First Engraved Tumblers on XTool M1 Laser

Let's Unbox the Xtool M1 Craft Laser Engraver | Silhouette School Blog 😍 In this Xtool M1 unboxing video you'll see what comes with the desktop laser engraver and cutting machine👇 Shop Exclusive XTool M1 Bundles: shrsl.com/45dol MORE INFO and IMPORTANT LINKS!👇
Looking for more XTool M1 and P2 Laser videos and tutorials? You can find them all here 👉 • XTool, Glowforge & Las...
🎥 Full Getting Started with xTool M1 Playlist: • XTool M1 Laser Engrave...
⭐️⭐️ Recommended XTool M1 Bundles for Beginners (Get What You Need, Skip What You Don’t) ⭐️⭐️
😍 XTool M1 Laser Engraver with Air Assist and Filter (Recommended if you are NOT venting outside): shrsl.com/45doy
🔥 XTool M1 Laser Engraver with Air Assist (Recommended if you are venting outside): shrsl.com/45doz
🍺 XTool M1 Laser Engraver with Air Assist + Rotary with Riser Base (Recommended if you are planning to engrave tumblers): shrsl.com/45dp1
📦 The base Xtool M1 Laser Engraver and Cutter includes the following in the box:
10w Hybrid Laser Engraver and Cutting Machine
Xtool Creative Space Software
Power Cords
USB
Cutting Mat
Blades
Blade Carriage
Small Pack of Sample Materials
Filter Tubing and Connection
Triangle Prisms
Add Ons and Accessories for XTool M1:
⭐️ Rotary Attachment for XTool M1: shrsl.com/457hl
⭐️ Air Assist: shrsl.com/45964 (LEARN MORE: • XTool M1 Air Assist Re... )
⭐️ Riser & Honeycomb Tray: shrsl.com/45969 (Recommended to use with Rotary)
⭐️ Air Filter / Smoke Purifier: shrsl.com/4596a
⭐️ Fire Safety Kit: shrsl.com/45h3l
⭐️ Premium Material Pack (LEARN MORE: • XTool M1 Review & Unbo... )
✅ Best Commercial Use Laser Designs and Images for xTool: sofontsy.com/p...
What's Covered In this Video?
🎥 Looking for more EDITED videos from start to finish for your craft hobby or small handmade business? 🎥 How about 1:1 help? WE HAVE THAT TOO at Silhouette U!! 👇 Start Today
silhouetteu.co...
🎥 SUBSCRIBE TO OUR KZbin CHANNEL! It really helps us bring you more craft tutorials!! 👉 / @silhouetteschool
#xtool #xtoolm1 #bestcraftlaserengrave #laserr #xtoolM1unboxing #craftlaserengrver #silhouetteschool #freesilhouettevideos #freesilhouettetutorials #cameo4videos #craftvideos #howto #cricut #silhouettecameo #sublimation #heatpress #silhouettebusiness

[@peggymarsh6569]

I did my first today & it was a success!!! Of coarse I am finding your video now. Thanks so much!!!! You are the best

[@SilhouetteSchool]

You are so welcome!

[@lauramaas7490]

I finally broke down and did one and I love it! Now onto harder ones! thanks for the tutorial!

[@SilhouetteSchool]

You are so welcome!

[@Lisa-oh2vl]

Thank you so much for this! I’ve spent HOURS trying to figure out what the best laser cutter/engraver is for tumblers and cups

[@SilhouetteSchool]

Glad I could help!

[@kehsauce1292]

FYI if you want to get the soot really cleaned off on the finished work, Dawn Power Wash works wonders.

[@robindismuke3947]

What’s the largest size tumbler you can engrave with this machine? Will it do 40oz tumblers?

[@amanda120082008]

Do you have a video on engraving a full wrap on a stanley with the M1

[@SilhouetteSchool]

I haven't released it yet

[@marissarehder8668]

Would love to see it!

[@Pa_Dave]

Doesn't the green line have an "engraving" at that spot the whole time? i did mine like that and when I frame, it seems to do just that

[@thesaltedseahorse464]

I didn't' get the tape measure that has the end to identify what I need to use where can I find that?

[@brunajean-louis]

I love your videos and how you explain everything. I have a question, can I just turn the air assist off or do I really need to disconnect?? Thank you!!

[@SilhouetteSchool]

You can just turn it off and on. If you don't want to keep it in position you can set the cap part into the holder on the side of the laser module

[@ginamariegarcia9461]

Thank you so much! I have seen other videos and they put like tape before and after where the design will go. I see you didn't. Can you explain?

[@SilhouetteSchool]

Yes b/c as I mentioned there's no logo on this cup so I don't need to try to center the engraved design off anything. The reason for the tape is placement, but in this case the placement really doesn't matter.

[@monicakalua4604]

Hi there! I have the same machine and have been trying to engrave a yeti tumbler but for some reason my designs aren’t coming out . Do you have suggestions

[@SilhouetteSchool]

Is it in focus and do you have enough power?

[@angiej4970]

Hi Melissa, I am following all your videos as I set up and learning about my m1. Mi ritarobtool did not bring the measuring tape, do you know if there is an svg I can print and use please?

[@SilhouetteSchool]

i'm not sure about an SVG but I would reach out to xTool and tell them you have a part missing and hopefully they will send it.

[@erinjohnson4372]

Does this machine need to be vented by a window? I’m in a hot climate and I really can’t be opening windows right now so I’m wondering what people do for that.

[@uniquenfabulous7552]

There is a smoke purifier attachment that can be purchased.

[@Cmedina10]

Can you do a video cutting vinyl do I have to remove the riser & honey comb to work with print and cut & vinyl??

[@SilhouetteSchool]

When you cut with the blade you want to use the cutting mat.

[@kiaravasquez6226]

Hello!! Can you make videos with the p2 please! ❤️ love how easy you make everything

[@SilhouetteSchool]

Just gonna leave this right here 😉 kzbin.info/aero/PLT9hB3BOKb_gpngQmN2r035Q0FC3Lqgkx

[@melissa00720]

If it’s not going threw do I need more power?

[@SilhouetteSchool]

I'm not sure I understand your question. What is not going through?

[@poorva29]

Where is the link to buy the tumblers

[@SilhouetteSchool]

These tumblers I just picked up at Target but I usually get tumblers at Save a Cup. Here's a link www.saveacup.com/#a_aid=silhouetteschool&a_bid=64519456

[@kc5ohj]

Also, I can't find the video on connecting to wi-fi. Thanks. :)

[@SilhouetteSchool]

Hey there! It's coming soon!

[@tonyablackwell7295]

My rotary didn’t come with the end piece is it sold separately

[@SilhouetteSchool]

I believe they are supposed to come together.

[@thecrafthubacademy]

Hi, I’m having issues with my portrait 3, tool is awaiting connection, not sure what to do

[@SilhouetteSchool]

Hey there, I’d make sure your software and firmware are up to date.

[@kc5ohj]

Do you leave your riser in place all the time even when you're not using the rotary attachment?

[@SilhouetteSchool]

Yes

[@FaithPrayerLove]

My rotary didn’t come with the clear ruler & doesn’t show it in the manual either. Is this a mistake?

[@SilhouetteSchool]

The clear ruler came with the M1, not the rotary.

[@CheBesDesignBox]

The clear ruler comes with the riser base/ honeycomb. If you search you can find the Xtool project for the focus adjustment ruler to make yourself.

[@Lisa-oh2vl]

Is there a compatible air filter system for this?

[@SilhouetteSchool]

Yes amzn.to/47aSuIS

[@fabiolarichards4506]

Have you done golf balls?

[@SilhouetteSchool]

I haven’t yet!

[@noemiserrano7755]

Can the M1 engrave on clear acrylic sheets?

[@SilhouetteSchool]

No it can not.

[@uniquenfabulous7552]

There are other KZbin videos that show how you can engrave on clear acrylic with this machine. Only engrave, it will not cut.

[@user-gu1lh5bc2l]

Can sublimation/sublimated tumblers be engraved?

[@SilhouetteSchool]

I haven't tried it..but you certainly could

[@user-gu1lh5bc2l]

@@SilhouetteSchool would love to see a tutorial video of a 20oz =)

[@ceciliamagana6278]

cant wait for that one! you make everything so easy! @@SilhouetteSchool

[@fabiolarichards4506]

1 pm, Pacific time?

[@suethatcher2957]

1 pm eastern time, 10 am Pacific