Fix Chevrolet, GMC, Cadillac Cruise Control Issues with Brake Lamp Switch Chevrolet Tahoe Yukon

[@T3xRanger]

This fixed my 07 Escalade. I accidentally installed the switch upside down, which fit perfect, but ultimately has brake lights on all the time, no working Cruise Control and Stabilitrak warnings. Then I reversed it and now the warnings went away, the brake lights only turn on when I hit them and the Stabilitrak warnings went away. Bought my part for about $25. Fantastic helpful video!

[@OmarsGarage]

Sorry for the horrible editing but what matters is that it works 😆

[@paulghilino2906]

Awesome video! This was exactly problem I had on my 2011 Escalade. My cruise control was working only intermittently. $23 for part at local parts store was in stock. Same part number as per your video. Only took me 20 minutes to swap out. You might have mentioned that steel retainer clips has retainer slot that fits in groove, just push it up about a half hole diameter and it pops right off. Reverse to put it back on, place on and slide down half hole to lock it back into place. No reason to bend, pry, or force it off. Test drove Escalade and all works perfect again! Thank you.

[@OmarsGarage]

Thanks for the additional tips…this video is painful to watch as the audio was terrible but it was one of the first videos I edited on KZbin.

[@emmitti]

Just wanted to say a BIG thank you to you Omar. My cruise control stopped engaging on my 2010 Escalade about two weeks ago. I was digging around on-line trying to see potential fixes and came across your "how to fix" video. Decided to give it a try. Ordered the exact same AC Delco part number that you used for my vehicle. Took a while to get the bolt off, due to the retaining clip being so difficult to release. Rest of the part and assembly came off rather easy. It was also rather easy to put the new piece on, except for the damn retaining clip once again causing me a pain in the ass to thread the bolt through to catch on the threads on the brake pedal. Finally caught some threads, and tightened it all up and plugged the electronic connection back on. Took it out on the road, BOOM, Cruise Control engaging immediately when activated!!! Total cost of the replacement part....$18.31 at O'Reily's Auto Part Store around the corner from the house and it took about an hour and a half to take apart and put back together (most of the time wasted on the retaining clip issue). They ordered the replacement part from their warehouse and it was in there store in about 4 hours. I called the Cadillac dealership near me to get a "quote" for CC not working, they said they would have to see it in the shop, but in general the cost is usually around $450-500! What a joke, thanks again sir for the very helpful video, much appreciate!!!

[@OmarsGarage]

emmitti glad the video helped. It’s something that’s annoying when it happens and once you see how somewhat simple the fix is, it’s a relief. Please subscribe for other fixes or updates. Thanks!

[@johanguenther4355]

Thank you sir you save me a lot of headache and money 23 bucks and 5 minutes later my cruise control works again thank you very much thanks a lot for the video

[@OmarsGarage]

That’s what it’s all about 👍

[@ricardodelaguila3587]

Thanks man. I just did mine and it works like a charm again. Paid $17 for the part at O'Reillys, 15 minute job, and great tutorial video. Can't beat that. Thanks once again for your help.

[@americanpupusa1873]

Ricardo Del Aguila awesome. Glad it helped. Don’t forget to like and subscribe. 👍

[@OmarsGarage]

Awesome. Glad it helped.

[@MichaelBrown-yc4cr]

Current price at O'Rileys is $70 - 7/7/2023 Standard PART# SLS568

[@cucote76]

Just wanted to say thanks for the video. I purchased my 2010 Escalade in 2015 and the cruise control never worked. I never looked into fixing it until now that I will be driving to Denver in the near future. The dealer here in Orange County wanted like $200+ just to diagnose it. I called 2 Pep Boys and got estimates for $175 and $155 so I went with the $155. Seems a very easy fix but I like to leave the work to the exerts. My cruise control works now. Thanks again!!!

[@OmarsGarage]

Thanks for taking the time to leave a comment. Always good to hear when these videos help someone 👍

[@jjohnsTX]

Thank you Omar. Bought the part and it fixed the cruise control issue. This combined with another fix for my bad ground causing "Service Stabilitrak" have saved me hundreds of dollars at repair shop this month alone.

[@OmarsGarage]

Great to hear. Did you get the solution for the bad ground from one of my other videos?

[@jjohnsTX]

Not from your channel, but from the KZbin community that makes fixing anything possible. Thanks again for your channel and information.

[@levicallis459]

What ground wire issue was bad ? I have the same issue

[@thetube4p]

Just picked up an 07 Escalade ESV. It has issues with cruise control, rear tailgate switch and leaking at the oil cooler block-off. You've covered everything I need to fix! BIG thanks!

[@OmarsGarage]

That’s awesome. It’s like you have a brand new truck now for less than $50. I have videos on replacing the air compressor and wheel hubs also which if you have a higher mileage suv, you may need to replace eventually. Thanks for the feedback!

[@sosamusic86]

Thanks bro🤙🏽 Order the part on rock auto parts for $8 and followed your lead. Cruise control working now. Thanks again for taking the time to make this video.

[@OmarsGarage]

Glad I could help 👍

[@jayz6436]

F.y.i on the Escalade the brake switch also disengages your torque converter everytime you push your brakes. So if your brake switch is bad. You could be burning up your transmission as well. It's like pulling up to a stop light in a manual transmission and not pushing the clutch in ! I just got done paying 3k for a used transmission in my Escalade because of a bad brake switch.

[@OmarsGarage]

Jay Z thanks for the tip. Crazy that a $10 part can cause so much damage.

[@petershipka3556]

Thanks Omar. I've followed you for several issues and again you pulled through! Thank you so much! You're the best!

[@OmarsGarage]

Thanks for taking the time to leave a comment 👍 Glad I could be of help.

[@scottmaclean3533]

Love how they cram stuff in! We need tiny child like hands with the strength of Hercules with 3 elbows and 2 wrists all of which are double jointed, and eye balls that come out of your head 14 inches so you can see around corners!

[@OmarsGarage]

Best comment of 2021! Thanks 🙏

[@timbogacki5395]

Thanks for the video! That clip after I got the bolt off had me stumped. Appreciate it!

[@OmarsGarage]

That’s what it’s all about. 👍 Thanks for leaving a comment.

[@perfectchaos_official]

Thanks man. Ordered my part of amazon and it worked. I now have cruise control back in my 2011 escalade esv. Getting the clip off was a pain

[@OmarsGarage]

bwc238 awesome 👏. Crazy how a $10 part is all it takes to fix it. Wish all car issues were like that.

[@AliA-mz5oe]

hey fellas can you guys give me the link to it on amazon i dont want to order the wrong part , thanks😁

[@OmarsGarage]

It’s in the description but here’s the link ACDelco D1539J GM Original Equipment Brake Light Switch www.amazon.com/dp/B001KSGJKQ/ref=cm_sw_r_cp_api_i_dHEtDb4HRH9GZ

[@MrPacfan13]

Thanks for the video! Did this today in my 08 and it worked perfectly! 🙌🏾

[@OmarsGarage]

That’s great. Thanks for leaving a comment. Sorry I made you sit through the super loud music 🤣 My editing skills are a lot better now. 👍

[@alexralston22]

Omar, does this video apply to a 2015 Escalade? (Newish body style) thanks in advance. God bless!

[@collinking1438]

Yes bro, finally something on this topic. Hopefully this will fix my issue with my 07 escalade

[@OmarsGarage]

Let me know how it works out for you.

[@ghulamalijafferi5754]

Thanks for this awesome video, getting the clip off of as a pain so all you need is a screwdriver and a push, didn’t want force something off and land up with a broken part , but seeing you do it piece of cake

[@OmarsGarage]

Ghulam Ali Jafferi it’s an fairly easy and cheap fix but getting to the part and releasing that clip is the only tough part. Glad I could help.

[@robertprotz]

Thank you! Works like a charm

[@OmarsGarage]

Glad I could be of help 👍

[@aprilwanlass3850]

Could this also be an issue if my brake laughs are not turning off when I turn off the lights and switch off the ignition? I think that's what has been running down my battery. I had the battery and alternator checked and both are fine

[@OmarsGarage]

For the amount of money it cost and little time to replace, I would replace it just to rule that out. I believe it’s around $15. Use the link in the description to buy from Amazon. It’s the one I used.

[@jbanderson7899]

BIG THANKS!!! I have a question. My passenger seat will recline but not return forward. Any suggestions?

[@OmarsGarage]

Sounds like one of the servo motors have gone bad. They are located on the bottom of the seat. Either they have gone bad or a cable has been frayed. Could also be a bad switch. I had to troubleshoot something similar on my dads M3 kzbin.info/www/bejne/an_QpIyegdCbobs

[@fatboimal]

Bro u probably saved me a few hunnit at the lac dealership I’d be wrong if I jus watched Nd didn’t thank you so thank you man frfr

[@OmarsGarage]

Thanks for letting me know. Makes it much more worth while when I know my videos have actually helped someone and that's the point 👍

[@fatboimal]

Omar's Garage the light use to come on but not anymore and idk where the fuse is I’ve looked in the manual and couldn’t find it

[@kenboggs1772]

Had same issue replaced switch cruise works fine

[@OmarsGarage]

Great to hear it helped you out.

[@nicolearsement2511]

This fixed my cruise control issue and was super easy to change! I have a 2010 Chevy Silverado and the indicator is telling me to "Service Brakes Soon", however both front and rear brake pads were replaced recently. My mechanic shop is also puzzled. Any suggestions?

[@OmarsGarage]

Have they reset the indicator light? If they have and it’s still coming back then you may have a bad brake wear sensor. The brake wear sensors are cheap enough to replace. Also make sure connector pins on the harness are not bent. Sometimes people will connect the sensor and not notice that the connector pins are bent.

[@nicolearsement2511]

@@OmarsGarage 😊 thanks we will give it a try.

[@OmarsGarage]

Check out this video as it could be related if it’s not the sensors kzbin.info/www/bejne/gJjJoHqpbayIf5Y

[@johnmichael9354]

Does it matter if you have adjustable pedals or not?

[@OmarsGarage]

Mine were adjustable. I don’t think it should matter.

[@johnmichael9354]

Went to autozone and ordered one for my Escalade and they asked me if it does have adjustable pedals or not

[@benbarrier5387]

Thank you!! This video saved me a lot of time & money. Thanks!

[@OmarsGarage]

Ben Barrier glad I could help 😃

[@shawnlshs]

Thanks man. This fixed everything.

[@OmarsGarage]

That’s what it’s all about 👍

[@larryaltman1872]

Thanks for the help!

[@OmarsGarage]

Hope it solved your issue 👍

[@monetsengnalivong6471]

Ty so much helped me gonna get my part tommrw

[@OmarsGarage]

Let us know how it goes 👍

[@isaacneece2287]

Other most common issue with abs/stabilitrak is wheel speed sensors.

[@OmarsGarage]

Thanks for sharing.

[@jeremyschwandner7163]

I sure hope this works on my 08 escalade esv same problem light comes on steering wheel but not on the dash

[@OmarsGarage]

The part is so cheap that it’s worth the try.

[@jeremyschwandner7163]

@@OmarsGarage yeah definitely!I'm gonna get the part on Monday hope it works 🤞

[@jeremyschwandner7163]

@@OmarsGarage jus wanna thank you again Omar got the new one in an it works now! Saved me money Man ,awesome 🙌

[@ricklopes5055]

Was you light on the wheel on or off? I have no light on...and nothing on dash either

[@OmarsGarage]

It’s been a long time but I think neither came on.

[@besteleben7671]

I have a 06 STS 4.6, my cruise control works fine but the green light on the instrument cluster does not come on, can it be the brake lamp switch ?

[@OmarsGarage]

It’s cheap enough and easy enough to swap it out and at least you can tule that out.

[@gdub14]

Can you recalibrate an existing brake sensor position switch or can this only be done once on a new switch?

[@OmarsGarage]

Never heard of being able to recalibrate. Seems like it’s a very common issue though. I never had any issues again after replacing the switch.

[@gdub14]

@@OmarsGarage well I know the switch isn't totally broken because I can get the cruise control to work if I pull up on the brake with my foot. I swear it doesn't move, or maybe a tiny bit, but it fixes it. So was hoping to recalibrate the zero position on it.

[@mikeyoung8098]

That fixed my cruise control. Thanks!

[@OmarsGarage]

Mike Young awesome! It fixed mine and hasn’t failed again as of today.

[@112785jam]

Thank you sir, great video 👍

[@jonathanp863]

What else does the brake lamp switch does ?

[@OmarsGarage]

The brake light switch serves two major functions. First, it turns on the brake lights when a driver presses the brake pedal. Second, it sends the signal to the vehicle computer that brakes are applied. This can be used for push to start etc. In order to start some cars you have to depress the brake pedal before turning the key. This switch is what tell the computer that you have applied the brakes. When you use cruise control the computer disengages the cruise control when you press the brake, so if it’s faulty the computer does not allow for the use of cruise control.

[@jonathanp863]

Omar's Garage will I have a small short video on my car on my channel if u can please check out tell if it’s the brake switch

[@mrdeanv4414]

That was Great.... Thanks Omar!

[@OmarsGarage]

MR DEAN V hope it helped solve your issue. Please like and subscribe. Thanks.

[@BringBackMasculinity1987]

Bro, My 13 Yukon Denali L/R brake lights stay stuck on even with the truck engine off, but top brake light is workin fine and so is my Cruise control. I Appreciate any advice??

[@OmarsGarage]

Try unplugging the brake switch by brake pedal as shown in this video and see if they shut off, if they do, it's the switch if they're still on, you may have a short somewhere.

[@BringBackMasculinity1987]

@@OmarsGarage Definitely gonna try that this weekend 👌 appreciate the tip man!

[@OmarsGarage]

DatDominicanBul 215 buena suerte hermano. Stay safe.

[@BringBackMasculinity1987]

@@OmarsGarage Gracia bro! I pulled the switch out just like you said, lights stood on. SMH! You were right, I gotta a short, local tech tells me its comin from the BCM.😵😵

[@mattesco7402]

So even if brake lights work fine it still could be this part?

[@OmarsGarage]

My lights worked fine, it was just the cruise control that didn’t work. This part can also affect your brake lights function though.

[@mattesco7402]

Sweet just replaced it and good to go now. Thanks...

[@OmarsGarage]

One of my very early videos and I apologize for the terrible sound…I swear I’ve gotten better 😂 The important thing is it still continues to help many folks out.

[@OmarsGarage]

This was when I was first figuring out the editing years ago. Sorry about the loud music lol. Just happy it can resolve a lot of folks cruise control issue.

[@rensobrea1717]

Thanks bro for you help

[@JusCJ91]

Thanks man

[@keithg3401]

Thanks for the video. I have a 2013 ext, all the issues that everyone else has, no cruise control, traction control light, brake light, and I have an extra brake switch from my 07 esv. I went to change it on the 13 and there is no switch. Went back to the 07 and saw it, but it's not there on 13 and the lights on dash just came on yesterday. The cruise control has been out for at least a couple of months and my brake lights are working. Any idea on what to check? Thanks!

[@OmarsGarage]

Sounds like a brake controller switch. If it’s not in that position as a 2008 , it may be in another place.

[@pillwill9537]

Yes sirrrrrrrrrrrrrr!!!! you the man cuz hope this is my solution.

[@OmarsGarage]

It’s a bit of a pain to get to, but it’s literally one bolt and a connector. Pretty easy to swap out. Let me know how it goes.

[@TheNorcoGuy85]

06 srx, brake switch code triggering my stability system alert and service breaks alert to come on, swapped and still wont clear. Ideas?

[@OmarsGarage]

TheNorcoGuy85 have you checked the brake fluid level? Sometimes if it’s low it will trigger those lights. If it’s not that you may have a bad ground. Sometimes they ground cables will develop rust and will need to be cleaned. On te Escalade there is on on or near the firewall on the drivers side.

[@RockysCustomTelephone]

This DID NOTfix my problem What else can I do

[@SIQUEIROS413]

Great video thanks

[@traewilson5560]

Bro I need help my 2007 escalade rear taillights park lamp aren’t working the Brake lights work so do turn signals and hazards just the park lens not working

[@OmarsGarage]

You mean the rear lights aren’t on when the car is just idling? If that’s the case it sounds like it’s just a relay in your fuse box.

[@Paperless_One]

Great video. Thank you. Please reconsider the background music. I found it annoying and irrelevant. Thank again for your time and effort.

[@OmarsGarage]

Paperless One I agree about the music. This was two years ago when I was still learning how to edit. Most of my newest videos don’t even have music other than the intro or outro. Thanks for the feedback.

[@fatboimal]

Now if possible my heated startling wheel doesn’t work for my 08 Escalade if u can help me with that I’d be foreva grateful frfr

[@OmarsGarage]

Have you checked the fuse for the heated steering wheel? Does the light come on when you hit the button?

[@fatboimal]

Omar's Garage the light used to come on it use to warm up but not anymore Nd idk where the fuse is

[@OmarsGarage]

Joey Snacks I never had that issue but I found this online. ”There are "2" fuses one is Fuse "48" located in the under hood Fuse Box one is "Inline 7.5 amp Fuse" located in the PINK wire at the Steering Column Harness” here's a video where I check a fuse for a different issue. Cigarette lighter repair Escalade Yukon Tahoe Suburban Silverado Denali kzbin.info/www/bejne/Y6asnXaAn9iFq5Y

[@fatboimal]

Omar's Garage thnks a lot bro

[@RWCLOCO]

I’m gonna try that my light in the steering wheel lights up but the cruise control won’t work

[@OmarsGarage]

RWCLOCO That’s what was happening to me...the steering wheel light would turn on when I clicked the button, but the green icon on the instrument cluster never came on when I got to speed and tried to engage the cruise control.

[@ericsager6632]

how bout 2000 tahoe ?

[@lfree3961]

Great video put please don't play me music..

[@OmarsGarage]

Lol…sorry you had to sit through that but the info is good at least. This was one of my very early videos like 4 years ago when I first started. My newer videos productions value has greatly improved. Appreciate tye feedback though 👍

[@maxcruz5549]

No me funciono no prendio 🙁

[@OmarsGarage]

Revisa los fusibles…o pueda ser que necesitas otro switch

[@mikeyellen362]

Fucking headphone user warning 0:01

[@OmarsGarage]

Spoiler alert.

[@billypate2479]

Music is annoying!

[@OmarsGarage]

Billy Pate I agree. Unfortunately it was made when I first started on KZbin and my editing skills sucked. Hopefully it can help even with the volume turned down.

[@IlovetheUSAforever]

Hello. please tell me where to look for svith? location?

[@OmarsGarage]

It’s attached to the brake pedal as shown in the video.

[@billygates7003]

Music annoying

[@OmarsGarage]

I completely agree….my video editing skills have hopefully gotten a lot better over the last three years. 😂

[@karenvanderwall9991]

Music is annoying

[@OmarsGarage]

Yes I agree. It was one of my early videos when I was still learning how to edit. Check out some of my newer videos.