First Gen CUMMINS quest for more power!!! NEW TURBO!!!!

[@dylanbland3716]

I can't believe you only have 105k subs (not that thats not a lot).. but the quality of content and as genuine of you dude you seem to be, you should have way more!

[@so6173]

Dennyt afc delete really wakes up the old ve pump. Did that to my truck and it feels great went from 23 psi to 32 psi on a h1c with 21cm exhaust housing. egts get a little toasty on the top end but very controllable. Love watching you build the 1st gen keep it up!!!

[@ConsumeTheDark]

s o the afc deletes are more for pulling. They give you full fuel all the time. Kills spoil up.

[@TheTacticalGinger]

Hmm small charger a 363 to feed a bigger one 🤔 cough cough

[@levitaylor9148]

I’m running a s363/68/14 on my 2nd gen freaking love it. Perfect primary for a set of compounds!!!!

[@wildcoyote34]

that first gen sounds really good ,,,i am a big fan of cummins power ,, even though i am a GMC lover and have been a chevy guy since i started driving in 1990 ,,i'm a big fan of diesel conversions and have done several over the years ,,my most recent cummins conversion is a 1988 ford ranger that i dropped a 4BT into ,,motor came from a bread truck that i bought for parts I've also got 2 farmall tractors with 4BT conversions ,,super H and super M I've discovered another new thing that worked with my GAS truck too , and that's a Blaylock Switchblade VGT turbocharger I have one that i just installed on my F800 COE truck this started out as a barn find that i gave just $500 for the truck is a 1974 ford Cab over 800 series truck tractor ,,this is a short truck that is no longer than your first gen dodge cummins ,, guy sold it cause he couldn't get it to move kinda funny ,,dude got no idea what AIR BRAKES are ,,, i knew what was wrong the instant i tipped the cab up NO BELTS on the Air compressor ,,no problem i just plumbed a portable gas powered air compressor to the tank , poof now the brakes work and i drove it home ,, this was someone's hotrod project 20 years ago ,,and he had installed a Garett T4 turbo with a 66mm inlet housing ,,not near big enough for a 478 stroker adding the 88mm blaylock VGT made it a whole new beast , it spools FAST and makes that big block ford go like a scalded dog I just did a dyno pull with it on march 20th and it's putting 595HP at 5500 rpm and 680LB/ft to the rear wheels at 2800 the VGT gives it an odd torque curve,,,but it does awesome in a 1/4 mile 12.8 sec 1/4 mile pretty good for a 44 year old truck with a 9 speed trans and 455 gears,,, and a burnout creates a huge smoke show from 4x 12R-24.5 tires ,, sadly power braking is not possible cause the brakes are too strong ,Air brakes after all

[@SouthernSpirit4Life]

Love your channel just subscribed... I am currently building my 07 cummins 5.9.. Your channel have helped me out in my build.. Thank you for sharing your videos

[@krazynelson]

I see compounds in the 12 valves future

[@tsimmons1974ts]

Grrrrreat stuff, fun ,fun,fun..... those first gens sound great !!!!!!

[@nikherren3254]

I hope you got that turbo so when you do the p pump you go twins !!

[@ryankosik18]

Those 420s are so f#@%ing awesome on the 1st gen. Inspiring!!

[@skiskiinurface]

Lol, anyone else catch the way he said “we need more BOOOSST” like Adam LZ when he makes fun of his buddy BigBoost? Love the vids man

[@jasontruman1215]

“The guy” from hungry diesel must be Eric, he’s a great guy!!!! I get all my parts from him

[@anthonymontoya8039]

5th!!! I love you Greg A. and all you do! Keep up the great work and thanks for providing us with great entertaining content! Much love from out here in New Mexico! SQUAD!!!

[@evolati12]

I seriously thought I did hear “wiper linkwage!!!!!! Thanks @greasingcrowsracing for the confirmation!!!! Almost as hilarious as the “wiper linkwage” it’s self!!!!!

[@WillGunn01]

More fuel!😁 More boost!😁 More Power!😁 You have to love all three but without an engine fan...equals a blown headgasket or a rod playing peak-a-boo...!

[@KRSappalousa]

Hey Greg! love the channel - I HAVE A BIG FAVOR... CAN YOU FIND OUT WHAT TYPE OF BACK BRACE JOHN WEARs? - I am all F'd up and need a full style brace like his-Thanks in advance. I own a nice 1993 w250 club cab and is why I ended up here!! Go first gens!!!

[@paulhansen774]

My guess is the 363 is gonna be paired with a 468 Greg "stole" from fleece

[@JRL1987]

Paul hansen that would be a terrible compound setup

[@seanfritz1355]

Got to love gen 1s my wipers break linkage all the time.

[@ryanhyde6237]

If the needle is going to the 6'oclock on the gauge it a wiring problem. i think the 6'ocolck is a bad ground

[@tomdebaise353]

Well I guess now we know it’s eventually getting compounds.

[@bluecollarballers7315]

Top side creeper needs adjustments for shorter trucks lol.

[@brendaleetv]

Do you have limo tint in the front windshield?

[@davidconrad8045]

Hey Greg, I’ve been watching your videos for awhile now, and I’m a proud owner of 2007 MegaCab 5.9. I’ve replaced injectors, crossover tubs, track bar etc. and I’ve been meaning to ask you what’s the BEST WAY to clean our engine bay without potentially damaging any electrical components and/or risk getting water into the engine? Thanks much man. I’m about to place a order for some Wrench Works gear. Keep up the great work.

[@smcox1991]

That was the slowest looking 100mph I've ever seen 🤔

[@cory_97]

100 kph?

[@thenutdriver9685]

smcox1991 you beet me to saying that lol looked like 50

[@markbeech3455]

Maybe it was 100 kilometres an hour, ( 60 mph )

[@philandgregshow8486]

I love the 1st gen! Yeah Buddy!!!

[@CoverManMan]

Ah yes the ole’ wiper linquage 😂😂😂

[@purpskipiff6296]

KZbin call out 3rd annual!!! Dirtymax Jack called you out bub!!! Let's get it!!!!

[@rileyholt8200]

Love the video Greg you should make a vid with Bruce Wilson sometime!!

[@dodgeman4046]

I need that ve pump when you swap it my power screw is stripped in the pump

[@thejunkshop5022]

I think 1st dyno pull 400hp and then i think compund chargers are next

[@BlueFordGuy]

My coworkers isspro boost gauge does the same thing as your back pressure gauge

[@jakelovejoy1401]

Compounds in the future???

[@fc3sboy1]

We run the 363 as a manifold charger with a 475 compound with a p7100. Fucker hits like a frieght train at 1800 rpm

[@kornfedkustoms1548]

So ive been shopping for a 1st gen to build up and lower for a street truck, will end up building some serious power. Curious whats your opinion on 2wd vs 4wd do you think it would make a difference as in a quicker truck being 4wd or not worth the extra parts to break and weight? Also i doubt i could lower it as much being 4wd. I see alot of decent 2wd trucks for sale tho

[@jasonradle7076]

Hey brother I know this is a 1st Gen video, but wanted to see what ya thought about a fleece s463 2nd gen swap on my 07 5.9 with 6 speed, i tow my 28ft gooseneck and have stock injectors and cp3 with efi live and other bolt ons do you think it will work for towing? normally 10-16k lbs is what I pull. I don't really wanna go twins and like the 2nd gen swap thanks in advance

[@diamondautomotive7138]

Love first gen content

[@jeremyfowler7505]

Eric @ THD is the man. Great guy and sells anything you need for a 1st gen. How much more boost did you get out of your turbo once you ground down your fuel pin?

[@_greg_a]

Still about 35ish psi

[@jeremyfowler7505]

GREG_ALBERALLA so was it worth grinding the pin? Im putting 5x13 vco injectors on mine with a 62/65/14 setup. Hoping to get more power and towing capabilities out of my old girl. Thanks for the videos bro love your videos.

[@_greg_a]

Thanks man! I would say my stg 2 pin was good for most people just the way it was, were gonna try and squeeze every little HP we can out of her, so I'm hoping with the longer screw they work well together.

[@jeremyfowler7505]

GREG_ALBERALLA im running the THD fuel pin and it feels good right now. I have my stock intercooled screw ran all the way in. Going to buy a longer screw and turn it up more if I need to. Im really curious to see your power numbers and your build sheet to date before the new turbo install.

[@_greg_a]

That's the plan!!

[@willierepairone5389]

Did you change the governor Springs on this truck...?

[@ConsumeTheDark]

Willie Hall both trucks have 3800 gove springs

[@eriklopez39]

What size tires are you running?

[@ToplessCats]

What headlight bulbs are your running?

[@willbissonnette189]

What kind of headlights are you running?

[@samjacobs4769]

Greg you should make a nice vlog the day mini greg A is being born

[@samjacobs4769]

the wiper flew off😂😂

[@redneckbig11]

Awesome awesome video Greg A, man both your 1st gen and Tommy’s sound wicked as hell lol, I never new they could run like that lol.

[@ConsumeTheDark]

Hunter Prowse all about the tuning brother

[@cory_97]

turbo was chosen because of compounds!?

[@senditandliveit9536]

What do you think the mpgs are on that golden oldy? I have no smarts with diesel. Thanks in advanced love your projects🤠

[@ConsumeTheDark]

Send it and live it I get about 20 mpgs

[@senditandliveit9536]

Greasing Crows Racing wow! Im looking in to trading my 1996 toyota tacoma for my dads buddys dodge dually turbo diesle its around the same year as your oldy was ify because I had no idea on the mpgs the 12 valves could get thats very impressive!

[@ConsumeTheDark]

Send it and live it yea I was super surprised on it when I calculated it. But its spot on

[@heavychevy162]

I’m thinking compounds in the first gen’s future

[@gmcman355crazy]

Just p pump the damn thing and new turbo and be done with it

[@Commonrailkiller]

Amen your beating a dead horse with a ve pump still in there

[@gmcman355crazy]

minterfab who cares lol it's still a first gen . And most people wouldn't even realize the difference unless u know what your looking at

[@OfficialEPA]

How can I tell if my truck is getting to much/to little fuel or if I have to much/to little boost?

[@ConsumeTheDark]

LEMONADE STAND if youre getting way too much smoke at low rpm and low boost its too much fuel down low. If yiur not getting enough fuel up high it wont have any smoke at all. You should have a good haze at wide open

[@Quazimo]

ready to see the 05 run

[@bradyanderson201]

When will you be Ppumping the dang first gen!!

[@kylebuchmann8585]

Thanks for the vlog

[@ohiodipper9877]

I like that in cab view

[@nickolasfeliciano2013]

You should p-pump the 1st gen with the new turbo

[@cristiansaavedra7703]

She hits

[@duramax1647]

Love the channel keep it up

[@dwight072]

Compound time !!

[@joshkaiser7750]

What turbo u runnin

[@Atizzle121310]

Random but I pressure washed my engine (I know dumb) and now it won’t start. I have an 03 dodge 2500 5.9 cummins. I’m getting a bunch of error codes. It turns on for 2 seconds then turns right off. I was wondering what you guys think the problem is and how can I fix it? Thanks

[@turtle2448thomas]

JokerAQ13 Just unplug the battery and let it sit for a full 24 hours. Let all of the water evaporate and try again. Hopefully you didn't already mess something up.

[@kashanilla88]

JokerAQ13 blow dry main electric connections on the ecm and crank sensor

[@idevicehelper16]

Dry it with some paper towels

[@tomjacobs6602]

Check all your connections, and just like turtle2448thomas said unplug the battery and let the water dry up. Hope things work out. Maybe next time just use a little degreaser.

[@SSYukulu]

JokerAQ13 Pressure washing the engine isn't stupid. You just have to be careful what you spray and not spray it for to long. And properly drying everything off. I work at a detail shop where we pressure wash new and old engine bays everyday. Never an issue. Just get access to an air gun or leaf blower and blow dry it all off. You should be fine!

[@360ModsandHacks]

That window tint tho

[@georgetaylor5400]

I can't remember what the offset on them wheels on the first gen

[@jeremyfowler7505]

George Taylor -44 with spacers

[@mattra5224]

George Taylor -40 not -44 and only spacers in the front because the rear end is is wider

[@jeremyfowler7505]

Maybe I was thinking about the gear wheels.

[@KyleKeierleber]

Greg the fuckin fire through the hood stack does NOT mean it needs more fuel 😂😂😂

[@Nicksterzone]

That's pretty much the turbo I have on my 2nd gen

[@austinsvids1]

Looks like the 1st Gen is getting compounds

[@tomjacobs6602]

Damn the first gen is sexy!!! Can't wait to see it all tuned up!!

[@mopartshemi]

YOU squirrel!!! get back to the 05!!

[@bennygarcia9710]

New turbo doesn't show up until 15:21.

[@moparman2500]

P-pump the damn thing already!!!! I'll bet good money you got a s363 so you could add a bigger charger later for a compound setup

[@blackopsaddiction9393]

Twin turbo??

[@Ryan_Driedger]

Take some god damn preload off the damn pin so it actually spools

[@ConsumeTheDark]

Ryan Driedger it spools like lightening. Just looks slow

[@paulmach5]

It’s already would all the way down in the older vid

[@ConsumeTheDark]

paulmach5 nah its all the way up. I actually turned it 1 turn down this time just to try to get some more top and fuel cause his boost isn't as high as it should be. But after the next tune with the new screw shes gonna be roudy!

[@Ryan_Driedger]

From what I remember he backed the preload all the way out so it doesn't get fuel until higher boost. I may have missed something but I have 5x18s and a single and mine lights way faster runs under 1300*

[@ConsumeTheDark]

Ryan Driedger you have to remember his charger is a wacky size. And the starwheel being all the way up adds preload to let it fuel a little slower so it doesnt flood out the turbo with fuel before it lights.

[@Lee01Mr]

How's the Greg A eye?

[@_greg_a]

Doing well! Thanks for asking!

[@leeelmer3404]

You need to bi turbo this so it spools up faster

[@ryanparker935]

Streetspeed717 and them called you out bud you should make a video on it Hahahah hopefully your drag truck is done by then

[@kirk7001]

Ayyy sounding good👌🏾

[@hotrod8130]

That turbski sure don't sound happy

[@abcdefgWakaWaka]

BADASSS!!!!!!!

[@davidsim5123]

I have a Lund visor that will for your 1st gen greg... free for you if your interested.

[@jeremyfowler7505]

David Sim. If he doesnt want it I am interested.

[@_greg_a]

Never been a visor kinda guy my friend but I do greatly appreciate the offer!!

[@RobertKohut]

Nice!!

[@abcdefgWakaWaka]

Compound😏

[@backwoodzcustomz1549]

My man, turkey hill diet tea. I now have even more respect for you.

[@_greg_a]

LOVE Turkey Hill, Diet well cuz #racetruck lol

[@backwoodzcustomz1549]

GREG_ALBERALLA working on my hemi wk tonight I had to settle for diet icy tea cause it was $.75 cheaper lol

[@clifftonarnold6989]

I smell compounds coming. Lol

[@Ajallday1010]

If you have 2 functioning turbos would compound turboing the first gen be an option?

[@certifiedsteppa6290]

I smell compound !!!!

[@sethnielsen5546]

Put the new turbo and p-pump in smh

[@sleezy3131]

what are your thoughts on giving me the old turbo i will make you a pbj sandwich

[@mike2191958]

Don’t know what you do for a job I just know your spending more than most make in a year three trucks two new fleece motors and a back half that ain’t cheap boys always someone that’ll out money you

[@rileymcfadden6382]

Is it just me or is the audio timing off

[@garretteddy1543]

1:56 my god that frame rail is bad

[@808monster1]

No compound turbo? Lol

[@prestonblaineroddam7986]

Y don't u get a 1st gen ford explorer and build it up bcz it would probably make alot of ppl happy but I just hope u do this bcz it would really put a smile on my face but ik you'll probably not but it's worth a try to ask

[@supbro2145]

preston roddam hell yea

[@5.7chevy37]

4bt swaped ford exploder

[@chevygang5226]

Just do the freaking p pump already

[@RobertKohut]

Can there be any more ads???

[@noahmeckley6986]

You need grill inserts

[@brentschiefer3017]

4 ads? Little money hungry aren’t ya

[@tomprice2407]

Rolling coal not cool anymore

[@24vcummins99]

First like and comment 🤙🏻

[@npp3559]

Omg thoes wheels are embarrassing

[@laneodell1623]

First