existed, but now I NEED one! I cracked up as soon as you hit the trigger! That trim looks amazing! Keep up the great work and awesome videos! Thanks man!
@mattberg9164 жыл бұрын
It's good that the door and casing and the wall run nice and plumb together. My projects are always old crooked houses
@jamesgallagher46554 жыл бұрын
Your thought process is second to none thank you Richard a great project.
@krishnavindra43374 жыл бұрын
Swear you make everything looks so easy . Keep us the good work
@alanmcgrath20094 жыл бұрын
Nice finish around the door Richard, I wasn't sure which way you were going to tackle it, yeah nice transition. You must be happy yourself that your closing in on it, I can get frustrated myself when I'm doing work at home and outside, i don't seem to get enough time at home, but I like so many others on this channel have to keep the wolf away. Great work it's a credit to you already.
@547Rick4 жыл бұрын
This series has been great! Thanks for sharing!
@stevenfoust37824 жыл бұрын
The door casing area would have been far easier if you had done that before the wainscoting. The back band would just been installed with it pre cut to the established chair rail height. That’s how it was done in the old days and old time carpenters new best. Excellent job on the room build out.
@msotolopez Жыл бұрын
Thank you for your videos, very informative and helpful in helping me start my wainscoting install.
@markpalmer53114 жыл бұрын
Excellent workaround. My favorite part of building our house was watching the trim crew work.
@theothermarshal4 жыл бұрын
Great solution around the door... it's really cool to see how you approach these challenges, thanks for sharing!
@taylor81094 жыл бұрын
Nice job! Typically other people that didn’t do the work on a project will never know or will be able to appreciate the problem solving that goes into details like this. We enter a room and know what went into it and see the detail while others don’t hahaha
@robertgregilovich22294 жыл бұрын
Best trim work I've seen!!
@johnszpak15124 жыл бұрын
That door trim solution is really elegant. Much better than “decent”.
@jedidyuh4 жыл бұрын
When I replayed and realized that you were talking seriously about sealing the gaps with pressure for like a minute, while holding the toy nail gun and knowing you would do that bit, great acting
@texasfossilguy4 жыл бұрын
Your house is starting to look really awesome.
@ecarrillo714 жыл бұрын
Loved the toy nailer! 🤣🤣🤣 Great job with this series so far. I've learned alot.
@michelelanni92054 жыл бұрын
Lmaooo the nail gun part was hilarious 🤣🤣🤣 Beautiful job by the way
@aaronmcghee79022 жыл бұрын
What's up Mr pro... So we have talked before on here... I thought I had watched all your videos but I just found your wainscot series in your old house... But really I'm just writing ya to say.... You be acting silly in this series ... 😂🤣😂🤣.... To me it really made you videos even better
@ThoughtsAreFreedom4 жыл бұрын
You’re a great teacher.
@manuelrivas91414 жыл бұрын
Beautiful work,time consuming but you nailed man,thanks for sharing your expertise Richard, keep them videos coming 👌👌
@chipshot4424 жыл бұрын
Great Video Richard, best part was Levi's nail gun. LOL
@pablogamba16514 жыл бұрын
Oh man! I was hopping you would do the corner part of your cap. I always have problems with corners
@mchaplinjr4 жыл бұрын
Love the insert of your kids play nail gun!!!
@douglasdurham65484 жыл бұрын
Definitely a head scratcher, great job.
@FinishCarpentryTV4 жыл бұрын
Douglas Durham thank you
@jaderassolari43444 жыл бұрын
Professionally done!
@dokmanian4 жыл бұрын
was that the new DeWaukee nail gun so compact. I love how you finished the door trim
@Jason-qq5rp4 жыл бұрын
Nice transition, why not go all the way down to the floor with the cove? Just curious cause I have the exact same situation as your door frame.
@rifke4 жыл бұрын
Your work is GREAT.
@FinishCarpentryTV4 жыл бұрын
John Kurc thank you
@thebeardedman-drenaline55464 жыл бұрын
Sup bro! Nice work! Would it have been easier to run the door casing first then run the Wayne's cot to the casing? That way the door casing would be the same all the way around..? I'm sure you thought of that....but maybe you decided against it for some reason?
@rlucas123484 жыл бұрын
It looks great man! Wonderful job! 👍🏻
@kennyshepherd83114 жыл бұрын
Dang! You do good work, thanks for sharing!
@dcollea4 жыл бұрын
If you had it to do over again, would you have shifted the door rough opening (I'm assuming you could have) over 3/8" ? Then the door casing would have been flush with the wall without the 3/8" dust trap
@richardrodarte82124 жыл бұрын
Could you share with me your thoughts as to why you wouldn't extend the cove moulding to the floor on the door casing (left side) to match the right? I'm curious as to your vision on that tricky transition.
@FinishCarpentryTV4 жыл бұрын
Richard Rodarte yes. I could do that but the I would have two coves clashing under the cap. Also I see this as the casing has terminated at the cap.
@richardrodarte82124 жыл бұрын
@@FinishCarpentryTV Thank you for your response. My son and I have watched your videos and just finished a rather aggressive "finish carpentry" project at his house. We're a couple of "mortgage guys" and have enjoyed doing this project. Your willingness to share your tips truly helped! Keep'em coming!
@cashmoney74974 жыл бұрын
5:54 was the best part of the video. I was laughing my ass off
@weezer10884 жыл бұрын
Sweet! That came out nice and spot on .
@jerrygrayson654 жыл бұрын
Please inform us the number of teeth on your 10 inch miter saw you prefer to use when cutting primed white solid wood molding (such to be found at Lowe's or Home Depot) Not MDF or finger jointer wood. Also I know you are using the Milwaukee Gen 2 Brad nailer but I have yet to see a video where you have used a finished nailer. I do not use or own a finished nailer and when I want better holding power I use a longer brad or brad and glue. Do you do the same or do you sometimes use a finished nailer? I just finished a challenging kitchen remodeling job installing floor and cabinet molding and you have given me the guidance and confidence to succeed. Thank you.
@FinishCarpentryTV4 жыл бұрын
Jerry Grayson yes I used a finish nailer installing the units. 15G dewalt. I have 16G palsode too.
@roberthatcher27734 жыл бұрын
Great work as always! greetings from UK.
@AtticusDraco4 жыл бұрын
Finally! Relief for my ocd I'm kidding, I don't have ocd. But that left side of the doorway was bugging me for weeks now :/ Thank you for finally getting to it Good job, good series
@peterhaan90684 жыл бұрын
It's still bugging me. What is with the remaining gap between the wall and the moulding?
@philprowse84344 жыл бұрын
I have a question about scribing walls when running the wainscoting cap. on walls that are bowed, but have like window trim, or door trim in place where you can’t place a board flat against the wall. How do you scribe it without removing the trim out of the way? And do you measure the largest area where the wall bows concave, and add that to the width of the board prior to scribing? Sorry for all the questions, just new to scribing.
@terryclarke83004 жыл бұрын
I would like to see how you do the bull nose corner with the cap.
@Timshowtomake4 жыл бұрын
Again so funny ,🤣🤣🤣 this time I was waiting for hahahaha kids nailer ........... Keep it up please it is so refreshing
@simspektor4 жыл бұрын
Love your attention to detail.
@athhud4 жыл бұрын
Damn you! I was excited about the tiny nail gun (for a split second, I’m not an idiot). Lol
@davidcerce4 жыл бұрын
Hi Richard, I have been following your videos and I enjoy learning from you. How would you cut short pieces of moulding, like crown for example, at 1/2, 3/4 or 1 inch long?
@sprice24734 жыл бұрын
Really like your work but not keen on that 3/8 shadow gap between the architrave and the wall. How come you didn't go tight to the wall? Like you say though, so many variables to work with, it's tough to get everything to work. Keep up the good work man
@scottyee7074 жыл бұрын
Im starting my house right after next video. Thanks for the info!
@matthewbolton13834 жыл бұрын
Hi, love your videos. Can you tell me how you would go about fixing picture boxing to a masonry wall ( i live in the UK ). Thanks.
@ronharris914 жыл бұрын
That's beauty. Great work.
@1BadRAMLimited4 жыл бұрын
Dammit you make it look so easy lol great work my brother!
@kmonnier4 жыл бұрын
I got a kreg multi mark and it is great and light
@miketerrine11314 жыл бұрын
Can you show the room when its painted!?
@regihamp02064 жыл бұрын
Ok love what you did with the door casing closest to the window,but how would you case the door if there were two doors at 90 degrees to wash other?
@Foche_T._Schitt4 жыл бұрын
You might be able to carry your cove molding down beside your door. I don't think the 1/8th difference will be noticeable.
@jimfeaster48374 жыл бұрын
Very nice
@georgebaur11454 жыл бұрын
Very well done. Looking forward to he next video.
@HBSuccess4 жыл бұрын
Good Solution Richard. In new work these situations can absolutely be avoided... by the building designer or architect. All those trim details should be worked out on paper. Remodeling you often do have to make it up as you go.
@FinishCarpentryTV4 жыл бұрын
Tioga Fretworks I totally agree. Would be nice if every builder gave about 5” from wall to door every time.
@scotland22564 жыл бұрын
@@FinishCarpentryTV I really can not understand why this isn't standard for building regulations In the UK. So much wasted time making stuff work like this for the sake of moving the door openings 1-200mm away from the wall
@elvis4594 жыл бұрын
Think you should have ran the cove moulding all the way down the corner.
@booboo85773 жыл бұрын
Then you would have had to deal with it at the baseboard. His was the best way.
@elvis4593 жыл бұрын
@@booboo8577 Actually, he said in a follow up video that this was the way he should have done it and he was going to look at it again.
@booboo85773 жыл бұрын
@@elvis459 Still doesn't address the intersection of cove and baseboard. How did he fit the two together in the end then?
@elvis4593 жыл бұрын
@@booboo8577 The base board has exactly the same moulding running along the top so a 45 of the two mouldings would have finished it.
@totallyhosed4 жыл бұрын
I've been looking for ideas on how to integrate an HVAC vent into wainscoting. The vent opening is 13" from the floor and 4 1/2" from a doorway. The opening itself is approximately 11" x 6". Because it's so close to the doorway it has potential to interrupt the casing as well, which is 4 3/8" wide. Any suggestions would be greatly appreciated.
@lenny8774 жыл бұрын
Hey bud I know you love DeWalt, Is $299 a good price for the DWE7480 tablesaw ?
@lenny8774 жыл бұрын
@chefpete1978 that's awesome I just bought it to , That you for the advice seemed like a pretty good price
@littlemissy83564 жыл бұрын
You are the man!!!!!!!!!!!!!!!!
@justinreilly41114 жыл бұрын
lmao. "Levi"!!!. my sons name is levi too, and what a character he is.
@m.a.r.services57204 жыл бұрын
Dang Richard! that's coming out nice.
@danielgeng23064 жыл бұрын
It’s looking awesome Richard ! Thanks for all the tips, are you going to add a link to that micro nail gun you were using ? Lol I wrote lol so you wouldn’t think I was an idiot! Lol this lol is for real ;)
@oscarmike50594 жыл бұрын
A good carpenters intelligence is always underestimated. Always thinking on our feet
@snlee20044 жыл бұрын
Also, please do a video on scribing baseboard! 🙏🏼☺️
@warrenpercell2974 жыл бұрын
Did I miss it? Why the gap between the 1x2 back band and the wall? What do you do with the gap now?
@Tom_Prendiville4 жыл бұрын
I get the need for making things even especially when things are far too visible but why have a gap at all 🤔 from a painting and decorating perspective it's a pain in the butt and from a cleaning perspective it's where the spiders live which means cobwebs/spider webs. Fantastic work man 👍🏻
@MrNorthstar504 жыл бұрын
Just ask your wife she will let you know if you did it right or not.
@speedgonzalez4894 жыл бұрын
it was his final reveal on his casing. the casing on all three sides is the same width. So when he caused the left side of the door that was his final reveal against that wall. So 3/8 all the same meant that he did a perfect job on the casing of that door.
@Tom_Prendiville4 жыл бұрын
@@speedgonzalez489 thanks for explaining what happened, I guess i should have watched the video instead of just randomly commenting 🙄. I will try again in plain English. His work is fantastic. I, like many others "understand" the need to make things look "even"........."but".........leaving the gap is a pain in the ass later on for other trades and homeowners as it's an "unnecessary" gap, it would "imo" would be better for a number of reasons to have no gap at all. I can explain in sign language too if "necessary". Kind regards
@SteifWood4 жыл бұрын
Agree, I would have used a tiny wider casing around the door so that it filled the gap, and installed that before anything else (it's a breeze to split and finish a wider board to propper width with propper tools, even a hand plane works :hahah)
@speedgonzalez4894 жыл бұрын
Thomas Prendiville you don't have to be a dick or do you want that in sign language. I was just stating the reason for the gap ass!
@jerrygrayson654 жыл бұрын
Thank You, when you cut wood molding pre-painted solid wood common at Lowe's, how many teeth on the blade do you prefer.
@LanceTruett4 жыл бұрын
I think you should take that cove mould down. It planes out right to go below the cap mould. IMO
@LanceTruett4 жыл бұрын
But you’re tryna leave the wainscot separate from the door casing? Anyhow. I’ve done weird stuff before that turns out great. Really enjoying the series.
@customrefinishingSTL4 жыл бұрын
Where do I get more nails for my Fisher Price Master Trim gun? Ever since you aired this video Amazon has been sold out!
@FinishCarpentryTV4 жыл бұрын
Mike Boyle haha! I ordered their entire stock because that nailer is so good!
@customrefinishingSTL4 жыл бұрын
@@FinishCarpentryTV - you cornered the market bro! Kudos
@speedgonzalez4894 жыл бұрын
and don't forget toys r us went out of business!!!
@johnwiegand1904 жыл бұрын
Seriously thank you for the content. I’m putting a few wainscoting units in and was having trouble with my mdf splitting when running pocket screws in. I’m using 3/4 material and 1 1/4 inch coarse thread kreg screws. I tried setting the kreg jig and drill guide to 5/8 material and it seemed to work better but I’m still getting splits. I’m trying not to over drive it with the impact. Any tips?
@dominicmontellano81244 жыл бұрын
That is a nice transition..I had a question about a situation were u want to end ship lap at a corner ..I'm sure there r a ton of ways but ur opinion is valued I successfully made it around a bull nose corner as you did on your stairs but need to end it..any suggestions?
@FinishCarpentryTV4 жыл бұрын
Dominic Montellano yes I think I know what you are talking about and I think we just did mitered returns.
@johnjackson-pu3xo4 жыл бұрын
Once again looking forward to the next one
@i8ab4 жыл бұрын
Love this series! You've given me the know how to do my own, thanks! One question, where the 2 styles meet in the right side corner, are they the same size as the others?
@i8ab4 жыл бұрын
Whoops..nevermind, just watched video #2 lol
@doug82374 жыл бұрын
I love how he shot the toy gun twice.
@MrVisde3 жыл бұрын
Welcome to my house…every door is close to a corner 😅 Trim turned out beautiful
@rwmagnus4 жыл бұрын
Nice solution.
@harleybuilds41994 жыл бұрын
!!Brad nailing tip: shoot the brad nailer gangster style if you’re shoot into something vertical, like the vertical sides of the door casings. It’s so that your nails don’t pop out from the side and ruin your work piece. 🙂👍🏽
@smokingcheeba4204 жыл бұрын
Samuri carpenter said that but it dosent always work out. It will find the grain and go out. It may help but not 100%.
@harleybuilds41994 жыл бұрын
smokingcheeba420 true! I only do it because it makes my mind at ease when I’m about to nail it in.😆
@pwj03154 жыл бұрын
Hey Richard How do you charge for adding wainscoting to a room similar to this, do you charge by the foot or what? Thanks
@zlock974 жыл бұрын
Work out a rough anount of days... then add 2 days ontop to cover urself +10% same with materials... if u supply... add 20%
@joselucio34704 жыл бұрын
Has the Milwaukee nailer been treating you pretty good. Mine went out twice and I had to exchange it. First time it completely just didn’t ever turn on and the second the firing pin got stuck out and I troubleshooted but still couldn’t get it and had to swap again.
@chevy19864 жыл бұрын
Looks good man.
@vincentwebster83134 жыл бұрын
Who else got super excited about a new tiny trim nailer !!!!!!
@shawnhuk4 жыл бұрын
I’ve been trying to get the guys to use their brains when it comes to trim intersections! There are many ways to make intersections look super awkward. Spend just a few minutes using your brain and play with ideas, and it’ll look good! Sanding and dap is not always the good option...
@snlee20044 жыл бұрын
Do you use a scarf joint to connect trim pieces in places where the wall is longer than the longest available trim? I have a wall that is about 24 feet long.
@melindaprincipe58064 жыл бұрын
Love the series! It’s looking fantastic! Just a quick question, did I hear that you mitered the cove but not the top cap?