Firmware for ASIC S9. 20 Th/s.

[@woltervrieling]

Yea you are the best. Thnx man!

[@BiXBiT_Global]

you're welcome

[@imdawolfman2698]

Blagodaria for the walk-through, it was spooky having so many parameters to modify without docs. I hope you have a forum or other Q&A on your website, I'll probably need it. I have a new S9 I'm going to submerge this week..

[@BiXBiT_Global]

You can ask any quastions on our forum - bixbit.tech/ in our Telegram chat - t.me/Bixbit_official_en Or right here in the comments

[@JohnOfAllTrades27]

So far my S9i is very inconsistent with this firmware. It reboots every few minutes saying temp over 80 even on the lowest 10th preset but the temp values show in the 60s on miner status. I also had to disable fan check because it shows fan failure. I might have to go back to stock firmware with all these weird bugs. My stock firmware runs fine, no fan or temp errors.

[@BiXBiT_Global]

Please post your issue at bixbit.tech in the appropriate hardware thread. You will definitely be helped!

[@asifalikhan8677]

Chip on 100% from factory hash rate means 14 + 14 = 28 th but firmware go up to 20 ~22 th means 8 th will be utilize by Bixbit ... Is it a fee of using bixbit🤔

[@BiXBiT_Global]

Acceleration goes from 13.5 to 20-22 Th / s. Unfortunately 28 is not real. Check your details

[@asifalikhan8677]

@@BiXBiT_Global ohhh sorry 👍🏼

[@crisalidaoquendo336]

Hola, el mismo firmware desactiva los ventiladores para usar la inmersión, no se necesita comprar los emuladores para el ventilador.?

[@BiXBiT_Global]

Hola, sí, hay un modo líquido en el firmware. Selecciónelo y la prueba del ventilador se desactivará.

[@crisalidaoquendo336]

@@BiXBiT_Global gracias por responder, este firmware permite usar 6 hashboard con la controladora s9.?

[@BiXBiT_Global]

@@crisalidaoquendo336 Este es solo para ASIC estándar para 3 tableros hash

[@mkagangirgin]

Hi, is it possible to use it with S9 SE? I have a S9 SE, I can not use one hashboard because of temprature sensor on it? I guess I can control it by software right?

[@BiXBiT_Global]

Hi, the firmware is not suitable for S9 SE. For older models only.

[@Sony-wq4hs]

how can I know the asic temperature of a given depth images

[@BiXBiT_Global]

Not very clear, write in more detail

[@matspahlman5468]

Can this firmware be used on a S9 Hydro? Does the overclocking also increase the electricity consumption, increased frequency also damands more power?

[@BiXBiT_Global]

For S9 hydro, the firmware is not suitable. Consumption rises when overclocked

[@pattimichelle3038]

Hi: I bought a miner with this software and need to re-flash back to standard Antminer firmware, but I always receive "request failed with status code 500" - how can I remove this firmware?

[@BiXBiT_Global]

Hi, Request 500 is consequence of a virus. First try to reveal and heal it with an anti-virus feature in our firmware. If it doesn't work, try to re-flash back with SD card with this tool bixbit.io/assets/firmware/Recovery_S9_3.8.6.bixbit.img

[@logisticainformacion3044]

that firmware have the option to unlock ssh service for antminer s9k note: does antminer s9k "ctrl_c43" work properly with it?

[@BiXBiT_Global]

The firmware for this model is still under development

[@TBlineGarage]

When I do upgrade, My antminer s9 said:Cannot Find Signature!!! What now?

[@BiXBiT_Global]

Write about your problem on our forum, you will definitely be helped bixbit.tech/forum/topic/11-firmware-for-asic-bitmain-s9-s9i-s9j-t9/

[@summershadow4774]

down volts 650 w = 14 th / s is that correct?

[@BiXBiT_Global]

Yes

[@mingscustoms]

It is not correct the 650 refers to chip speed not wattage

[@ylattuf]

buenisimo viejo, pero como hago si tengo un chip malo en la tarjeta? puedo apagar su frecuencia?? por ejemplo pasar del chip 50 al 51??

[@BiXBiT_Global]

Puedes bajar la frecuencia en él

[@prashantkachhawaha3707]

My antminer s9j is 2019 firmware ....so i need to flash from sd card far as i know 1st i need to flash t9+ sd card tool/firmware thn install from GUI bixbit is that right ??....

[@BiXBiT_Global]

You can follow the instructions on our forum bixbit.tech/forum/topic/11-firmware-for-asic-bitmain-s9-s9i-s9j-t9.

[@prashantkachhawaha3707]

@@BiXBiT_Global one more thing that auto tuning process is 1 time thing or it's on every reboot...because some time in my town electricity out for half an hour in one day 2 -3 times...so it's happened 1 time for each miner or every reboot?

[@BiXBiT_Global]

@@prashantkachhawaha3707 Settings are saved

[@bazicbass2260]

hello, i have a problem flashing any S9 firmware. When i try flashing it. My S9 start blinking red light. is it normal? I then rebooted it and the firmware is still the old one. Please help. I really would like to use your firmware. My S9 currently is running at 13.9T @1700W..... The wattage is quite high..... Thank you

[@BiXBiT_Global]

Hello, write about your problem on our forum in the appropriate thread for your equipment bixbit.tech/forum/forum/23-bitmain/ There you will definitely be helped

[@Diderick25]

When I have loaded it wants my password and username but it does not take the usual.

[@BiXBiT_Global]

Please describe the problem on bixbit.tech in the appropriate hardware thread

[@adrianbricenoespinoza9271]

saludos amigo, estoy intentando actualizar el firmware a una antminer S9 y me dice "Cannot Find Signature!!! me puedes ayudar con eso, por favor?

[@BiXBiT_Global]

Saludos, describa su problema en nuestro foro en la sucursal correspondiente en el equipo bixbit.tech/forum/forum/23-bitmain/ y usted estará emascado

[@brinceboali2524]

whate the power supply watt for 20th/s

[@BiXBiT_Global]

Best at least 2,400 W

[@juanparis9534]

how to upgrade firmware custom without SD Card ?

[@BiXBiT_Global]

Write to our forum in the appropriate thread for your equipment, you will definitely be helped bixbit.tech/forum/forum/23-bitmain/

[@leonardojosehabalianghazal2241]

Una pregunta, se puede minar si algún chip está defectuoso?

[@BiXBiT_Global]

Todo depende de lo mal que esté. Si tiene un problema, puede describirlo en el foro en el hilo de hardware correspondiente bixbit.tech

[@ylattuf]

viejo resolviste esa duda?? yo escribi lo mismo y no me respondieron jajaja

[@876pips]

Does this work on s9j ?

[@BiXBiT_Global]

Oh sure

[@matyadi]

For x3?

[@BiXBiT_Global]

Yes

[@logisticainformacion3044]

i am new in this but i want make bussiness ....

[@BiXBiT_Global]

Write us your vision at [e-mail] and we will definitely help you in the implementation of your project

[@brinceboali2524]

is work in 2021 !!

[@BiXBiT_Global]

Yes, everything works fine, even now

[@sidikmuhammad3828]

Fake video,, voice not same with mouth 🤣🤣🤣🤣🤣

[@BiXBiT_Global]

There is nothing fake, the translation is made for your own convenience, in order to convey all the information on the video

[@MC2738]

As an ASIC owner I can confirm that this video is legit and NOT fake

[@toxico2699]

They are the best