Whirlpool Oven Repair - How to replace the Inner Door Glass

[@Jeff_n_Texas]

Just what I needed. Thank you sir.

[@virginiabroady5528]

Thank you for posting this. Detailed instructions wonderful and especially needed to get door back ON oven. Thank you again.

[@BRENY1970r]

I’m so thankful you don’t even know how helpful this was for me! So grateful! ✅💟

[@merlineblack2336]

Thank you for making this how to video!

[@richrowe4589]

Great video to follow really helped. This video showed an oven with 2 glass panels. My oven has 3. After disasembling, I deeped cleaned all parts. After putting it back together I, I found 3 left over screws. Hmm. Seems okay and I don;t want to take it back apart. Hope it's okay. Time will tell

[@thespis99]

Thanks so very much, was a great thing to accomplish during Covid LOCKDOWN .... with your Socially Distanced help.

[@waynepelouch1325]

I found that during the assembly steps that leaving the glass window underneath and hinges on made it very difficult as they are no longer attached once you remove the screws. Take the front window off and just put the two metal pieced together first (and put the two side screws). Turn upside down and add the hinges, then the window. WAY easier!

[@kerridoyle9241]

I need to know what kind of adhesive to use on the fiber glass insulation in my oven door

[@sandyrose-felix8579]

Hi Steve, are you able to help us out on a problem with our stove?

[@waynedingess9727]

Do you have a video where you disassemble the entire door I've got this rope that fell out and need to see where it goes

[@lesliecooper5398]

My 2000 model is almost identical to this one. Mine has 2 panes (had) 2 panes of glass inside and one broke. I was able to put back together but can I use the oven with 3 panes? I need some sort of diagram to find out how to put a new one in, failed to take pictures as I was disassembling it.

[@cindycurran2053]

I could not get the metal panel attached when putting the door back together. I had to hire it done. Wish it was as easy as yours. I worked several hours on it and couldn't get it back together.

[@chuckgrumble5440]

mine is the same looking model but has no tabs to lift up... I am trying to figure this out.

[@patricianorvell4573]

Hi. Is the glass suppose to be airtight against the frame? When I was cleaning the glass I noticed a little liquid seeped through between glass and frame. Is this ok?

[@tammyclark6308]

How do u clean the inside of the oven door?

[@maryp5924]

I cannot seem to get the cover back on. When I forced it, none of the holes line up. Is there a trick to this? It looked so easy on the video

[@nancywalsh1652]

I also need help at the top part

[@circalibrary5126]

While tightening the door handle, I had only opened from the front thus, there’s is a curved steel pressed metal piece that slid down to the bottom of the door. I am unable to se how this piece was fitted inside the door ?

[@kengrenier1876]

If this five thumb DIY'r can do it, anyone can. The hardest part was getting myself to do it.

[@lindagrant4565]

I don’t have those clips on my oven door . I haven’t figured out how to get door off . My model number

[@seanrose1252]

FRONT GLASS WILL BREAK if you tighten the screws too much. $230 mistake.

[@dingfeldersmurfalot4560]

Wow $230 for a little piece of glass. 😒