FIX- Canon B200 error still after cleaning printer head- This fixed it!!

[@kathycresswell8353]

Thank you for the tip in your video! I had problems with the printhead on my MG7120 a few years ago, cleaned it, and got it working again. When an error came up last week saying I had the wrong printhead, I skipped the cleaning and ordered a third-party printhead off Amazon. Once I swapped out the old one with the new, I was surprised to get the B200 error because I knew the new one was clean. Lucky for me, I found your video, followed the tip at the end, and it worked!

[@paulwilliams2162]

Thanks very much. Followed this method. Powered up when the carriage was in the parked position but with all covers open. As soon as the carriage moved I shut everything and the printer reset correctly. Thanks again.

[@TippyPuddles]

Mine was in the "parked" position, so I moved it to the center, then plugged it in, closed it up and presto, it's working.

[@saltyshambles]

I know this video is from 4 years ago but man did it just save my butt! I wish technology companies would just come out and help fix it like you did instead of letting us all struggle! SO THANK YOU!

[@quattrocchi71]

Ciao ho smontato la testina pulita asciugata ma dopo qualche ora il problema si è ripresentato,a te ha funzionato questo di chiudere tutto appena parte

[@shaaronie]

@@quattrocchi71 You will need to make sure the print head is not in the starting position. I unplugged the printer and manually moved it far to the left. I then powered it on with the lid open; I believe that is the key. Once it starts cycling, close the lid and that did it for me. Good luck to you!

[@eunicejanzen9061]

This was the ONLY video where the fix actually worked AFTER removing the print head, cleaning it etc. Thanks to you and whomever was the original person that figured it out.

[@joebarfield1525]

Thank you so much for your help. I really admire the fact that you recorded and posted this video to help others even though you had not done videos before or posted on KZbin, you still wanted to help others who are stuck like you were. Your the kind of selfLESS person that this world needs more of today. Thank you again.

[@RedRoyce]

Wow, Thank you! God bless

[@shaaronie]

Fixed! I can't believe it! I bought three printers because of this error. The print head replacements or repair were about the same cost. I was determined not to buy a fourth. And now I am going to have three working printers! Thank you and God bless you too!

[@olgapanchina8169]

That's amazing . I did all cleaning, resetting and other stuff, and it did not work. You found the way to reset the error. The way the Canon guys are keeping in secret. Thank you a lot.

[@cosmicpickle6562]

Well THANK YOU THANK YOU THANK YOU! I viewed numerous other videos about clearing/fixing this B200 error. Only one other was really helpful in that it showed all the steps on exactly how to get the print head out, etc. But once I had seen how to get the print head out and all the other steps (including buying and installing brand new ink cartridges although the old ones still seemed fine), I was still getting the error. The 'fix' was the trick that you showed as far as powering up the printer with the various parts still open, then quickly closing them during the power-up-and it worked! My next step was to buy a new print head (which I don't really want to do) because I need a printer like the Pixma 922 to print on CDs and DVDs (a feature you just don't find anymore, sadly in printers). THANK YOU AGAIN! -Gary

[@mrsmith2219]

This WORKED for my MX870!!! I cleaned it first and then tried this. Thanks Red Royce, you are a life saver!

[@MM-ri6oe]

OMG, You have no idea how much of a True life saver. I Talked my aunt into buying a cheap ink and she doesn't use her printer that much. She is a person who plays the Blame game on everybody Even if it's 10 years down-the-line you may have touched her printer one time in your whole life and its your fault. Anyways Every time I knew they she wasn't going to be home I would sneak over and work on this printer and couldn't get rid of that code and she had never seen it. Finally your video have saved the day. Thank you so Much

[@dannyteebone9233]

Sounds like a real gem! I hope you are at least in her will or something to deal with that all the time! Lol

[@shaaronie]

Hilarious! A funny story to go along with my happy ending to my printing nightmare! Today is a good day!

[@pepperdeez]

I spent 3 hours cleaning and trying to fix it. I decided it was time to buy a new one. I started looking on KZbin for a review for a different printer and decided to watch this video as one more try to fix the problem and omg this solved the problem. Saved me the 250 dollars and let me keep this printer i love. Thank you so much. Words can't tell you how thankful I am

[@buddybyrd3870]

Thank you!!! Owned my Canon MX922 for at least 3 or more years then suddenly got the dreaded B200 error message. Referred to the owner's manual which was useless! Watched several videos verifying the B200 message was nothing more than a clogged printhead. Removed the ink cartridges and the printhead and thoroughly rinsed the printhead. Let it dry. Thanks to YOUR video I only rinsed the printhead once then aligned it as you indicated before turning on the power. Works great! (3/14/2021)

[@nathanielmayo4950]

Thank you, I've watched dozens of videos on the B200 error that popped up on my MX922 yesterday, tried soaking the print head on iso alcohol and cleaning it, etc. This worked! Thanks again!

[@steedcolliss5534]

That extra final thing about closing everthing during reboot is what what needed! Thank you!!!

[@guygadbois8989]

This worked for me when none of the other hard reset tricks worked. I don't know why it should work, but it does. Thank you for passing this along.

[@julialuck8121]

Thank you so much!!! I did have to add one step, I had to push my printer port all the way to my right, then close the doors when it moved, then it worked!!! Doing it without doing that didnt work, but I would have never known without your video. You have a nice narrator voice too!!!! HAVE A WONDERFUL DAY!

[@dautran6829]

Omggg. Your comment save my printer. Thank you so much. I pushed the printer port to the right and close completely then it work.

[@dannyteebone9233]

What do you mean by the printer port? The actual print head that moves you mean??

[@robn8096]

Feb 2021: Your KZbin helped me get my printer working again. Thanks red royce. Much appreciated.

[@malinaterry25]

I CAN KISS YOU!!!!! AHHHH! THANK YOU!!! same story as you. I have cleaned the head everyday for 5 days now. hot water, alcohol, every thing. tried cleaning the sensors, tried rebooting... on an on an on. I dont have money for a new one but I researched some anyway. This printer is 7 years old, but only used like 10 times a month. I just couldnt believe this was the end of its life. But your trick worked. THANK YOU!

[@abcd9964]

Thank you soooooooo much! I have been messing with this thing for two weeks, trying everything to no avail. Stumbled across your video because of your title (after cleaning the printhead). I'll be darn, it works! Thanks again, Red!

[@corvette1203ss]

Well you helped me I almost threw out the printer your trick worked like a charm thanks for taking the time to make the video. You saved me $300.00 maybe more Thanks Ron R

[@geobold8769]

yesss! just fixed my b200 error. I tried it 5 times, no luck.. then the last time, i was about to order a new print head and looking for the correct part number, I moved the cart to the left, but just before it slides into the printer. Plugged in the power, switched it on, closed everything during start up... and it's working just fine!! Just printed my nozzle test page and looks perfect. So Red Joyce, thanks a lot for posting this video.

[@AR-fx1uy]

THANK YOU!!! No matter what i did I kept getting the B200 error. I came across your video and did the plugging in before I closed the cover and that did the trick. Thank you so much!!!

[@JazzyVR1]

Wow! I thought no way this works, but after cleaning my print heads and still getting the B200 error I thought, give it a shot. And this worked! Thank you so much.

[@dominicklauria8535]

I cleanerd the heads and still got the B200 error message. I followed your instructions and it worked! Thank you! 5/22/21

[@muttmax]

I always look for info online before i try to fix anything. i know a little about a lot of things but this was the best easy fix ever. You the man! thanks for posting this.

[@KH-fk1mj]

THANK YOU!! I DID THE EXACT SAME!! Was VERY frustrated! Upset as I paid a good price on this....if it wasnt for you I would have thrown it out and bought a new one. It was only 18 months old. Glad you did the video!!!

[@sanjaymayar]

Worked! I cleaned the printer heads, still got the B200 error. Tried this trick of closing the lid mid-cycle, worked perfectly. Thank you, sir!

[@davidb69]

Dude, you are my hero, I am extremely tech savy but it never occured to me to do this little trick, thank you so much for recording this and helping out people.

[@timothyleebond]

i think it set up this way to mislead customers into spending more money for repairs

[@Cynethis1982]

I be got darned. I did have to clean my print head. Then I did this twice and working like new. THANK YOU!

[@jocelynpumariega]

Thank you, after 3 days trying to fix this and just like you cleaning it multiple times, this worked!

[@msprisymonroe3208]

OMG IT WORKED. Cleaned print heads first. Thank you soooo much.

[@daniellemaudlin9277]

WOW! Thank you!! What a stupidly simple yet completely non-sesnical fix! I watched several videos before yours and this finally did the trick! Thank you so much for posting and helping your fellow humans! 🙂

[@epacrisimp]

Thanks. My printer is aging but I love it and would rather not have to replace it if I can help it. Your video helped me.

[@Dualforce28]

Thank you so much. I just needed to get the scanner working again. Such a simple fix, but took me a couple of years off and on trying to find it. Must have cleaned the print head a dozen times! You might not be a KZbin star yet, but you have my vote! Thank you!

[@lchakrapani]

Many thanks! This fixed the error after all the other tries including 2 rounds of cleaning the print head and other attempts! Again - many thanks for the simple method, which fixed it and for posting the video!!

[@roberthall1725]

WORKS!!!!! Starting, then closing everything up does work. Many thanks!

[@ArmaSti]

What a PoS printer.. it worked... I didn't clean the head just removed it... placed it back in... left everything open... powered on... 2 seconds into powering on.. I closed everything and it worked like magic... I swear this will be the last canon/ink printer i will be buying.. I'm moving on to laser.. cheers and good luck

[@jlilly8144]

That's completely crazy. I've been trying and trying to figure out how to get this working again after cleaning the heads and it was this. This fixed it. Unreal. Thanks again!

[@44baloney]

I finally got the Error message to leave and the printer looked like it was going to print. Then, the entire printer died. It won't go on again. Any suggestions?

[@missmarie658]

THANK YOU! I cleaned and cleaned. Still didn't work. Bought a new print head from China. Still didn't work. Watched the other guys video, still didn't work. Found and watched yours. Didn't realize I had to close the machine quickly before cycle finished. Now both print heads work! I love this machine! Has lots of added features. I wish China made things to last 50 years like when USA did it's own manufacturing. It is a wasteful country with max product life designed to last less than 3 years and buy again. All those tons of un-recyclable plastic machines setting off toxic gasses as they smolder in the heat, sitting in our landfills and California bans straws and plastic bags. Build things to last. Bring back USA made in America manufacturing and save thousands over the course of a lifetime on just one product alone and clean up our earth.

[@ainsleyarcher5804]

Thank you for sharing this video. I followed your instructions to the tee and now my printer is working. Thank you... Thank you.

[@SharonDigitalVideos]

Thanks You so Much Brother for the SECRET. It worked on mine. Super. I was going nuts with the printer problem for a few days, clean the head, new driver installed, Inks replaced. Still it was not working. Your secret did work. Thanks again.

[@JewishMusicToronto]

I had watched another video from 303 Electronics quickly going through the process, but I do appreciate your breakdown of the steps you went through, and that the KEY was having the print head out during power-on. It may have been shaky, but this was a good breakdown. I just finished running a nozzle print test after removing and putting my ink cartridges back in (didn't even replace them), and all seems good now!

[@loubino18]

God bless - your video made all the difference! I watch a bunch of others, but I used your technique which then allowed for me to run a few built in cleaning functions & she is purring along! Thank you, thank you, thank you!!

[@reisi5049]

Yeah man, I cannot believe it but after doing your instruction, my printer works again. First, it looked to me, that your fix cannot be possible, because it seems to me as a hardware problem. But then I tried it and now I know, that my technical thinking is not always correct ;) best regards and thanks a lot

[@mwpeeples]

thank you....was getting b200 error after many times cleaning the head unit....worked like a charm

[@kristoff99s]

It actually worked on my 14 year old MP560! I love you!

[@RedRoyce]

Wow I haven't look at this video in forever. I'm not a KZbin guy I just made it because it fixed it for me and wanted to help other and it looks like it has for many. Sorry for you that have given this video a thumbs down if it didn't work for you. One thing is you have to have everything open, the print head moved out of the parked (not all the way to the right), power it on and close it all up fast and you may have to do it a few times to get the timing down.

[@DailyKronikles]

Worked like magic! Amazing! Thanks a lot for posting.

[@zoomlink333]

It worked for me after I tried his method 3 times! Thank you so much!!!

[@pamelajaffke3271]

I just tried this and it worked!! Thanks so much.

[@dgalvan123]

Thanks! This worked for me on a canon mx882. Cleaned the print head, still got B200 error. Tried this trick of starting it while opened up, and closing it while it was booting and moving around. Worked!

[@Nurturing2]

You are INCREDIBLY thoughtful❣️ Thank you!!!

[@karinknowles8408]

this actually worked after doing everything else i saw on youtube! thanks!!

[@jenniferhoward1744]

Holy crap this worked!!!!!!! Wow!!! Thanks! You’re a life saver!

[@bethwilliams8004]

Thank you so much! Grateful for you posting this video! It worked for me!

[@pammclaughlin9013]

Thank you so much. A combination of cleaning the printhead and your trick and now it's working.

[@Swaze73]

Thanks.. Not closing the lid before the initial cycle ended was my problem. So this video helped to solve my problem.

[@christhompson200]

Hi....worked for me after a four attempts...did head cleaning ,roller cleaning....so far so good! Thanks!!!

[@manueldeleon8345]

THANK YOU, GOD BLESS MY PRINTER IS WORKING!

[@suemasters2643]

Oh my gosh! It totally worked! Thank you SO MUCH!

[@elyrealtor1810]

Thank you so very much!!!! Like you said, this procedures does not make much sense, yet, IT WORKED!!!! Thanks again.

[@sandBlaster3497]

You are a Genius!! it worked!

[@brendagarcia7403]

Thank you so much I need to print a couple things urgently and after trying everything I found this video and my printer is finally working!!

[@alip.9740]

It worked! Thank you! And that other guy. We'll see if it keeps on going.

[@alip.9740]

Just kidding it went back to that error☹️😭

[@DaretoDream-qe2co]

Hi this worked for me. I was just about to buy a new one having got feed up with the B200 error. Thank you for posting your video!

[@amandaalmond3745]

This worked for my MX892. Thank you!!

[@mehdimaamri8511]

Holy shit i’ve tried everything for 12 hours but your way (idk how the hell is this possible but it worked) Thank you so much bro

[@simonpolk4774]

thank you b200 followed what u said it worked

[@davidwells7046]

It worked for me also. I had installed a NEW print head so wasn't expecting any issues ! Thanks

[@GregoryGuerrier]

Your method worked for us! We followed your directions and it fixed our printer and got rid of the B200 error message. Thank you! 👍🏾

[@arrivalathumanity3481]

Holy cow! This works like a charm! Thanks for so thoroughly explaining this!

[@anasyabdallah6967]

God bless you buddy...I wish I could share you my results. I did the same to I printer somebody gave up on it. After cleaning and changing the cartilages several times still didnt work out. But applying your ticknique...boom it all went in play...my model is MG6450

[@thecritico]

YEAH SOB worked on the first try. THANK YOU. NOW I CAN RETURN THAT POS HP WITH $80 CARTRIDGES THAT GO EMPTY AFTER 15-20 PAGES. I too use after market ink works just fine.

[@hildebrouns8671]

Thank you so much! This trick fixed the B200 error on my Canon MP640. Amazing!

[@simongeorge2244]

Fantastic!! I've been mucking about with this for ages. Your a Godsend Sir 👍

[@mcosmonaut]

Thank you so much!! I tried several other solutions, but yours actually worked. Peace!

[@alexlee1905]

Wow, it works for me. Save me 200 dollars during the COVID-19 pandemic. You are the man!

[@sinclairedavis6397]

Thank you thank you thank you !!’ It worked I literally opened it all up and plugged it up and once it turned on I closed it like you said and boom thank you

[@albertmoore9181]

Than you so much this method work for my printer because this is a very good printer when it operations.

[@FELINHO1]

Thanks, Bud. You're a lifesaver

[@andrenegy1982]

I just tried it and it worked after watching a few other videos prior

[@andrenegy1982]

Thanks

[@borincaleno]

Wow... it worked!! Thanks... you saved me few hundred dollars

[@tonyreis301]

Thank you, mate. Worked for me. Really appreciated you sharing this.

[@mistysimco5608]

Thank you. This was very helpful.

[@sallyjohn8492]

Thank you for this video it helped me a lot printer stared working.

[@dungeonchunks2344]

Thank you SO much! It worked like a charm! your the BEST!!!

[@AbsoluteTunesHD]

Can't belive that this actually worked. Thanks so much :)

[@chuppified]

Thank you! This did the trick!

[@clarepritchard1859]

Thank you Red ! Dug my IT man out of a big hole. Error code appeared after firmware upgrade from 2.040 to 2.050

[@tmmartin50]

Your KZbin presentation skills are a mess, but damned if it didn't work! Thanks! I was about to toss my printer and buy a different one, so you saved me a few hundred bucks!

[@bernardobarrientos3642]

You’ve helped me too. Two times now. I appreciate you making this video. Thank you!

[@moonlite241able]

It worked for me. Glad I watched this video

[@camdoogy]

Thanks for making this video. It definitely worked for me.

[@jrajmo]

wow..that did really work..and i tried a whole bunch of articles and videos before bumpin into this one. thank you!

[@alexfischer5658]

I gotta say , you hacked the secret CANON company machine code , trying to leave printer useres helpless after they properly clean the print head. Moreover, you outdid the other 100 you tube tutorials and postings about this matter, which collectively are useless. I say: right on ! thanks so much , God bless you, too.

[@Fredml]

REPARATION REUSSIE pour ma part de cette manière pour une MG6350. J'ai démonté les cartouches, j'ai ensuite retirer les tetes d'impressions. J'ai laissé couleur de l'eau bouillante du robinet pendant au moins 15 minutes. En dirigeant le jet puissant du robinet sur chaque ligne de la tete d'impression. Cela faisait sortir progressivement de l'encre de l'autre côté. j'ai en quelque sorte passé le jet sur l'intégralité de chaque ligne de la tete d'impression. Et ce longuement jusqu'à ce que l'eau sorte parfaitement claire. J'ai remis la tete d'impression. J'ai ensuite éteint la machine. Pendant qu'elle s’éteignait, j'ai retirer le cable éléctrique. Je l'ai ensuite remis en inversant la polarité. J'ai ouvert le capot, j'ai allumé la machine et dès qu'elle s'allume, j'ai inséré une carte SD, en meme temps que je ferme le capot. J'ai ensuite attendu 30 à 40 minutes. Et magie, le code B200 a disparu. j'ai pu réimprimer correctement de mon ordinateur, par wifi et par carte SD :) voilà, si ca peut servir à d'autres !

[@nancyreid5600]

Thank you Sir. It worked just like you said it would. I agree you were God sent.

[@Jeejeez09]

Wow! Thank you so much! Finally working!!!!!!!

[@sunshineaspirations6318]

Thank you sooooo much for posting the answer to my prayers...This worked when nothing else did. You're the greatest! 👏👏👏

[@gillianarnold468]

Brilliant thankyou. It worked just as you said it would (you have to be quite quick between putting the power cable back and shutting the front) - Wonderful.

[@Chiodi4real]

Yes!!! It worked for me. Thank you so much.