How To Break In any Outboard ( DONT VOID YOUR WARRANTY !!! )

How to break in an Outboard Motor is todays topic , please don't skip the proper step to do this correctly , it could lead to voiding your manufacturer's warranty , I hope this video helps someone a lot of people don't realize how complex New outbound engines are
For Fishin N Stuff gear please visit link.below
if your looking for something not listed , leave a message
www.etsy.com/shop/PebsPrettyf...

[@LiboltAdventures]

Great information. Thanks for sharing man. Now i'll know what to do when I buy a boat!

[@FishinNStuff]

Yes Sir , you planning on buying you a boat soon

[@myadventureoutdoors]

I wish you had stopped and shown us your lake house. This video reminded me of me. My doctor plugged a probe into me and told me I wasn't even broke in yet. He said I was more of a 2-stroke than a 4 stroke though with plenty of horsepower left. He also said my prop was a little too big. :)

[@FishinNStuff]

Haha something's wrong with you lol , ol and it's nice to know you ain't been broke in yet , but I not interested in your prop size lol

[@ztemde978]

Great timing on this video. Just put a down payment on a new Ranger with a 90hp Suzuki. I was reading the manual and thought the break in process was quite intense. You laid it out well, Thanks!

[@FishinNStuff]

It's not that bad we just just did the first 4 hour the first day then after that you can open it up just change speeds every 5 mins is basically all you got to do , I love my Suzuki by the way you pick a good one , I appreciate the comment buddy . I lie ti know what ppl think

[@fishin-impossible2992]

Good info Keith , keep the videos coming, great looking boat brother

[@FishinNStuff]

Thank you brother I appreciate it , I really like it . I appreciate you watching and commenting

[@benberry703]

Great video, good seeing you again , it has been awhile.👍👍

[@FishinNStuff]

I posted a video last week , I'd do more but I work like a regular guy its hard just doing one a week , I appreciate you watching brother

[@BruddahdTv]

Great tip for those boat owners or about to own one! Great share thanks for helping. Much Mahalo🤙🏽😊

[@FishinNStuff]

Thanks for watching buddy , I hope it helps somebody

[@markb.1259]

Great information for protecting $$ Expensive $$ toys!!! You have a great personality!!

[@FishinNStuff]

Man,,,,, thank you very much , that's super nice if you brother , and I appreciate that more than you'll ever know , I get the occasional hater making fun of the way I talk lol . But I try to stay positive . I must like acting silly sometimes laughter is the best medicine

[@Vincentdonnelly5158]

Thank you so much now all I need is a boat and engine😀😁😂. All jokes aside I have to say your videos are getting better and better each new video is better than the last. This one is so good it should have been put up after one are two more other videos first. Great job.

[@Asapfishing1]

Vincent Donnelly yea they are getting better and better

[@FishinNStuff]

I appreciate that my friend . I really do . I'm always trying to improve sometimes it works others not so much lol . I think we all improve every video even if we don't notice at first

[@tedg3250]

Great 👍 info, very clear about to order 2.5 4 storke. Will do just as u said. Thank you sir from NYC!!! One love

[@FishinNStuff]

Thank you for watching . It wasn't as hard as people make it sound .

[@StanleyOrchard]

Man I wanted to tell you I was watching your cutting board video again yesterday, and it gave me some really good ideas for a project that I want to do. Not gonna say what that is but I want to thank you for the insight!

[@FishinNStuff]

Thank you brother what ever it is im sure it'll be great , your turning into a professional looking KZbin channel man . I always enjoy watching . Your Instagram stuff looks great too

[@StanleyOrchard]

Man I hold you in the highest regard, that means a lot to me. Thank you!

[@psychonursehomestead9680]

Quit showin off with that new boat Brother hahahahaha!! I just got my Tracker 1648 side console. Its a starting point! Got the rod holders in and welder. Everything is uphill from here. Thanks again for all your help Always! God Bless

[@FishinNStuff]

God bless you too brother , I always love seeing your comments, I bet you live that 1648 , I know I lived my 1754 , I just wanted a little more room but they are great boats , I'm doing some stiff on this new boat because that's where my times been but I've got some good ideas ima be working on soon . So be patient brother lol you know all about then don't you ,,,,,I love your channel name haha thanks for taking the time to comment brother

[@bryanoverton4675]

Good Video. Just picked up new Suzuki 300.

[@carnufiasfishing8444]

Wow, good thing you posted this cuz when i ever buy a boat I'll know what to & not to do 🎣😎

[@FishinNStuff]

Yep , I'm sure when you get you a new boat they'll tell ya , I think lol thanks for watching brother

[@patriotcatfishersofamerica7985]

Great video my friend and great information too

[@FishinNStuff]

Thank you Sir

[@michaelrogers4285]

Great video, and great information too 👍. Thank you for sharing.

[@FishinNStuff]

Thanks for watching buddy , I knows it's not for everyone but I figured I was doing it so I would share it

[@michaelrogers4285]

I always enjoy watching your videos 👍

[@johnnybx3254]

Great info 👍👏🤠🎣

[@SK_CrappieCatching]

Sweet ride.... Yes the new computerized motors record almost everything...... Cool to see they are helping you get it dialed in...... When you gonna slime it up?

[@FishinNStuff]

Yep. They are really good guys at that dealer . That's the down side to ordering a custom boat , it takes a little dialing her in lol . You know all about that stuff you a boat man

[@TheReelFishermen]

Love it! Technology is awesome

[@FishinNStuff]

Yeah it is and it ain't sometimes lol

[@donthornton7528]

Just buying a new Evinrude motor went through a similar situation. Definitely enjoy your videos would like to get your thoughts on your new boat.

[@FishinNStuff]

I really like it a lot it's the biggest 1872 boost ive seem , I looked at the Ranger and Alumicraft boats I had on the last video but SeaArk won out . For one they are customizable and I love that . I got the 40 gallon and a 15 gallon livewell , and a Trolling rack which I'll use for Striper, Catfish and Crap . Plus SeaArks have life time Hull warrantys and you saw how helpful the dealer was getting the prop dialed in right . I appreciate you commenting brother

[@Asapfishing1]

Awesome video

[@FishinNStuff]

Thank you brother I appreciate it

[@rhinohd]

Good Stuff right there!

[@FishinNStuff]

Thank you brother

[@jenky1044]

Great show. Great advice. I liked the part when the technician said "it (the program) would tell if you over revved it". Holy shit, as much as these motors cost (about $100 per HP) you would think it would come all broke in, but *more importantly with a rev limiter* .!! If they couldn't program in a rev limiter, I would buy one and wire it in. Good grief. Thank you. Wonderful channel.

[@FishinNStuff]

Thank you So , I appreciate it. They fo have new limiters I hit it sheen I was getting my prop right they just shut the motor down lol . I thought I broke it then it cut back on and took off haha

[@jenky1044]

@@FishinNStuff My heart would have stopped when that engine cut out. LoL 😂

[@FishinNStuff]

Well it was new , so thre first thing that popped in my head was ,,,,, ol they fixin this crap haha

[@jenky1044]

@@FishinNStuff Hahahaha. I bet you did.

[@steelhead6368]

Enjoying your accent.

[@hookedcatfish]

Good job buddy very good job

[@FishinNStuff]

Thank you Sir, I appreciate it

[@coldhardtruth8518]

hell yeah!!! get er dun!!! hold my beer and watch this!!!

[@casualcarolinafishing5835]

My motor has more idle time on it than anything else. lol I usually let it sit and idle while I'm fishing along the edge for bluegills, that way I can keep moving and sticking. I don't have a trolling motor yet. I also don't know if I've ever had mine to full throttle more than a minute or two total. I found out pretty quick there was next to no difference between 3/4 throttle and full throttle on my motor, so why put the extra wear on it? I still need to take it in for it's first service too. Crazy I know, but I just haven't really been out in the boat that much since I got it. These dang kidney stones are a real pain. In more than one way. Love your boat buddy. That thing looks sweet on the water!💪👍💯

[@FishinNStuff]

Thank you Bill I like your boat too , it's awesome . Im going ti miss my Grizzly too . There's no such thing as a perfect boat just what you need most . I think trim makes the most difference in the larger boats . There's about 7 mph difference in the motor trimmed up and all the easy down

[@Reviewing_Playing_and_More_RPM]

Wonder how many would ever take there boat back to the shop twice, especially after only having it a short time...think they'd test it to get it right first...Do people take their motors back often? wondering if this is a common practice...Thanks...Greati nformative video...

[@FishinNStuff]

The reason I had to dial my prop in is because it's a custom ordered boat , places like Basspro and Cabelas don't have to do this because they don't sell custom boats they have different kinds but they are pretty much all the same si they know what prop to put on em , the type boat Aluminum, Fiberglass , modV or Vhull will change thing even the eight of the boat and the placement of the console. The motor was on the boat when they got it with my boat so the throttle cable wasn't they're fault , but the thing is you try and get that kind of help with dialing in your boat at Basspro or Cabelas . It ain't going to happen lol . That wad a great Question sorry for the long answer buddy

[@Reviewing_Playing_and_More_RPM]

@@FishinNStuff appreciate your answer, great info to know...Thanks very much...

[@davids7476]

Dam, I did not realize they were putting computers on outboard motors now too. Good to know thanks.

[@FishinNStuff]

They watching you lol , it really help them fix em , because it can tell what the motor was doing while you were on the water ,

[@davids7476]

@@FishinNStuff lol, they are gonna get really board watching me ha ha, just wondering how well they hold up with electronics, I know on a big truck diesel the electronics have neutered them. I am fond of mechanical motors myself primarily for reliability and the ability to so minor repairs on the water. You know pull spark plug clean it up, turn a screw adjust a carb etc...FFC fuel fire and compression.

[@FishinNStuff]

You confused me for a sec the cause I saw diesel then spark plug haha , I hear the new outboard are really good , guys are getting over 7000 hours on Suzuki's with no issues. But like anything else , stuff's gonna break sooner or later , the nice part about the computers is they can see what was happening when you were on the water. I remember when I was young taking my car to a mechanic and telling him what it was doing , only to have it never do it while he was driving it lol

[@kenh6722]

So when you are supposed to idle it in gear for 15 minutes are you supposed to pull your anchor as I'm thinking it'll not work on anchor it might try to run over the anchor and if you pull your anchor idling and strong current hits you and the idle is too weak to fight the current, can you gas it to prevent crash, I'm trying to find the best way to do this on sailboat at anchor, at least for the non moving parts 🤔

[@stillinyaisstillinur3300]

Can U pls include what things may cost on repair or visit to the shop big ty

[@FishinNStuff]

What kind of thing buddy give me an example ?

[@gregbryant9673]

Thanks for the info. Put some slime in that new rig.

[@FishinNStuff]

Im going to brother I don't have any rod holders yet well sorry and rod holder bases , even monster. Com says they are out of stock . I guess I know what my next DIY is going to be haha

[@robbyhowell8668]

How did it start at 21 pitch not revving enough, so went to 19 pitch and over revving, but then ended up that 22 pitch was the right prop??

[@ronsteitz4535]

I just purchased a new 2021 Suzuiki outboard short shaft with tiller. It has electric start, trim&tilt. How do I know the RPM motor is running when breaking in on back of my fishing boat? Do I need to buy a wired on Tach gauge?🤔

[@FishinNStuff]

I would call the dealer and ask them . They might have a solution but im not sure .

[@trophyhunter8615]

I know I should follow their recommendations but I always break them in like I'm gone run it. Wide open

[@FishinNStuff]

Drive it like you stole it haha , hey it's your money and you bought it . I say it's up to you 👍

[@briancolorado6448]

If you have 100 hours on the boat, how would the program be able to tell if you did the break in correctly, as it shows RPM's broken down, but not during which hours the RPM's were achieved? Thanks

[@FishinNStuff]

I'm not a specialist with the equipment . But they told me they could see everything done with the motor

[@tombeckett4340]

👍

[@FAKE-NAME]

Speaking of rpm range and props I could use some advice... I'm currently very underpowered running a 95 yamaha 25 on an old 70s or 80s 16ft fiberglass holds 4 people(me 2 kids and wife). I talked to local dealership and i can't afford to upgrade to real power for now... so I asked about possibly a better prop and they suggested a prop meant for heavy loads. Considering right now flat out is pretty dam slow I'm wondering what running the prop for heavy loads would actually do? Would it be harder on the motor because it has a better bite on the water?

[@FishinNStuff]

Better bite diyers run your RPMs up , but I wouldn't say it's harder on the motor , normally if you go to a Stainless steel prop you have to go down a pitch size , because like you said a Stainless steel prop bites harder and had less flex , so it rings your RPMs up a little, but I don't think a SS props would benefit you much , I have heard of ppl with smaller outboard going to 4 blade Aluminum props and it helping . But your not going to go faster doing that it'll just help you get on plane faster and easier

[@FishinNStuff]

This guy seems to know what he's talking about and this might help you out . kzbin.info/www/bejne/iaGTfpeBr72Uidk

[@FAKE-NAME]

Thanks for the info ... think if I can find a 4 blade I might give that a try as actually getting it to plane right now just ain't happening lol so if a 4 blade could just pop it up there that would be great. Also would trim tabs help raise the back end or would they be less effective at slow speeds?

[@FishinNStuff]

Im not sure about the trim tabs , a 4 blade or going down on your pitch will help the bottom end and your hole shot . If your not getting on plane your never going to get any speed any ways . Theres dealer should be able to help sounds like he was going in the right direction. The video will help you understand it better too . And the most useful tool for getting the prop right is a tachometer. Dirty about the auto correct mistakes up there lol dang phone lol

[@jimardizoni3453]

Save your money stay with cheaper props till you get more motor or lighter boat .

[@skipc43]

They probably require such a complex breakin because a lot of people wont follow it, and then they wont lose money doing warranty repairs.

[@FishinNStuff]

That's true too but technically they could refuse to do warranty if you don't do the breaking correctly

[@pbrown5191]

What kind of boat is this one

[@matthewanthonyoutdoors1364]

Thats good info, but you been on my home lake!!!!!!!!

[@FishinNStuff]

It's only seen Moss and Norman so far I thought Wylie was your lake Matthew

[@matthewanthonyoutdoors1364]

@@FishinNStuff Moss is my crappie lake

[@ktmdays]

I got a yamaha 115 after 10hrs is it ok to troll at 6mp for a long time

[@FishinNStuff]

It probably is . Because it wound be just like breaking in the motor . But unless your saltwater fishing , that's a little too fast for most fish

[@ghostshadow9046]

Had laughs at big lake marina in Alaska, idiots came in complaining boat wouldn't get up on step, the trailer was still strapped to the boat, had an 20 foot long by 8 foot wide Air boat with GM vortec v6 with 6 bladed adjustable pitch carbon fiber prop could do 53mph up river and 58mph down river had 3/8 inch PTX teflon on the bottom for dealing with rocks/gravel

[@timothymcvay7286]

Hey buddy did a hour meter come on the boat

[@FishinNStuff]

No sir I just never cut the motor off the first day and used the time on my phone stopped to use the portajon at one boat ramp and left the motor running lol . Wer did stop and eat too but I kept up with it

[@timothymcvay7286]

@@FishinNStuff how do you like the new boat which sea ark is that

[@FishinNStuff]

I really do like it a lot . It's much bigger and has plenty of power . Love the live wells if you need em . I have the SeaArk RiverCat 180 with a 140hp Suzuki.

[@zegrysboshoff6191]

30 pound carp catch today

[@JamesJones-cx5pk]

Check your owners manual first.

[@donqueen249]

Just think if your car had to be broke in like this good lord you would get run over in my home town

[@FishinNStuff]

Haha I know it , that would stink . You'd have to break it in on a parking lot or they would have to make break in lanes lol , I remember the older cars had to have break in oil put in em the first old change to seat the ring though

[@georgeshotrodbarn2113]

Puff and Stuff its called a moda

[@FishinNStuff]

Haha an Outboard Moda I'll remember that lol 👍