Tap to unmute

8 Simple Fishing Hacks

  Рет қаралды 205,430

Fishin N Stuff

Fishin N Stuff

Күн бұрын

Пікірлер: 332
@marshallsee9794
@marshallsee9794 3 жыл бұрын
Heat shrink works good for trailer hooks for buzz and spinnerbaits💪🇺🇸 thanks for the awesomeness 👊
@dennisjennings5459
@dennisjennings5459 3 жыл бұрын
I put flex seal on my anchors works great keeps them from rusting and staining the boat carpet🐟
@waltertx.6020
@waltertx.6020 3 жыл бұрын
Dennis, Great idea! 👍
@joshuabates1462
@joshuabates1462 3 жыл бұрын
The flex seal on the net was genius!!!
@FrankLadd
@FrankLadd 3 жыл бұрын
No, the magnet strips were genius!
@madnesshero4675
@madnesshero4675 3 жыл бұрын
I got a simple hack for ya, specifically for ammo boxes, the cheap plastic ammo boxes make great storage boxes for packs of soft baits, this is especially handy so u dont have to be mixing plastics together that might react with eachother, and THAT is AWESOME!
@jeSuperfly
@jeSuperfly 3 жыл бұрын
Ooooo I'm digging the flex seal/net hack!
@TheDtrolinder
@TheDtrolinder 3 жыл бұрын
You're a frigging genius...
@cooterduke3605
@cooterduke3605 3 жыл бұрын
Dayum good hacks! Everytime my wife walks by when your videos are playing, she says, "Well I guess you're going to HF/HD tomorrow..." And she's usually right! Keep'um coming buddy!
@FishinNStuff
@FishinNStuff 2 жыл бұрын
Lmbo . Tell your wife I'm sorry lol
@ozzarks
@ozzarks 3 жыл бұрын
Love all your hacks, but that rubberized net.... "IS PRETTY DANG KOOOOL"!
@JT_70
@JT_70 3 жыл бұрын
You could use the discarded foam sealant “balls” as catfishing floats (j/k). I installed the HF magnet bars in the VersaTrac grooves on the front and rear decks to hold hooks and baits when I change baits.
@charlesdotson9957
@charlesdotson9957 3 жыл бұрын
Great idea!
@rcajun8902
@rcajun8902 3 жыл бұрын
you have pics?
@JT_70
@JT_70 3 жыл бұрын
@@rcajun8902 Unfortunately, my boat is 30 miles away at my son’s home. Had I seen this response earlier I could have taken a pic as he and I were bass fishing this afternoon. To install, I used 1/4”x 1” carriage bolts (2 per magnetic bar) and nuts (SS preferred). I also put small sections of heat shrink over each end of the bar and made holes thru it for the bolts. This was to protect the boat finish where the magnetic bars would touch (you could just wrap the ends with electrical tape). The magnetic bar is U-shaped with the magnet inside it. The open side (the bare magnet side) should face away from the VersaTrac and toward the inside of the boat. The magnetism on the smooth side of the bar is too weak to be of any use. I hope this helps.
@daleandrew9634
@daleandrew9634 Жыл бұрын
How 🤔
@jamesfisher7410
@jamesfisher7410 3 жыл бұрын
I watch every video you put out. !!!! Thank you Jim Fisher.
@scottsoucy6186
@scottsoucy6186 2 жыл бұрын
I buy most of my beads and a lot of my fly tying yarns and feathers at craft stores! I can buy a whole skein of yarn at the craft store for less than I would pay for a 3 or 4 yard length of yard on a card.
@peaceandlove0317
@peaceandlove0317 3 жыл бұрын
Great ideas! I love the magnetic strips and the net. Thank you for explaining the beads. I hadn’t been using them freshwater. I will begin doing that.
@anthonybarrera3775
@anthonybarrera3775 3 жыл бұрын
Loving those awesome hacks! The rubberized net is genius!
@metaldetectingtruckerandot1932
@metaldetectingtruckerandot1932 3 жыл бұрын
Definitely going to be using alot of these hacks. Thank ya neighbor.
@MrKeenaz
@MrKeenaz 3 жыл бұрын
The Net with the flex seal won me! I’m off to get sum rite now. Thank you Fishin N Stuff.
@FishinNStuff
@FishinNStuff 3 жыл бұрын
Thank you
@terrytrexler9340
@terrytrexler9340 3 жыл бұрын
The rubberized net looks “really awesome”! Gonna have to give that one a try.
@2reelyakrz481
@2reelyakrz481 3 жыл бұрын
Cool hacks!!! Absolutely love the lure with the attitude! 🤣
@waltertx.6020
@waltertx.6020 3 жыл бұрын
FishNStuff I really liked all of those awesome hacks! But those little silicone ties were more than AWESOME 👍 THANKS 👍
@18177able
@18177able 3 жыл бұрын
I chuckle the same time you did when you did number 7 😄
@mitchellhelms7238
@mitchellhelms7238 3 жыл бұрын
Whole bunch of great stuff the net was awesome I'll be doing that one for sure
@brandonreynolds3884
@brandonreynolds3884 11 ай бұрын
Flex sealing the net is pretty awesome!!
@yajtramer6913
@yajtramer6913 3 жыл бұрын
The lure talking is super funny Flex seal. Next purchase
@mgk_333
@mgk_333 Жыл бұрын
I love the flex seal spray on the net.
@zakthewarcat3172
@zakthewarcat3172 3 жыл бұрын
so far I have taken at least 1 hack per video and if I need a solution to a fishing problem your videos pop up I LOVE IT
@keithhahn1266
@keithhahn1266 3 жыл бұрын
Absolutely awesome!
@jmrose60
@jmrose60 3 жыл бұрын
Great idea on the trolling motor brace. I got to get to work on that. I look forward to every video and always get a good idea from it. Thanks man!
@TheWaggaBloke
@TheWaggaBloke 3 жыл бұрын
Another Brilliant Job Mate Keep’em Com’on
@MrYOGAS
@MrYOGAS 3 жыл бұрын
Have a blessed day. Thank you. Absolutely awesome,
@MrRobmack
@MrRobmack 3 жыл бұрын
Genius as always. I appreciate all the hacks and info of your content and put plenty of them to use. Thanks again and keep em coming.
@donb6070
@donb6070 3 жыл бұрын
Low expanding foam insulation for door and window installations will provide the ice chest insulation without the excess waste.
@catfishreaper4922
@catfishreaper4922 3 жыл бұрын
The trolling motor hack is zackly what I needed ! Thx !
@Lotharqp
@Lotharqp 3 жыл бұрын
Flex seal hack was fabulous, as always!!! Keep it up and thanks
@davidnave4349
@davidnave4349 Жыл бұрын
I love the idea of the flex seal for the net. finally somthing that shit is actually good for. Thanks for the Hack.
@mikeedwards2384
@mikeedwards2384 3 жыл бұрын
Great Awesome fishing hacks and love the lures lol
@FishinNStuff
@FishinNStuff 3 жыл бұрын
Thank you
@brianlykins6663
@brianlykins6663 3 жыл бұрын
Great tips, again brother. Keep up the great work and we really appreciate all your work and great tips. Tight lines and screaming reels.
@RWildekrav66
@RWildekrav66 2 жыл бұрын
You are a bonifide outdoor genius !
@FishinNStuff
@FishinNStuff 2 жыл бұрын
😵 thank you I appreciate you watching
@want2boutdoors274
@want2boutdoors274 3 жыл бұрын
I LOVE ME SOME FLEX SEAL. AUWESOME video Keith. Think Mr. Blade bait needs to be thrown in the drink, so he learns a lesson. That magnet back would be good for when you're moving spots, can clip the hook to it.
@billroyals7223
@billroyals7223 3 жыл бұрын
Very cool hacks. I especially liked the flex sealed net...
@CreoleCatfishing
@CreoleCatfishing 3 жыл бұрын
Great ideas. Need to make the trolling motor support for mine😁
@NorthwestOpenSeason
@NorthwestOpenSeason 3 жыл бұрын
I think you should start a segment called “Will it Flex Seal?” Haha. Rubber coating all sorts of stuff is helpful, including your canon ball sinkers and fishing rod butt for grip
@charlesdotson9957
@charlesdotson9957 3 жыл бұрын
Fixed a agrivating leak on boat with flex seal 2 years ago that still works!
@NorthwestOpenSeason
@NorthwestOpenSeason 3 жыл бұрын
@@charlesdotson9957 Awesome
@whiskerdreams7146
@whiskerdreams7146 3 жыл бұрын
Great idea on the shrink tupe to hold the snell knot..
@Blixtaah
@Blixtaah 2 жыл бұрын
This guy is like the Mcguyver of fishing, love it! :)
@FishinNStuff
@FishinNStuff 2 жыл бұрын
Thank you 😁 I loved that show growing up lol
@oldguyrulesweyerman6955
@oldguyrulesweyerman6955 3 жыл бұрын
Ahhh man you are good. I've had an old decoy bag that I've wanted to use for a net. I have some, had some exotic wood for the handle (I'll have to get some more). Because I didn't want the fish to get hurt in the fabric, now they won't once I coat it with flex seal. 👍GOOD ONE!!!
@mchtzn
@mchtzn 3 жыл бұрын
Once again you gave awesome ideas, greetings from 🇹🇷
@FishinNStuff
@FishinNStuff 3 жыл бұрын
Thank you Sir
@paulandersen9386
@paulandersen9386 2 жыл бұрын
This is the best hack video I have seen. I can use all of your ideas. Thanks much. 9:12 pm
@shanepowell5115
@shanepowell5115 3 жыл бұрын
The little LUER Dude is cool. I VOTE WE NAME HIM, STICKY,,,, GREAT VIDEOS, LOVE THE CHANNEL
@FishinNStuff
@FishinNStuff 3 жыл бұрын
Thank you Sir . Sticky I kinda like it
@bitumenjunkie2435
@bitumenjunkie2435 3 жыл бұрын
G'day mate great show as usual, great idea with the net and plenty of humour 🍻
@daviddura1172
@daviddura1172 3 жыл бұрын
Every one a winner!
@MrAwsomeg
@MrAwsomeg 2 жыл бұрын
I close the handle end of the trolling motor lift lanyard into the closest locker to hold the shaft down so it doesn't bounce around whilst road travelling.
@sherrybeaubien7007
@sherrybeaubien7007 Жыл бұрын
Good job man, sure enjoy what you’re doing…keep up the good work!!
@joebuck66
@joebuck66 3 жыл бұрын
Loved all the hacked but, I have one of them cheep nets I’m going to try the flex seal on. Great video Keith.
@craigotto9103
@craigotto9103 Жыл бұрын
You have great videos. They crack me up and make my day. I need a DIY to mount a fish finder to my pontoon boat with out drilling any holes in it. I have the transducer figured out, I just need need a idea for the finder. There’s a cup holder close and I thought about using pcb to make a mount. Thanks, Craig
@FishinNStuff
@FishinNStuff Жыл бұрын
Pvc would probably work great in a cup holder . I've got videos about heating the pvc and forcing it into it so it would be tight . Hey I appreciate you watching . Thank you very much
@randomconsumer4494
@randomconsumer4494 3 жыл бұрын
I've got 1 for you... Armor all have a UV blocker in it to protect vinyl and plastic. Hit your tackle boxes with a little armor all. Hit your cooler with a little armor all. Keeps the sun from breaking them down.
@FishinNStuff
@FishinNStuff 3 жыл бұрын
That's a good idea
@larryking606
@larryking606 3 жыл бұрын
My Good Sir , Loved the video ! Now you got my attention when you got to the net !!! I have a fairly large net and I really don’t have the money for one of them high dollar ones, but wished I did. I am gonna ge a can of that flex seal and do mine! One thing , do you know if that stuff runs ? Well I will do a couple of light coats and see how it does ! Thank you a big bunch for that info ! Take Care and Be Safe
@charlieboutin3341
@charlieboutin3341 3 жыл бұрын
Thanks for the great Hacks! I did the same thing with expanding foam and my cooler lids a while back, works good! I’ll be using all these hacks except the troll motor support, because I remove mine from my small boat when transporting. Really appreciate you helping save loads of money, so I can get more Fishin Stuff..Thank you Keith! 👍👌✌️🎣
@ziamwarda
@ziamwarda 3 жыл бұрын
Excellent ideas
@TheoriginalPhilGood
@TheoriginalPhilGood 3 жыл бұрын
I like the bad-attitude lipless crank bait the best now, use to be the talking spinner bait.
@Brunnen_Gee
@Brunnen_Gee 3 жыл бұрын
That bead trick can be used for all sorts of things. Companies love taking a relatively common item, slap a label on it for a specific use, and then double or triple (or more!) the price. Look up spray glasses cleaner, and then look up spray monitor cleaner. Same thing, but one costs way more.
@PRN-Life
@PRN-Life 3 жыл бұрын
Now that Spray Rubber thats some stuff !
@safarijoesadventures
@safarijoesadventures 3 жыл бұрын
I just found your channel a few weeks ago. My wife and I really enjoy the information and it’s fun to watch.Keep up the good work.
@FishinNStuff
@FishinNStuff 3 жыл бұрын
Thank you and thank your wife for watching
@n8trainr
@n8trainr 3 жыл бұрын
Can't get enough of these vids...
@RadReelingFishing
@RadReelingFishing 3 жыл бұрын
A DIY rubberized net, only on the Fishin N Stuff channel do you get awesome hacks like that one. Thanks!
@ratdog3055
@ratdog3055 3 жыл бұрын
Nailed it again!
@thomasgoff4700
@thomasgoff4700 3 жыл бұрын
I got some of those harbor freight ties and they work great, but after a while the wires poke through the silicone. What I did is take the wire out and use paracord and removed the inner lines and used the sleeve sealed both ends with the wire inside they work awesome. Same idea like your slinky weights you did in one of your hack videos.
@AnthonySmith-en6im
@AnthonySmith-en6im 3 жыл бұрын
Another great video on "how to" Really appreciate you mentioning where you buy products for your projects. Love my new Fishing Stuff t-shirt too.
@FishinNStuff
@FishinNStuff 3 жыл бұрын
Thank you for your support brother. I appreciate that alot
@reelnraideroutdoors2932
@reelnraideroutdoors2932 3 жыл бұрын
I started using the heat shrink on my hooks before I ever knew about the nocturnal guys… it’s awesome at first I was using electrical tape but I didn’t like it. Also been buying most my beads at hobby stores cuz well why not
@bradstrope9115
@bradstrope9115 3 жыл бұрын
Saving the best for last. I would have never thought about using flex seal on a net to rubberize it.
@tech4172
@tech4172 3 жыл бұрын
It would be cool too see you make a fishing cart out of metal or pvc would love too see what you can come up with if u could make it a budget project. Thx for all the great vids
@michaeltaylor4984
@michaeltaylor4984 3 ай бұрын
The magnet hack is the bomb
@mikef6948
@mikef6948 3 жыл бұрын
Dayummmm , I'll be getting me some Flex Seal tomorrow !!! That idea was ummm AWESOMER than AWESOME !!!!! ;/ lol
@migratorygame7400
@migratorygame7400 3 жыл бұрын
Deffinetly gonna fix up the fishing net!
@michaelkolanda8712
@michaelkolanda8712 3 жыл бұрын
Those gear ties are awesome things!!! I use them for tons of stuff with the boat or fishing. Especially to keep all my rods together when I'm bank fishing or traveling. Those magnets work great on fishing carts or a boat for your tools too, and I've used glow in the dark paint alone with the clear flex seal on some of my fishing bags to kinda waterproof them and make them slightly easier to see when you're out fishing in the dark. I think that you should do a video on your version of a diy/cheaper fishing cart.
@patrickmcdermott6802
@patrickmcdermott6802 3 жыл бұрын
YOU THE MAN!!!
@xaviermercado5639
@xaviermercado5639 3 жыл бұрын
That's what I'm talkin bout. Keep up the great work. Always look forward to your videos 🤘
@FishinNStuff
@FishinNStuff 3 жыл бұрын
Thank you very much its appreciated
@Dbikgiizis
@Dbikgiizis 3 жыл бұрын
I swear, anything I make from a pool noodle or a section of PVC, even stuff you haven't shown, is 100% inspired by you!
@FishinNStuff
@FishinNStuff 3 жыл бұрын
Thank you , I appreciate you watching. I really do
@j.j.clingman4083
@j.j.clingman4083 3 жыл бұрын
Awesome video buddy!! I absolutely love watching your videos so I can find any new ideas that I haven’t herd of before!! Oh and yes you definitely have some that I have not herd of and are such good ideas to do and save money at the same time!!! Awesome video buddy once again!!
@FishinNStuff
@FishinNStuff 3 жыл бұрын
Thank you Sir
@carolinakeeper
@carolinakeeper 3 жыл бұрын
I will 100% be doing the flex seal net. Thanks man!
@davemorgan2340
@davemorgan2340 3 жыл бұрын
Great stuff... again...keep up the good work..
@Miguel.herrera.71
@Miguel.herrera.71 3 жыл бұрын
Super cool brother. 💯
@CatfishandCrappie
@CatfishandCrappie 3 жыл бұрын
Great Tips Keith!! Another Great video!
@theguywitheyebrows
@theguywitheyebrows 3 жыл бұрын
alla these hacks were awesome!! i gotta admit i thought that cover on them hook shafts was just heat shrink and figured i'd end up doin some myself, i thought about that aggressive offset tweak but haven't ever done it, and now i cannot WAIT to go rubberize me a net!! awesome!
@samyonker
@samyonker 6 ай бұрын
Hack number 22. Use a piece of pvc and use it for a mount for ur net to keep it outta the way. Mines on my steering column
@FrankLadd
@FrankLadd 3 жыл бұрын
Thanks! I'm going to use two of these hacks for my fishing stuff!
@catfishinwithcrow685
@catfishinwithcrow685 3 жыл бұрын
Keith I found a hack at dollar tree I now use tooth brush covers to put on my hooked to keep from ending up with a big tangle after the drive home. On the subject of Flex Seal I had several tiny leaks in my flat bottom so I used flex seal to paint it white looks like a newer boat and is dry as a bone after fishing all day. Keep up the great work thanks again
@FishinNStuff
@FishinNStuff 3 жыл бұрын
Thank you brother , I appreciate you
@ernieflynn5124
@ernieflynn5124 3 жыл бұрын
Dang dude your like the McGovern of fishin'. Love your stuff, funny and informative keep 'em comin' bud. I subscibed... twice!!
@FishinNStuff
@FishinNStuff 3 жыл бұрын
Lol thank you fit subscribing twice I appreciate that , Thanks for watching buddy
@theresabassemier9901
@theresabassemier9901 3 жыл бұрын
Another awesome video with some super cool ideas!
@fishin-impossible2992
@fishin-impossible2992 3 жыл бұрын
Summ dang gud ideas thar Keef. Lol Awesome video Brother. Ive put the hest shrink on my hooks and ive flex sealed one of my nets. Thanks for sharing Brother
@FishinNStuff
@FishinNStuff 3 жыл бұрын
Yeah the nets not a new idea I've done that one before too . Thank you buddy
@dbunk9601
@dbunk9601 3 жыл бұрын
Guuuuuump you’re a hot ham genius
@kellyhill4410
@kellyhill4410 3 жыл бұрын
Thanks for the tips in the fishing hacks little bro. 🤜🌟🤛
@chopperhehehe
@chopperhehehe 3 жыл бұрын
Always sticking around 😜 👍👍👍😜🏴󠁧󠁢󠁳󠁣󠁴󠁿🦕🙂🤞✌
@FishinNStuff
@FishinNStuff 3 жыл бұрын
😁
@richardcummings7079
@richardcummings7079 3 жыл бұрын
I'm doing my net for sure.
@joemccarthy552
@joemccarthy552 3 жыл бұрын
Yes sir. Fishing hack for the trolling motor..
@kavak1344
@kavak1344 3 жыл бұрын
Awesome video Keith! annnnnnnd I'm off to the stores now...
@FishinNStuff
@FishinNStuff 3 жыл бұрын
Lol
@garymyers4496
@garymyers4496 2 жыл бұрын
I've got a problem I have not found any of your videos that i didn't like !!!.Thanks keep them coming Good job.
@FishinNStuff
@FishinNStuff 2 жыл бұрын
I don't see a problem with that lol . Thank you for watching em
@rickeggers644
@rickeggers644 3 жыл бұрын
You mentioned the brand of net you use and looked it up and saw the neat lift handle on it. Many of your hacks I know, are designed to save us money. I got the idea of putting weed whacker on my net to aide in lifting up a big catfish. Works quite well and you can get one on ebay for @ 10-20 bucks. Enjoy your videos!
@FishinNStuff
@FishinNStuff 2 жыл бұрын
That's a great idea , you care if I try it out
@jeffarmstrong9324
@jeffarmstrong9324 3 жыл бұрын
I’m using the brush on Flex Seal for keel protection on the kayaks.
@FishinNStuff
@FishinNStuff 3 жыл бұрын
Did it work good
@jeffarmstrong9324
@jeffarmstrong9324 3 жыл бұрын
@@FishinNStuff so far, so good. I applied it fairly heavy and let it cure for a couple days.
@paulhuval
@paulhuval 3 жыл бұрын
You can also get a water bottle and freeze it to put in your live well to keep the water cooler through out the hot summer day
@gonefishn1975
@gonefishn1975 3 жыл бұрын
Great hacks! always enjoy the hacks, Keepem videos coming.
@RjNomar27
@RjNomar27 3 жыл бұрын
kinda wished I seent this before I bought my fishing net for the boat. That flex seal "flex" was too damned cool not to use. Now I want to get another net just to do the hack!🤣
@carterscustomlures675
@carterscustomlures675 3 жыл бұрын
Thanks for the Hacks they always come in handy 🎣🎣
7 NEW fishing Hacks
17:12
Fishin N Stuff
Рет қаралды 458 М.
Fishing Hacks ( you never seen before )
10:41
Fishin N Stuff
Рет қаралды 158 М.
Tuna 🍣 ​⁠@patrickzeinali ​⁠@ChefRush
00:48
albert_cancook
Рет қаралды 148 МЛН
She made herself an ear of corn from his marmalade candies🌽🌽🌽
00:38
Valja & Maxim Family
Рет қаралды 18 МЛН
BAYGUYSTAN | 1 СЕРИЯ | bayGUYS
36:55
bayGUYS
Рет қаралды 1,9 МЛН
7 Genius tips that you should know right now!
30:39
Otodidak7
Рет қаралды 1,1 МЛН
20 1 dollar fishing Hacks
10:02
Fishin N Stuff
Рет қаралды 257 М.
I NEVER Wanted to Find This While Fishing... (Sad)
9:24
618 Fishing
Рет қаралды 85 М.
8 Fishing Hacks ( you'll find useful  )
10:54
Fishin N Stuff
Рет қаралды 391 М.
10 Ingenious Fishing Secrets & Tricks That You Will Use Everyday!
16:46
FRESH FISH CHANNEL
Рет қаралды 350 М.
Testing The Most Popular Fishing Knots!
5:05
Tom Rowland Podcast
Рет қаралды 200 М.
New Fishing Hacks
20:27
Fishin N Stuff
Рет қаралды 279 М.
SIMPLE Fishing Hacks that's very Useful (2024)
11:27
HOOK with knots
Рет қаралды 853 М.
DEBO'S 8 Favorite Bass Fishing Lure Hacks
11:24
MONSTERBASS
Рет қаралды 108 М.
Fishing HACKs ( To save you money )
12:21
Fishin N Stuff
Рет қаралды 456 М.
Tuna 🍣 ​⁠@patrickzeinali ​⁠@ChefRush
00:48
albert_cancook
Рет қаралды 148 МЛН