FiTech Total Package | ScrapStang gets Fuel Injection!

  Рет қаралды 3,660

Rookie Pilot

Rookie Pilot

Күн бұрын

Special thanks to FiTech for sending this kit ! This will bring ScrapStang to a different level!
patreon.com/Ro...
ROOKIE MERCH: kmpaint.shop/c...
www.buymeacoff...
Some people have also asked if I have a wishlist, so here you go!
www.amazon.com...
Instagram: ​⁠@rookie__pilot
Rookiepilot66@gmail.com
Angel Robles
1501 S Cherrybell Strav
#27794
Tucson, AZ 85726

Пікірлер: 62
@rockercover
@rockercover 5 ай бұрын
Fuel today. (Vaporization / boiling point was affected). What a topic you mentioned. Recalling, (memory), when our state legislated unleaded fuel, along with octane levels. (When I noticed fuel delivery trouble). One industry changes, (gasoline producers, due to a gov. regulation - lead deletion, octane reduced), the automobile engineers did not change the fuel delivery systems (no retrofitting of existing engine parts), at least not right away). (Years later - early renditions of TB-FI on some passenger vehicle, GM engines)… Got mechanics scrambling for answers. Thanks for memory revisits with your builds. 👍👍👍
@kirktruman6707
@kirktruman6707 5 ай бұрын
Damn Angel I really like your excitement when it comes to car parts. 😮
@rookie__pilot
@rookie__pilot 5 ай бұрын
Thanks!
@wolfthornhawkridge5705
@wolfthornhawkridge5705 5 ай бұрын
I like the FiTech guys, very approachable and willing to chat with you.
@gerrywinzor1103
@gerrywinzor1103 5 ай бұрын
I think that fuel tank might provide more structure than the frame
@notimportant5205
@notimportant5205 5 ай бұрын
I'm sure your gonna get a lot of advice. I just installed FiTech Ultimate LS. 1. watch all of their videos for your model 2. don't rely on self learning. Go in and setup your timing and fuel curve on your own or you may wind up with a base line that is WAY too lean. 3. Pay close attention to how FiTech sends the initial burst of fuel when you turn the key on. I found it was too much gas once the engine was warm. Had I not watched their videos on tuning (others have posted valuable content too) I would have never achieved the success I have so far. Hope your throttle body woks as well as my rail system. So far I'm a fan of FiTech systems. Their tech support has been pretty good; but their videos provide way more insight. Good luck and I'll be rooting for you...
@rookie__pilot
@rookie__pilot 5 ай бұрын
Thanks for the tip! I agree that their videos are very informative! Will definitely be looking at them again and again
@Ride_Runner
@Ride_Runner 5 ай бұрын
This car is getting cooler by the video.
@rookie__pilot
@rookie__pilot 5 ай бұрын
😎😎
@MJ-fh8fw
@MJ-fh8fw 5 ай бұрын
One of my all time favorite cars, I'm glad I found this content.
@josephmatuszak3855
@josephmatuszak3855 5 ай бұрын
I love the consistency that EFI can bring. Just plz don't put digital gauges in the car. Hide the controller in a center console or something close by.
@rookie__pilot
@rookie__pilot 5 ай бұрын
Roughly what i was thinking!
@Null7Mereel
@Null7Mereel 5 ай бұрын
Im swapping a FiTech go classic black onto my 67 Impala this year with the full Tanks Inc setup just like this, can't wait!
@rookie__pilot
@rookie__pilot 5 ай бұрын
Hell yeah!
@DemonViewLLC
@DemonViewLLC 5 ай бұрын
Wait, did someone say potato's? Sorry, the Irish part of me got excited for a second. That hand held controller looks like a mini game station. Now I'm wondering if it could be ported.... (this is why I shouldn't be let near cars....).
@rookie__pilot
@rookie__pilot 5 ай бұрын
Ported 😂
@MoonMoon-rm2vg
@MoonMoon-rm2vg 5 ай бұрын
Someone is gonna get Doom running on that 😂
@DemonViewLLC
@DemonViewLLC 5 ай бұрын
@@MoonMoon-rm2vg Aye, it seems to be the first game everyone ports onto something.
@roymurray6374
@roymurray6374 5 ай бұрын
My Brother-in-law's El Camino runs a FiTech system. The thing that's hard to get used to, is not needing to pump the gas several times to start the engine.
@1944chevytruck
@1944chevytruck 5 ай бұрын
Awesome! CONGRATS!
@rookie__pilot
@rookie__pilot 5 ай бұрын
Thanks!!
@Andrew-jh5uv
@Andrew-jh5uv 5 ай бұрын
Awesome Angel now we are talking 👍👏
@KevCampbell
@KevCampbell 5 ай бұрын
Love, love, love this as a great drivability upgrade and a perfect fit for the Scrapstang ethos.
@jeffosim8789
@jeffosim8789 5 ай бұрын
It’s cool you got what you wanted, but I would have stuck with a carburetor it fits the theme better , and to me it would be easier and simpler . But I hope it works beautifully for you. 😊 1 question, it comes with 1 O2 sensor how do you go about setting up if you have dual exhaust? Would you just read 1 bank and it would just do the same fuel trims on both engine banks? Just curious.
@rookie__pilot
@rookie__pilot 5 ай бұрын
Carb was the original direction, but with all the heavy modifications and upgrades done i felt this also fit the theme!
@NikMitchell
@NikMitchell 5 ай бұрын
gotta say, my initial opinion on Patreon of the look at the color on that unit was tepid, but seeing it in the context of the rest of the car? Oh yeah, baby, DIS GON B GUD. Love the full setup they've sent your way - didn't realize how important something as simple as the gas tank was so important in the FI dept. Good stuff.
@DannerPlace
@DannerPlace 5 ай бұрын
This is gonna be an awesome build, can't wait...
@johngrimley3523
@johngrimley3523 5 ай бұрын
Looking forward to seeing that FiTech system run:)
@rookie__pilot
@rookie__pilot 5 ай бұрын
RIGHT
@micahrichey5335
@micahrichey5335 5 ай бұрын
I had a 94 GMC SIERRA with a 5.7l and a TBI. I wish I would have never sold it.
@mrwest5552
@mrwest5552 5 ай бұрын
into la carne y papas AlRIGHT ! i'll fire up the grill, Es Viernes !
@rookie__pilot
@rookie__pilot 5 ай бұрын
Exactly!
@Boostin1503
@Boostin1503 5 ай бұрын
Carne asada?! I'm there!
@mrwest5552
@mrwest5552 5 ай бұрын
@@Boostin1503 - si con salsa y Modelo Especial.
@Boostin1503
@Boostin1503 5 ай бұрын
@@mrwest5552 now you're just teasing. Meet up at the stable!
@mrwest5552
@mrwest5552 5 ай бұрын
@@Boostin1503 - no teasing allowed.
@sergioacevedo2874
@sergioacevedo2874 5 ай бұрын
Any reason you went with a carb efi versus a intake with efi at each cylinder. I have a holley efi on my 64 convertible but wish I had gone with the whole intake system so it would dump fuel at each cylinder.
@rookie__pilot
@rookie__pilot 5 ай бұрын
Since I was already headed carb direction with the intake, I thought it'd be the easiest way to convert. + I've had my eye on this kit for YEARS so it's perfect timing! also.. can you email me your shipping info for the Knipex, I think you already sent it but it got lost in translation. THANKS!! rookiepilot66@gmail.com
@sergioacevedo2874
@sergioacevedo2874 5 ай бұрын
@@rookie__pilot that totally makes sense I am curious to see how it compares to my holley because it’s nice but has a lot of weird quirks im troubleshooting but according to the holley forums it’s normal. The sniper 2 is the new improvement supposedly but I don’t want to spend another grand “upgrading” lol. Definitely looking to see how your unit turns out. And also how that other project go. You got this! And thanks I actually had not sent the info thanks for the reminder just emailed it to you.
@thekatmann9730
@thekatmann9730 5 ай бұрын
Dude!!! This looks so great! I can't wait to see that unit get installed.. the rear tires are TOAST!! ((by the way... looks like some 'immature person' went a little 'ham' with a black sharpie in the Stable)) hahahaha
@bobuncle8704
@bobuncle8704 5 ай бұрын
So crazy. Love it
@robaxelsson530
@robaxelsson530 5 ай бұрын
keep us posted!! FItech has a long bad rep with customer service and failing units. I know they sent this unit, im sure they may have "fixed" the issues (ecu, controler, interface, connections)... if you encounter any failures or short comings.... please post. Holley's sniper fell into the same situation....the sniper 2 apparently seems to most bugs worked out...let us know..
@philh9238
@philh9238 5 ай бұрын
I hope you have more luck than I did when I installed mine. I got tired of the junk sent it back bolted on an edelbrock 4 barrel on my 70 dodge dart
@robertlugo3388
@robertlugo3388 5 ай бұрын
What a great kit. Looks so complete. I'm looking forward to the install. Is there a discount code for viewers that might be interested in one for themselves?
@rookie__pilot
@rookie__pilot 5 ай бұрын
Great question, I will see what we can do!!
@robertlugo3388
@robertlugo3388 5 ай бұрын
Hey Angel, are you excited?
@rookie__pilot
@rookie__pilot 5 ай бұрын
Only ALOT
@flyaz11
@flyaz11 5 ай бұрын
How much gas do you actually save by switching to a EFI Fitech?? What if you did the 69 mustang kit that way you get 20 or 22 gallon gas tank .
@Boostin1503
@Boostin1503 5 ай бұрын
I think you found yourself a nice accent color for parts around the car. Looking forward to seeing the car run by the end of the month. :paranoid:
@rookie__pilot
@rookie__pilot 5 ай бұрын
Thats actually a GREAT idea with the accents! And oh boy i sure dam hope it runs by the end of this month!
@Mister006
@Mister006 5 ай бұрын
clean the backs of those intake valves!
@samuelvera9449
@samuelvera9449 5 ай бұрын
well said
@tommcl8548
@tommcl8548 5 ай бұрын
👊👍
@philh9238
@philh9238 5 ай бұрын
I’m not a fan of rubber fuel line even if it is stainless. It’s to bulky I bent all mine out of 3/8 nickel copper line
@djparn007
@djparn007 5 ай бұрын
👍👍
@magikahn
@magikahn 5 ай бұрын
Thatz not scrap... Aftermarket-Stang? Unique indeed...
@jamiegroves1761
@jamiegroves1761 5 ай бұрын
😎🍺👍🇦🇺
@karenmailenny
@karenmailenny 5 ай бұрын
FIRST
@rookie__pilot
@rookie__pilot 5 ай бұрын
Holy moly 😂
@Boostin1503
@Boostin1503 5 ай бұрын
That's not fair, i'm sure you literally saw when it was going to be done processing. LOL
@ulichy5
@ulichy5 5 ай бұрын
Angel is going to be flying up and down mount lemon 💨💨
@rookie__pilot
@rookie__pilot 5 ай бұрын
EXACTLY
EFI Fuel System Conversion | Scrapstang x FiTech
23:40
Rookie Pilot
Рет қаралды 3,9 М.
HF Sandblaster 101 | 5 Year Review / Test...Scrapstang
21:18
Rookie Pilot
Рет қаралды 1,1 М.
Mom had to stand up for the whole family!❤️😍😁
00:39
Smart Sigma Kid #funny #sigma
00:14
CRAZY GREAPA
Рет қаралды 92 МЛН
Triple kill😹
00:18
GG Animation
Рет қаралды 11 МЛН
ЛУЧШИЙ ФОКУС + секрет! #shorts
00:12
Роман Magic
Рет қаралды 20 МЛН
Engine out...AGAIN | CVF Racing Dress Up Kit
19:02
Rookie Pilot
Рет қаралды 4,2 М.
Heidts Levels Of High Performance
5:39
Heidts Suspensions
Рет қаралды 58 М.
Fitting The NEW Cab & Welding the Front End! | Franna Crane Project | Part 24
44:56
Cutting Edge Engineering Australia
Рет қаралды 437 М.
FITECH EFI force fuel install on small block chevy will this work?
36:41
Speed Specter Garage
Рет қаралды 28 М.
Chainsaw V16 swapped Lada - first drive
12:49
Garage 54
Рет қаралды 487 М.
My Longest Flight Yet! | 187 mile Solo XC
23:48
Rookie Pilot
Рет қаралды 1,6 М.
T5 Manual Parts | BLOWN UP 5 Speed...SCRAPSTANG
16:23
Rookie Pilot
Рет қаралды 2,7 М.
EFI Conversion or Carburetor? Pros? Cons? Do it, or wait?
19:04
Automotive Adventures With Austin
Рет қаралды 3,2 М.
5.0 Final Stages...Kinda | Scrapstang
21:10
Rookie Pilot
Рет қаралды 4,4 М.
Mom had to stand up for the whole family!❤️😍😁
00:39