tree of life 21"..scroll saw project.

cut out on oak,I think 🤔 with a pegas 5 spiral blade, 21" across.
stained with linseed oil and a little spray varnish to finish..
pegas spiral blade..
www.ebay.co.uk...

[@lenshandcraftedwoodsigns6033]

Looks great. I have made a bunch of them similar to yours. Mine are oval with a hanger at the top. I shape mine differently and sand differently. I do like the router you did on the edge. Most of mine are on a 8 1/2 x 11 sheet of paper, and a lot of them go as gifts. The largest I made was a 2 foot x 3 foot out of cedar painted exterior gloss black as it was going to hang on their front porch. I also have a couple videos on them.

[@fishtank5050]

@lenshandcraftedwoodsigns6033 thank you Len,just watched your videos the first tree was a beast of a thing ,that's a good size..turned out great..👍

[@lenshandcraftedwoodsigns6033]

@@fishtank5050 Thanks for watching. They make great wedding gifts.

[@carlgrigg]

My tatty old workshop door has a new look with a very nice window made from the top of an old dressing table found in a skip. Thanks for the inspiration and the demonstration looking forward to exploring your channel further.

[@fishtank5050]

@@carlgrigg excellent, love a bit of recycling 😁👍

[@AyupStuggy]

That's a beautiful piece of work, thanks for showing us. I've just ordered the blades via your link. Thanks for that too :)

[@fishtank5050]

@AyupStuggy thank you ,spirals take a little getting used to and folk either love or hate them, I don't use anything else now. 👍

[@DaveDigger-g7g]

Looks amazing, I found the same template and used a 1.2 meter oak table I picked up on marketplace. Thanks for the inspiration. 🙂

[@fishtank5050]

@@DaveDigger-g7g excellent I'm always looking for free wood..🤣

[@erickchapman2123]

Can I ask Where you found the template ?

[@DaveDigger-g7g]

@@erickchapman2123 I just googled ‘tree of life template vector ’ I was trying to find one I liked and came across that one, may have been of shutterstock.

[@Amy_McFarland]

This is absolutely beautiful!

[@fishtank5050]

Thank you 😊

[@jamesanderson3088]

Wow! I haven't seen anice slab of oak like that in a while. Wonderful project. The shaping really makes it look great.

[@fishtank5050]

Thanks James I'm happy with the end result, I've only used pine and fencing wood on previous projects, the oaks really nice,I got given two 7ft tables for free, I love free wood..🤣👍

[@thelegogingerproductions]

looking good i bought a scroll saw sunday so i can get started on some of these great projects cheers

[@fishtank5050]

Nice one. just take your time and enjoy 😁👍

[@farscape3100]

imagine if you had some thing like that as a back to a chair, but as it is its wonderful

[@fishtank5050]

Cheers Simon, now a chair backer would be a cool project 👍

[@freedomforever8168]

Wonderful, will try to follow everything,wish me best of luck.

[@fishtank5050]

Thank you I've plenty to look at 🤣👍

[@davidjolley2669]

Nice work! ,hope they love wedding present!

[@fishtank5050]

Thank you, yes more then happy, plus I put their names and date on the trunk..😁👍

[@rafiuddinAphy-bg9sw]

great idea.. Amazing

[@fishtank5050]

Thank you I appreciate your comment 👍

[@fredmeyer3063]

Beautiful work! The wood kinda looks like beech to me, but I'm no expert.

[@fishtank5050]

@@fredmeyer3063 thank you I appreciate your comment 👍

[@KerfMan]

Wow! Great scroll saw work Shane! Tree of Life came out Awesome! 👍

[@fishtank5050]

Thank you Vinnie I appreciate your comment 😊

[@kreardon16]

Love ur work Please keep posting

[@fishtank5050]

Thank you 😊

[@brieun]

Beautiful work

[@fishtank5050]

Thank you 😊

[@Nowayjose-vd1wm]

Beautiful ❤

[@fishtank5050]

Thank you 😁

[@martinkenny9384]

Very nice piece

[@fishtank5050]

Thank you Martin 😊

[@daviddavis6065]

Fantastic job 👍

[@fishtank5050]

Thanks David 👍

[@insidemyshop]

Very nice work!

[@fishtank5050]

Thank you 😊

[@ianm398]

A bit of machine wax on your scroll saw table should help with moving the wood ..even put a bit on the back of the wood as well .. Burning the names on with a pyrography machine would make the letters stand out good .

[@fishtank5050]

It definitely needs something for the next time🤣,I've looked at those pyrography machines ,it's got my interest, some fantastic artist using them,another toy on my list..🤣👍

[@ianm398]

@@fishtank5050 Ive sent you a link to the 1 I bought ..very easy to use ..Easy to change nibs as well ..ive done loads of stuff with it ..I use graphite paper to transfer images then burn away ..very easy to get into and countless images on the net to do ..burns plywood and pine no bother although the pine you need to do a bit of sanding first before you do image ..I bought one of those cheap scorchmarker pens to try but they were pretty useless so bought Ammonium chloride and made my own solution and that worked pretty good although you need to have stencils made to do it

[@ianm398]

Think youtube are taking the link down ...the one i got is a Preciva 23W wood burning kit

[@fishtank5050]

@@ianm398 thanks Ian I've purchased a cheap thing for now the one with the wires in the end, just to see how I go..I've watched loads of videos, some fantastic artist using them .carbon paper and trace works for me..😁👍

[@MA-pt6nz]

Lovely. Beautifully made. I'd like to try making one myself. Where did you get the drawing of the tree from? Is there a pdf perhaps? Thanks for sharing.

[@fishtank5050]

Thank you,I've had a search but can't find it now..but search online for tree of life silhouettes there's plenty to go at..Good look 👍

[@KurtMontiforte]

that's really nice, where can i get that print?

[@fishtank5050]

Thank you , search tree of life silhouettes online plenty to go at 😁👍

[@philipdavison4066sawdust]

Hi mate I do like what you have done and I keep looking at having a go at it but because I'm a new scroller i don't think that I'm confident enough. How long did it take to get it done many thanks Keith

[@fishtank5050]

Thanks keith I'm more a router then a scroller but I'll give it a go 👍time wise it's hard to say, I'll do an hour one day and maybe an hour+ on another day.ive never timed myself and just enjoy the hobby..😁👍

[@philipdavison4066sawdust]

@@fishtank5050 I'll have to pluck up the courage and have a go because it looks really good. Thanks for the video, I'll keep looking at it as i go along. Once I've found a good piece of wood I'll take pictures and let you know how it goes thanks again 👍👏

[@fishtank5050]

@@philipdavison4066sawdust definitely give it a go..I get wood from free items sites on Facebook if someone throwing a pine wardrobe out I'm in like a flash ideal for learning with..I've a Facebook page called shedcrafts with Shane send me some photos in messenger when you complete a project 😉 facebook.com/shedcraftswithshane

[@bibhashnandi3611]

❤❤❤

[@fishtank5050]

Thank you ...😁

[@Nowayjose-vd1wm]

Would be a neat feature if you were to "finish " the back side, making it 2 sided

[@fishtank5050]

Definitely, however it's for the wall so not needed on this occasion 😁👍

[@erickchapman2123]

How can we get the template?

[@fishtank5050]

@@erickchapman2123 search tree of life silhouettes online plenty to go at 👍

[@eogoneill]

Do you do any Triquetra,

[@fishtank5050]

I've made one before and it's on my shed..I've also made a cross and a clock ,I think the celtic or gothic patterns are cool and intend to do more..👍

[@eogoneill]

I love them but they can get a bit complicated..

[@fishtank5050]

@@eogoneill they do look cool 😎

[@thelegogingerproductions]

waiting for pegasus no5 to arrive

[@fishtank5050]

Excellent , only blade I've used so far..😁👍