DIY Egg Sinker Mold

TaDay we are making an awesome DIY Egg Sinker Mold , That happened to turn out pretty dang Awesome . I appreciate you watching and Subscribe if you look what you see
For Fishin N Stuff Gear visit the Link below
HATS
DECALS
SHIRTS
www.etsy.com/shop/PebsPrettyf...
To save 20% off of any ,,,,,,,,,,,,Hybridlights,,,,,,,,,
Go to
hybridlight.com/discount/Fish...
enter code below
FishinNstuff
Thanks for watching dont forget to subscribe and click the bell for notifications
For 10% off of Katfish Clothing click on the link below
www.katfishclothing.com/?ref=Fishinput
Enter Code. FISHNSTUFF at checkout for 10% off all purchases

[@toriankirland383]

I used these with the Team Catfish weight slides to make a kzbin.infoUgkxdmsDj7fQXe77DC0l7P7ua8B3PiESUubM Carolina rig and they were perfect for the ponds I fish. I have also used them to make 3 way rigs and these work perfectly. Haven't had any issues with them snagging in rocks or in weeds yet.

[@jimjoyce962]

If you smoke the mold with a candle 🕯the sinkers won't stick, just tap the open mold with something non marring and the sinkers will drop right out. Great video, I've watched them all.

[@jamesbaskins6351]

Thanks for the video

[@jaredbradley152]

2nd that I always soot a mold.. just hold it at a angle a few inches away from the molds, also smoke the inlet, it will make the lead flow way way easier. Best mold release ever. I heat mine with a heat gun

[@michaelmosley254]

I dont make stinkers but I like your videos

[@rider660r]

The way these are made you will have to smoke or dry spray the mold,unless you can/want to make the cavity angle outwards towards each half and they'll then just fall out but most molds smoking or spray is unneeded. Over my 30 some yrs pouring sinkers,jigs,bullets,etc. and my stepfathers 50+ not one of our molds ever needed smoked or sprayed. I do have one newer jig mold though I may use it on to see if it'll help Do-it Wobble Head mold.The way it's designed the outside edges catch as you try and pull it open. I been going to make some custom jig and sinker molds just haven't got around to it yet.I will add handles and a hinge though and make them able to pour 8-10 or 12 at a time depending on size.

[@jaredbradley152]

@@rider660r I smoke my molds for a cleaner pour not a easier release. I like to use different hooks and sometimes the molds will not pour as easy with larger shank hooks.

[@jeffjones4006]

As a retired guy I love your channel, great ideas that don’t break the bank. Keep it coming great stuff

[@mrhalfstep]

Bravo to you, sir for showin' your mistakes. That how a real Man does it.

[@FishinNStuff]

Lol thank you

[@jaredbradley152]

Awesome video! 1st real comment.. 😆

[@ColKorn1965]

I already have a DIY mold.... it's called my neighbor. He makes lead weights for a living. 😃

[@shoreangler3383]

Yep. This video is AWESOME. :) I stopped short of making my own custom molds for jig heads, because the mold "blanks" were just as expensive as the dang finished molds. Lol NOW? I just learned how to make unlimited mold blanks for super cheap, super fast. 👌 AND, it's gonna be the same/same for plastic bait molds! Sweet! Thank you!

[@paulfalcone4115]

Caught you a second time by accident, noticed the drag sinker video first and was pleasantly surprised it was you.Education with entertainment. Keep up the good work and thanks,PS went to the third video.

[@TimIrvin]

Excellent as always.

[@chucksmith5002]

Them Sinkers looked Pretty Darn good .

[@terryboyd9875]

Excellent project….TKS

[@mikecha1957]

Very cool Keith

[@bwcok7947]

TADAY! We get to see him lay some eggs! I mean make some eggs! I mean make some egg sinkers! Gave me a great idea for some snap on sinkers for walleye trolling! Thank you! Stay safe and healthy!

[@FishinNStuff]

Lol

[@ddselvig]

Your mold could have been heated more before pouring so your sinkers would not have so many wrinkles. This was a really great idea for making your own sinker mold. Thanks for the video!

[@whoopiesslingspies4072]

Also adding linotype to the lead or tin. More important on bullet molds of course but having pretty sinkers is nice too!

[@abdeslammihamou3686]

excellent thanks

[@charlesmcguire3107]

Awesome 👏

[@genesloan3175]

Good one....

[@brianr555]

Another awesome video! Thanks Keith! I have been contemplating making my own muzzleloader/buckshot molds…i think you just pushed me over the edge to try it. Of course i will make an egg sinker mold as well!

[@kavak1344]

Awesome!👍💥

[@jconsolini6286]

Good Job ............ Two Thumbs Up. Tight Line

[@victorsalinas7849]

Excellent as always

[@danham3344]

Super cool project!!

[@ryanbortzbluecollarlife]

I’m definitely going to make my own version of this. Thanks for the idea

[@stevepereira8898]

Another cool video 👍🏻👊🏻

[@pinetree9343]

This video is just what I needed for my next build. Thank you

[@andrewenicola5851]

Very nice project sir👍

[@bhardwaajmohabir9147]

Very nice thank you for showing it on you tube have a good night 🙂

[@Tacklefinlures]

Now we ready!!!! 😂😂😂😂😂😂😂😂

[@whoopiesslingspies4072]

Very nice job on that mold. Super cool!!

[@ronaldburleson1099]

If you think Race City is high go to some of the others they charge a minimum. You can't buy just a small piece of metal. Thanks Keith always great.

[@johnbush2798]

Keith, Another Awesome DIY...just Awesome. Did I mention it was Awesome?

[@joebuck66]

Nice build. Gotta love them egg sinkers.

[@markfletcher5457]

Always great stuff.

[@blaircox1589]

Awesome 👍 if you have all the gear and equipment already to make'em 😁

[@mrfleming5445]

I’d say that was awesome

[@BrokefishN]

John had your video playing before I knew it was up.

[@George-tz1cv]

Great idea. I don’t think the fish will care what they look like.

[@AeroGraphica]

You could also grind a 1/2 inch drill bit to make a round finishing bit .

[@jerrymoore6227]

Great job. Thanks

[@guyh.4553]

Now isn't that slick! Cool idea!

[@scottlytton5328]

This is a smart channel for sure. Entertaining too, especially that lil green plug, he funny as heck!

[@FishinNStuff]

Thank you very much

[@jonaspeoples6931]

AWESOME!!!!!!

[@earniederboven5100]

Freaking awesome dude

[@hopechannelcat5462]

nice job again. like watching you with all your diys. keep em coming. you the man

[@myminuteofangle7313]

I like you a lot man...showing the that shit happens when it doesn't work out is priceless. the work that's involved to make a plan come together isn't pees and carets.

[@FishinNStuff]

Sometimes you got to go back to the drawing board lol

[@VernonTwins]

Great job. !!! Please tell your wife that I will be ordering a bunch more of the fish-n-stuff black tees. My twin boys wore them to school (6th grade). Now all their friends want one just like Keegan and Camden’s. I’m just say’n. Lol. Mike V.

[@FishinNStuff]

I sent her a screen shot lol . Thank you brother

[@Lotharqp]

Super video, thanks

[@jameskraus2433]

Wax makes a very nice lube for working with aluminum, either drilling or tapping holes and it is cleaner then liquid lubes.

[@ermannodibenedetto3064]

Numero uno Mr.Keith....superbravo

[@chrisguice139]

I use race city for my welding business. If I get there early enough I like to stop at Stacey's for breakfast.

[@daveedwards6567]

Excellent video your sinks look great big thanks nice videos I whach them whenever you up load good job 👍

[@andyjohnson675]

Thank you that is the one I’ve been waiting on, you make it look easy lol

[@terrywebb3340]

Where I fish I need a little heavier sinkers. So i make mine by using a tea candle cup. My weights weigh between 5 & 6 oz.

[@aleenabeel8232]

Love it !!

[@machinegunpreacher2469]

@12:54 A stainless steel ladle from the dollar store works well too. I've melted many a pound of lead in it and it's still good to go.

[@steveroberts80]

You can use two flute high speed end mills for aluminum. Wd-40 is the best thing I’ve used when cutting it. You could also use some sort of saw to put pry slots on the corners in case it sticks

[@johnkirven2910]

Keith, try using alcohol when drilling aluminum. It keeps it cool while lubricating the drill bit. I really enjoy watching your videos.

[@FishinNStuff]

Thank you and thanks for the tip , I'll try that

[@thestonesaver6345]

Always good stuff Mr. Keith!

[@harizismail314]

Exactly what I needed....just as described!!

[@mikeedwards2384]

That was awesome as always love the hacks and the lures lol great stuff

[@Tacklefinlures]

That was awesome! 💯 I haven’t laughed this hard for a minute. Keep them coming!

[@timothybrown1849]

That's awesome

[@chrisfultz1528]

Really awesome video, I got to try this one!

[@carolemcconnell4651]

Awesome video

[@HooksandHammocks]

Allsome job Keith!

[@eldoctorexxl]

Hello from Portugal 🇵🇹. Good work

[@FishinNStuff]

Thank you

[@MADMACKERELFISHING]

That was awesome 👏

[@FishinNStuff]

Thank you

[@devialas]

Great 👍👍

[@David_11111]

yay lol I am beginning to warm to your style :)

[@downtownerniebrown3069]

keep them coming buddy ty for sharing

[@catfishinwithcrow685]

Keith I have use a few of your DIYs I really like the koosie one to keep my leader ,material in thanks for another great idea

[@CatfishWeekly]

Another AWESOME video Keith!!!

[@frederikmare9002]

Thanks for the great video 👍👍👍🖐️

[@GooberTimeOutdoors]

Dig it! Well done!

[@tuloko16]

I make the moulds for my cast net weights using bondo. There are several tutorials on yt on how to make them. And yes, the bondo can withstand the heat of molten lead just fine. Also, if you really want aluminum and dont have the tools and stuff, lee moulds (they sell moulds for casting bullets) can sell you a blank mould with locating pins and handles. All you do is some drilling and shaping your “pattern”.

[@itowmyhome797]

Thank you

[@jonathancoley8112]

Great video! 👍🏼

[@kt.redacted1401]

Vids have some really good idea's. In fact I have several in progress. Main reason I watch EVERY vid is this man his bird and his bait crack me up. And I like the music. Keep 'em comin'

[@FishinNStuff]

Thank you for watching

[@luxorbill269]

Wow, makes me want to buy a drill press. I have the same hot pot for melting lead. It is perfect and easy to pour.

[@ermhicks5915]

Not only is this video entertaining its also.......Awesome! I just pulled and old cast net out of creek some lazy dingus left behind. Not only did I clean their mess up,I got free sinkers! I thought that was pretty dang aw_ _ _ me( fill in the blank) 😅

[@FishinNStuff]

Lmbo , thank you Sir

[@jerrywtt]

First comment finally!

[@rhondakendrick2563]

thank u for the info

[@MrOldclunker]

Great instructional video.

[@FishinNStuff]

Thank you Sir

[@toddmiller3387]

Bought bunch of molds last trip to cabelas that was on sale so got as many as I could afford. Remember to heat your mold before pouring hot lead into. I also put a cake of bees wax in my melting lead never had problems with stinking...

[@TundraMantis]

You can run a burning candle under the inside of your mold so that it coats it in soot. That way the lead doesn't stick. Also your mold is a bit cold, can see by the waves in the lead. Fantastic video! Made me want to go make some molds for myself now.

[@FishinNStuff]

Thank you

[@jcdesignsandboat-works8290]

Been away for a while but catchin’ back up! Love the sinker mold brother!!!👊🏻🇺🇸

[@andykjohnsonjohnson7622]

Awesome DIY VIDEO 👍👍. I make my line holes, the same diameter a plastic candy stick. Cut a length 3mm longer than the weight, push through the line hole. And mushroom them over, with a lighter. As it helps with the weight running, up & down, without chaffing your line. As that is how most, in-line Carp weight are especially in-line feeder weights. A small half Oz in-lines are awesome, when fishing for trout with doe-bait 🎣😃👍

[@FishinNStuff]

Good idea

[@wallaceknifeworkshomestead]

Awesome!! You guys are lucky to have scrap yards that will sell you stuff like that. They wont do that around here.

[@prestonrussell605]

Very informative and entertaining video as always! Really enjoy your videos a lot !

[@FishinNStuff]

Thank you

[@connorhus]

coat the inside of the cavity with candle smoke to make it release more easily.

[@jeffjackson5331]

Cool

[@edinelsonramirez5656]

Molds can't be that expensive to just buy! :)

[@FishinNStuff]

Try about 45 to 150 dollars a piece

[@jons5898]

Well jeez that looked EZ, now I’m sorry I bought an egg sinker mold last spring ! 🤔🤣

[@bitumenjunkie2435]

G'day mate luv the PPE 😆 your a funny bloke nearly Choked on me beer 🤣 keep up the humour mate it makes your show stand out. No wonder real Aussies and real Yankees get on, we got the same humour 🍻

[@FishinNStuff]

Thank you Mate.

[@pedromoreno8111]

Very informative vid 😀

[@donmoroz5502]

You could press them in using a "C" clamp with a large enough throat opening to press the stainless steel rod into the blocks. You may need to use a piece of hollow steel rod over the clamp handle to increase the leverage to turn the screw and press the rod intl the blocks.

[@markb.1259]

Very nice project... I think I'd want to make them more than two at a time, so I'd probably go just a bit longer on a mold. Loved the vid!

[@FishinNStuff]

I would too . But it was just a tutorial . Steel might hold the heat better in the mold .

[@markb.1259]

Steel would be much more difficult to carve a sinker shape into.

[@alexmikhael5061]

AWESOME!!! :)

[@eduardocortesgamboa3471]

Very god video thanks for you tutorial

[@johnthomas5806]

thanks again