First Hook in the Pull Truck was a MAJOR SUCCESSES! We learned A LOT!

[@Braydenscates]

For the haters 😂

[@G_Slicks2.0]

Fax

[@jamiesuejeffery]

My uncle was killed in a Super Modified race car. My aunt has made an amazing decision to marry a super cool person... Except for F-1 and NASCAR, I believe that racing is dumb. Those two actually make our lives better (a long path, but better).

[@jamiesuejeffery]

@George There is a whole lot of back story. He was an a*hole. I am talking cheating on my aunt, cheating on his girlfriend (who fathered his two children). Before my teenage years, he was cool. Then I learned a lot. He was no saint. He was a Pr*ck.

[@KA-om9oz]

@@jamiesuejeffery people die every minute from something..what's your point

[@jamiesuejeffery]

@@KA-om9oz I am going to go with you being a complete A-hole, cheating on your partner, and giving a big F* off to your community. Have fun living alone and sad. Bye!

[@jenniferwilson954]

So glad we made it early enough to see you pull the big truck! So proud of you.❤ Love Mom 🥰😘

[@dodge33445]

Hey Momma Bruce! Super cool you were there to support him!!

[@adamorsini4585]

The truck looked great on the pull Bruce made.

[@econrey]

Bruce better pin this one 😂

[@_hotrod_]

HEYY momma Wilson!!! Bruce is a hell of hard worker and I’ve been a long time follower of Bruce from years ago, and it’s so good to see him back on top after all he has been through❤️❤️❤️❤️

[@colesteven1123]

Mama Wilson!!! ❤️

[@blueonblack3971]

Can't do anything but get better from here. That was a good pull for the first time in the truck. Looking forward to see where you take it from here

[@DVFT]

Awesome video man, saw this video in my feed and decided to stop by! Keep up the great work.

[@HJZ75driver]

Clean run Bruce. Not overfuelling (no black smoke), No popping or banging. Didnt spin. 👌Spot on

[@mr-js9is]

For a first pull it looked clean from my house! Only gets better from here 🇺🇸

[@SMGPERFORMANCE16]

That is a dead cyl for sure, you can hear it under full power. Get that right and youll be set

[@Oldskool4321]

Could be an injector problem

[@nate4036]

It does sound like one isn’t fueling 100%

[@maxklosterman4635]

Sled pulling is my favorite sport! Cant wait to see this thing rip at more events!!!

[@zillxionairetura2255]

i cant wait to see more modifications done to this truck.. engine specific.. cant wait to hear a cleaner monster idle

[@johnny22single99]

ABSOLUTELY-----> OUTSTANDING 🙂

[@BudgetGroundPounder]

That jet powered tractor actually wasn't even started. That sound was just the electric starter motor that gets everything spinning, but it never actually fired off. Or you would know, it would start getting really loud & some white smoke coming out until its fulling fired up & burning all the fuel.

[@carriebrumley8926]

Your moms view was great!! Hey Ryan got the shot lol I like how it sounds like a Model A Ford but rips down the track Great video!!

[@Romans--bo7br]

Congrats on your first pull. I was involved in it for years myself, in the Super Semi classes of the NTPA & East Coast Pullers Assoc. Just FYI, with regards to your referring to the "Jet" powered tractors...they're Not "jet" engines.... they are Turboshaft engines, as used in Helicopters, Turbo-Prop Aircraft, Turbine powered gensets, Ships, etc., though, the majority are from helicopters (many are military), and the Lycoming T-58 is very popular. Turbshaft engines power things by shaft hp & torque, Not by thrust, as Jet Engines do. Basically both the same, but the Turboshaft engines generally only have anywhere from 1 to 5+/- stages of compressor stages which are made up of a Rotor & and a Stator which partially converts high velocity into high pressure with each successive stage (depending on size & desired amount of SHP / Shaft HP), whereas modern Turbojet (military) and Turbofan (military & commercial) can have anywhere from 10 to 15, compressor stages to build high thrust, plus afterburners for additional thrust capabilities for military aircraft. There's actually Two variants with regards to how internal flow pressurization is produced, 1) is a Centrifugal Type, and 2) is of the Axial flow type.... but that's a whole other topic. Enjoy your sled puller... it's "addictive"!!

[@ScottHesser574]

“Corn Patch Cadillac” is a fellow farmer here in Indiana 😎 hell of a guy “Travis Smith” and hell of a TRATTER!

[@ptshyu2]

Glad you listened to all those comments and switched the harness back around she’s a ripper now

[@GeenIdee2]

This brings back memories. I used to be in a truck pulling team in the netherlands. These are all single axle's and we'd try to hang the weights in such way to balance the truck that is just slightly off the ground with the front wheels. Also, with turbo way to big we had to slip the clutch in order to start building boost. Years ago we already had custom multi-plate clutches to handle the abuse. Right after I left they came to the point where the sled wasn't heavy enough anymore lol.

[@FreightlinerFLD]

Thank God for safety shutoffs .those mini rods are dragsters with knob tires .

[@scottfoster9690]

Right on bruce that was a good first pull.

[@Trenton-om9qs]

I tapped on this notification so fast. I am loving the truck/tractor pulling content and for a first pass the truck did pretty well.

[@Anonymous..VQ3.5Lg35]

Im from Alberta, only seen the big engines pull once! Wish I could see more!

[@MidwestToolReview]

Excellent work!! Been following you since the beginning, so this feels like a "W" for the loyal subs as well!!!!

[@dennissastini3312]

Darn right long way from working on cabovers in the backyard

[@MidwestToolReview]

@@dennissastini3312 yessir!!!! Lol

[@johnscarbrough2926]

The four-wheel-drive truck that you just bought and put a transmission and that’s got all the different welding spots that are fatigued and broke strip it down and make a pulling truck out of it then you’ll have both a semi pulling truck and a 4 x 4 pulling truck to as well as you can find a good tractor body to make a pulling tractor that covers all three just about

[@shawnkeenan2576]

Great job. Glad I got to meet ya (Greg A. refernce) and I had to show my son this vid. That truck is awesome!

[@markgoddard3115]

AWESOME PULL!!!!!! I think I got so excited !!! I creamed my jeans and I wasn't there lol love it Bruce Business Experience is the pete on the track!!!

[@michaeljones3827]

Love it Bruce!! The thumping sounds to me like a lash issue, and maybe one of the injectors is not opening up properly. Once you cure that, put about 10% more fuel to it, and add 75-100 rpm off the line to start, and see what happens. You should be able to send it to the house. Should be pushing about 60-70 psi of boost. As far as weight goes, I dont know if the air cyliners can handle it, but put some iron plate behind the bumper to add 250 pounds or so, and then a box on the rear by the 5th wheel, where you can put iron into. The pull looked great, especially the attitude of the truck during pulling. Needs a lot more fuel, for sure. Keep up the good hard work, my friend.

[@mikethorntonr1]

It's either a fuel or rod knock hard to tell over video but it's definitely could be a rod knock after horsing the truck around with injector harness backwards filling cylinders with fluid when not supposed to but hands down never heard a cat sound like a 2 cylinder deere something wrong with it no doubt

[@kopenhagenkid]

Awesome looking pulling semi Bruce

[@محمدمحمدالبياتي-ر1م]

Hi Bruce, nice truck and a nice laugh

[@Diddley-js6lf]

Well that answered exactly what I was wondering about the Air Bags actually Work to Your Advantage. You diffidently was way more 4000 rpm.

[@kopenhagenkid]

Awesome pulling tractors

[@jimmypatch5030]

Been waiting for this video! Love what you’ve done with this channel!!

[@jessedotson3308]

Bruce I’ve been watched your videos for a long time. Man I’ve watched you go from drag racing and burn out trucks and mud trucks but you seem to be set with the pulling and it seems to make you happy. I’m proud of you man you have came a long way

[@joemode101]

Not a bad for the first time can’t wait to see more. Nice job Bruce

[@DawesyD]

Who else hopes Bruce builds a full size pulling tractor with a massive motor. That would be bloody awesome.

[@DawesyD]

Edit : I posted the above comment when I started watching this video. So I hadn’t seen the part where Bruce says he is thinking of building one. My fingers are crossed he goes ahead and does build a pulling tractor. 💪🏼

[@michaelgreen4838]

Renagade is FIRST CLASS COMPANY

[@Lazycompass]

I love the binders welded to the frame lol Gotta do what you gotta do lol

[@kyle.carmichael5856]

That was Mike kehls wife he's from around me in NY we actually have his Dad's memorial dice run tomorrow hopefully they get that tractor all fixed up!

[@crackerjackottis9720]

You can hear that knock. Hope you fix it soon. Love to see it’s full potential

[@Michael-nu1py]

Dude that truck looked dam good going down the track sounded great front end up hell yes that was dam near perfect all that hard work paid off

[@davidwatson-r3m]

Great video pay attention to the truck and learn.

[@kcchapman2207]

Good rip! Now come on up to bowling green for the championships and have fun. Best pull you'll ever experience

[@fredette1978]

Awesome video can't wait to see more pulling stuff thanks for sharing

[@brandonfloyd6321]

Did great for first rip. 👍

[@Kodi5204]

Idk anything about semi but that thing still sounds like it got a mean miss I mean I get big injectors lope but that sounds like a dam Hit & Miss engine

[@h2motosports771]

Hell yeah!! Looking like a absolute unit too start off with!!! Done great!

[@kopenhagenkid]

Great video Bruce

[@dodge33445]

"Rumblin and Bumblin" Sounds like ROOTIN TOOTIN :D

[@ericgriffin397]

That was awesome!! Good luck and God Bless y'all!! Waiting for the next video...

[@robertturner2991]

Marion Fairgrounds this year for the tractor pull buddy

[@christhomas5794]

Well done Bruce, also respect from the UK

[@dustinjohnson4890]

Bruce I whould love to see some more content with the pulling truck she is beast

[@brendanmcduffee7636]

Good run Bruce

[@johnbartell4826]

Very nice first pass Bruce

[@timaustin110]

I like the headlights makes it look mean 👌👌

[@metalhead7181]

You did that like a pro Bruce.👍🇺🇲

[@Toddo-ld5ml]

Good job Bruce fun video

[@BlandNutz]

13:53 some serious g force coming off the front of that sled 😮

[@bd5av8r1]

“Business Expense” T-shirt, 2 please XXL!! 🤣😂🤣😂🤣

[@richcarey9883]

Looked asome nice Job

[@TierManDag]

Been waiting for this, nice work. Seems like the trunk needs some tuning though, don’t push her too hard until then, especially until you get proper gauges. All the best brother.

[@adrianspeeder]

Baaaaa. Full send ole son!

[@jaidansmith9274]

My dad works at Randy's transmission and Gilleyfab Enterprises in tooele utah

[@bakaht2477]

Well Done 😎

[@Anonymous..VQ3.5Lg35]

Holy crap, never seen a flip like that!! Glad it didn’t run away to the croud

[@jamespimental6919]

That sounded like a 2 cylinder John Deere when you was backing up to the sled

[@mohshad9700]

Super hero Bruce Wilson

[@jr01098]

IT sounds like that thing has a skip since you installed the new injectors???? it didn't seem to be dumping enough fuel the turbo cleaned up all the smoke I can't wait to see and hear that thing when its running 100 percent!!!! the best is yet to come!!!!

[@codytroyer9474]

This is sick! Cant wait to see more of this.

[@davidnielson1960]

Good job Bruce

[@chrisrussell8903]

Great job fellas!

[@alfy234]

Putting some power down😊

[@V8Lenny]

I'd check valve lash and injector settings. Under load running quite nice but there is still something not sounding 100% right.

[@mikethorntonr1]

100% on that something is knocking at idle hard and could be fuel could be a rod that you can't hear once it's reved up and louder but I've never heard of a cat engine sound like that like it sounds like an old gas job 2 cylinder jd just something ain't right with it probably why the original guy sold it had so much into already said screw it

[@V8Lenny]

@@mikethorntonr1 didnt sound like that before injector swap.

[@dodge33445]

This truck is a BEAST!

[@zachfaigley15]

keep the mic on ryan!! i love it. more people need a sense of humor like you

[@athulraj2743]

Hopping and waitting for one million sub💓

[@TheDfrancis37]

Looking good.

[@owenmorgan857]

Amazing Bruce

[@wallylewis868]

Use the vinyl/interior shine on the tire's it works awesome in a pinch 👌

[@danielakin7638]

Most use 100lb IH or JD suitcase weight just need to build bracket and hag them on

[@melvinhayes573]

You will figure it out brother if anybody can you can

[@davidwilliams6645]

Great 1st pull

[@Diddley-js6lf]

I am new to your Channel. I have to say I love it. God Bless Ya

[@emekaisuochi368]

Massive respect from Lagos Nigeria

[@caudle93]

What gear do you leave on during the pull? Very neat!

[@phillipjones9133]

Awesome pull

[@Mokelso78]

Good first pull

[@dieselman2229]

U mean to tell me that no one hears the engine missing.

[@paco1008]

Well done

[@garrykyper7131]

That was such a badass moment rolling down the track. What a rush that must have been.

[@jasonkraft3558]

Dude that was Soo sick!!

[@joshuabrown2543]

It's a addiction and experience. Get one of those shipping containers a small 1 and you can have all your tools and stuff in it as well as a area if you got to work on something. Cheap way of doing it until you get a setup and trailer.

[@burtbrooks7731]

Dang the cornfield Cadillac Deere is a loooooong way from home lol!!

[@antone2tone]

Man nothin beats goin to a tractor pull with a couple of good buddies

[@ericsugalsku1826]

Awesome!!! Bruce

[@makhirandall4822]

so glad to see some more fello ocala citizens

[@kellysimpson5081]

That was awesome

[@brandonmcintosh2735]

Exactly what the channel needed 👌

[@billydavidson6109]

That was very cool

[@Anonymous..VQ3.5Lg35]

Nice first pull!

[@johnarnett1172]

Just awesome sounded good

[@derylsanders307]

Great pull. Great job

[@AMSmechainc]

Need to bring it to Liberty Truck and Tractor pulls in ga