You'd come in mighty handy right now..... with the attic project I have happening ! 🙂 Nice work.
@wildbitshomestead88114 жыл бұрын
Great video, thanks for posting. Would have liked to see the process of the finishing touches as well though. About to do same thing in our home to let some natural light in, nice to see how inexpensive it can be done with recycled windows. Curious how doing it this way would affect loss of heat in that room vs a double pane window.
@rebeccaj2106 жыл бұрын
This was so satisfying to watch. Thank you for making such a beautiful, and still informative video. ❤️
@willow30793 жыл бұрын
Good work! Just in time for my sauna. Kiitos from Canada!
@danachaelfarrimond95217 жыл бұрын
Cutting that glass was pretty impressive. As for the measurements, spot on.
@FinnCrafted7 жыл бұрын
I've had some bad experiences with cutting glass, but this impressed me as well. Very satisfying when it breaks cleanly.
@dseaborn29953 жыл бұрын
Great job and great video.
@dougn49425 жыл бұрын
From one finn to another 🤛😉 nice job ... nice clean cuts and angles !!!
@stevewalker78228 жыл бұрын
Great job. Natural light is the best.
@markopalikko69867 жыл бұрын
Good work! Just in time for my sauna. Kiitos from Canada!
@FinnCrafted7 жыл бұрын
Kiitos kun katsoit! Regards from Finland!
@kevinsmith19768 жыл бұрын
Really nice with attention to detail. Should last quite a while.
@DavidPlass8 жыл бұрын
Amazing work. Very impressive. I know that if I'd try something like that nothing would line up lol.
@ellisonmade3 жыл бұрын
Incredible 👏🏻
@jedidragon76036 жыл бұрын
Great work! This was just the video I needed to help me with replacing a triangular window, and great quality vid :)
@rivergate7 жыл бұрын
Nicely done.
@DivaBClub7 жыл бұрын
Love, and great job!! I'm trying to find out how to make a triangle window that opens and shuts, but not having any luck so far.
@FinnCrafted7 жыл бұрын
Thanks! My best bet would be to have it hinged at the base of the triangle.
@RobinCoomans8 жыл бұрын
Looks great! Beautiful work man ;)
@FinnCrafted8 жыл бұрын
Hey man! Thanks!
@phil.pinsky8 жыл бұрын
I love your videos, great work!
@FinnCrafted8 жыл бұрын
Thanks Phil!
@gypsymoontarotofficial Жыл бұрын
I think it's important to note that birds often die by hitting these windows due to the reflection of trees ect. It happened alot to me and it sucked. Solution was to add those cling on decals that cover the whole glass. They sell many different styles on amazon and still let the light in. It cut down the reflection of the land and trees on side of the house
@JWAM8 жыл бұрын
Nicely done!
@FinnCrafted8 жыл бұрын
Thanks JWAM!
@michaudjacques59298 жыл бұрын
great work
@linotrillo92976 жыл бұрын
Nice job just wanted to understand why using the Japanese saw when you had use the Miter saw before?
@maxthomas37695 жыл бұрын
I want to know too.
@Arthur-Silva4 жыл бұрын
Because....
@gisibabe3 жыл бұрын
Excelente! my husband will hate you for this video imma ask him to do this for me 😂
@canuckwoodchuck63968 жыл бұрын
Nice camera work and editing. Black is a nasty color for the glue, we use polyurethane like PL Premium in North America and it's much closer to a wood color. I could feel the relief when you were holding the off cut after the 2nd glass cut, especially with a triangular cut!
@FinnCrafted8 жыл бұрын
Yes i have noted that North American construction adhesives often seem to be wood colored. I know of only one such glue here in Finland. I like this polymer glue as it does not stink like polyurethane. It also comes in white and clear. I was VERY surprised that this old glass split perfectly on the first try.
@ytkealoha8 жыл бұрын
You have super thick board on board siding, 2"? i have 1". You did not rough frame around because of thick siding? No flashing either, because high and covered?
@FinnCrafted8 жыл бұрын
Siding is 1"+1" boards, so yes 2" total. It may be hard to see because of the darkness but at 7:34 i am screwing the frame into 2" rough framing attached to the inside of the siding. For a barn i don't think flashing is needed (in my country anyway). Wood can take repeated soakings if it is allowed to dry properly in between. I cut the opening for the frame slightly larger so there is good ventilation around the frame and the wood can move and dry as it pleases. The entire window is also quite protected under the roof.
@Arthur-Silva4 жыл бұрын
Long live the metric system! ✊
@TJSWOODWORKINGSHOP8 жыл бұрын
Hey my friend great job bro :)
@FinnCrafted8 жыл бұрын
Thanks TJ! :)
@TJSWOODWORKINGSHOP8 жыл бұрын
No problem bro I like it my friend :)
@photova90167 жыл бұрын
Молодец чувак !!! Шикарно !!!
@FinnCrafted7 жыл бұрын
Thank you!
@Mistak3.7 жыл бұрын
Hei, nice video and may i ask how you make money of these thing like do u sell them at a shop? Or how cause i'd like some day to do something like this but idk how to make money off it Keep up the good work! 👌
@FinnCrafted7 жыл бұрын
I currently make no other money than what little revenue comes from ads on my videos. Also selling a few projects and the odd commissioned piece here and there so far. Many of these things I would probably do anyway as normal maintenance at the homestead. A shop and a business of your own would be your best bet (if you live in a country where there actually is a market for these kind of things).
@Hellsong897 жыл бұрын
Listojen reunoihin olisin kyllä ajanut vesi tippa viisteet, mutta muutoin erittäin asiallinen rakennelma. Nyt taitaa ladossakin jotain nähdä:)
@FinnCrafted7 жыл бұрын
Kävi kyllä mielessä se tippaviiste mutta tämä on aika suojassa räystään alla. Oli itekin pakko todeta että tämä on huomattavasti valoisampi kuin se käpytikan tekemä reikä päädyssä :D
@timwhite92558 жыл бұрын
Good job but you got lucky cutting that old glass.
@malenekoldborg8 жыл бұрын
how do you mean lucky? i hear people say that old glass is hard to cut. But i have cut glass for a small greenhouse and only ruined 1
@timwhite92558 жыл бұрын
malene k-kreativ tingmager I can only speak for myself but i have always had bad luck cutting old glass, and by old glass i mean glass that is at least 100 years old.
@FinnCrafted8 жыл бұрын
I suspect it could be due to glass actually having a small amount of plasticity because of time and gravity. The bottom part of the glass may be thicker than the top. I have not seen this personally, only heard about it.