Fix a Flat - Replacing your bike's rear tube.wmv

[@remywelling7223]

This the best rear wheel video for fixing flats that have ever watched. Thank you

[@maryakidstv7459]

This is the best inner tube change video on youtube

[@codyrodriguez5133]

I watched a couple ‘fancy’ videos for changing a tube since I am new to cycling, but none of them made as much sense to me as this one. This was great, thank you!

[@9023gregb]

I went 3 years almost 11k miles with no rear flat. Honestly I was rusty. This was perfect help. Thanks!!!!

[@graemeland8381]

Excellent video I knew how to do it but hadn't cycled for four years and was dreading trying to replace the tube in my rear tyre, with your help, my bike is back on the road, thankyou!

[@mnbrittle487]

Thank you for posting this video. It's the best I've seen on KZbin with regards to how practical and comprehensive your instructions and pointers are .... right down to how to lay the bike on the ground and when is a good time to get the tools out. Running a cloth along the tyre is a great tip to avoid injury. This step is essential to prevent another tube going flat if the debris is not removed. Much appreciated video!

[@EricRamos42]

Thanks. You made putting on that tube super easy!

[@FantmVirus]

Great video - thanks for posting. Had my 1st flay this morning - front tire but since I watched your videos BEFORE I had the flat no worries! Appreciate you posting this and explaining everything.

[@walthaus]

Great Video! This was an exceptionally helpful video. It has been two years since I last tried to change the rear tire of my bike. It was a battle that ended with me piercing my fingernail with the spoke. This video completely demystified the processes, and am I now happily riding my bike again. Thank you!!!

[@betterthanayard]

Thanks man! Was too scared to DIY the back tyre... until now. Ordering replacement tube forthwith!

[@karenwickboldt6750]

Thank your for these amazing tips!! It changed my tire with ease thanks to you.

[@igouanagirl]

Best Video, simple to understand

[@glennbogardus9140]

This video is everything that's good about the internet.

[@elijahatlas5203]

pro trick : you can watch movies at flixzone. Me and my gf have been using it for watching a lot of movies these days.

[@cullenlawrence7794]

@Elijah Atlas Definitely, been using Flixzone for years myself :D

[@zachariahkendrick3078]

@Elijah Atlas yup, have been using flixzone for since december myself :D

[@kk-su1mx]

Best video to replace a flat

[@icupeed]

Excellent video, good clear instructions.

[@billycolquhoun4264]

Awesome... thanks for posting this dude!

[@funkcore]

Excellent video, thank you!

[@thememefinder-pk2co]

Helped a lot thanks. Appreciated

[@donaldjohnson9861]

Rick, awesome.

[@nathanhaber]

Great instructions

[@carinamaren7779]

very informative thanks!

[@vincentobrien5433]

Thanks! this was very helpful!

[@warrenchu6319]

@1:48 "Take the tire lever and go underneath the bead..." The problem with wheels that are tubeless-compatible is the tire bead sits tightly on a rail inside the rim and it's impossible to slide the tire lever underneath it and hook onto it. What you need to do is push the bead off its rail onto a center channel area that will leave a gap for the tire lever to go underneath the bead. Sometimes, however, the bead sits so tightly on the rail that you just can't budge it - not even with a tire lever. The solution? Apply a thin coat of grease to the inside of the rim when you first install the tire. The bead will slide off easily just by pushing on it with your thumbs. Slide the bead off its rail on the whole rim on both sides and you won't even need a tire lever to remove the tire. Do this BEFORE you have to fix a flat on the road next time.

[@b2bmail]

Thanks, worked like a charm!

[@asaintinwaiting]

I learned the hard way to not use plastic tire irons (they break; at least mine did). Get good forged steel tire irons and save some grief.

[@cyclefitness]

Thanks ... glad to help..

[@tom_odon]

Thank you very much!

[@nooksak1]

thanks for sharing!

[@patsfan971]

Thank you!!

[@barblex25]

Thanks!

[@elizahhoward6810]

People always do it with their bare hands I'm too weak or something I've never been able to do it without levers

[@SquaredCircle777]

excellent vid

[@davidmartin8155]

Very helpful

[@nrmb7555]

Is the co2 cartridge garbage after that or is it reuseable?

[@allanallen1835]

Just buy a co2 recharger it’s another co2 cartridge you fill the empty one up with 😉

[@catherinewind-muro8722]

Is it the same way when you change an electric rear bike tube? My tire size is 20 x4.

[@nathaniellima6833]

yes

[@hussainafzal9076]

love you

[@shyamfootprints972]

What’s with that fat hub on the rear wheel?

[@cyclefitness]

That is a Powertap hub. It measures how much power you are producing. www.saris.com/post/blog-next-level-riding-why-train-with-a-power-meter

[@oodles86]

why doesn't my tube valve pop out of the rim?

[@balatix9716]

I don't have a brake caliber and if I do its stuck

[@stephenkenny5550]

You remember what gear it was on right! - NO??

[@timmyles314]

I'm almost believing that i can do this

[@thomasnodine9188]

“Some are easier than others”. I got that other. ....Frustrating.

[@humanityhelper23]

Same can't get the tire on now!

[@THATHATSALLFOLKS]

flip the bike upside down

[@bobcooper9108]

On an inexpensive bike, OK. But, on a nice bike you'll scratch up your seat, handlebar, and whatever gadget you might have on your handlebar. And God forbid you forget to remove your bike computer! Yikes!

[@JudeTheYoutubePoopersubscribe]

@@bobcooper9108 yup, can't flip my ebike upside down obviously because of the big display on the handlebars.