Apple Watch Series SE Glass Replacement Guide: Restore Your Screen Like New!

[@kemalpasa1743]

is the watch still water proof?

[@acegamer4060]

Thank you so much for doing these videos, it got me to fix my Apple Watch

[@LadyHella95]

Dude i work in repair and i just keep looking at your great tweezers witch ones do you use

[@stephenrichardson508]

Can I assume that the series 5 and SE are the same LCD screens from the internal view of this watch? From the untrained eye they look identical?

[@Blackshoot1able]

Thanks for the great video. I have one question which glue are used for the watches. Thank you for a answer. 👏🏼

[@FIXDPHONES]

If you are referring to the adhesive on the boarder then cold press adhesive is great. For the glass to display both LOCA and OCA work.

[@rayaw535]

Thanks for the video, if I may ask what adhesive did you use to stick the screen to the front glass?

[@Jhst2101]

Nice, been waiting for this video! Thanks guys!

[@FIXDPHONES]

Appreciate your patience

[@CompuKonstantin]

The hardest Apple Watch repair I‘ve done so far was an S0 display flex replacement. But those only glass replacements really are on another level.

[@Shortstories-v6e]

Q9wy woeye

[@Shortstories-v6e]

Wo2 yowhe

[@praveenchauhan7659]

Hello Bhaiya mere watch ki display Tut Gayi hai ap think kar doge please 🥺🥺

[@chalswind7563]

I took it apart to replace the Apple Watch Se LCD. There is no problem with the three cables, but the thin cables on the left and right sides of the cables were cut. I connected the screen but it doesn't touch. Should the cable be replaced?

[@SamSkorokhodov]

Do you take mail in watches to fix? My wife cracked her Iwatch series 4

[@TechTee504]

The Qian li 3d pry tool has become the best method to remove the screen for me. Use the little offset edge with a bit of Alcohol and it comes right off. Also why don't you remove the battery before removing the screen? Have you never shorted out a screen while doing the repair? One more ting lol are you gonna do the OCA method in the future? I've gotten a lot of loca spilled everywhere and it's really messy. I started doing the OCA method recently.

[@FIXDPHONES]

OCA works well and is not messy. The issue is you get one shot at alignment and it’s tricky to get it perfect every time. With enough practice with LOCA you will learn the minimum amount needed to have no mess and it gives you the flexibility to cure it in the perfect position. To avoid shorts it comes down to practice. I’d recommend removing the battery, but after 3000+ watch repairs it’s not an issue anymore. Also fixing a “short” isn’t difficult anymore. I wish you luck in all future repairs and hopefully my videos help!

[@TechTee504]

@@FIXDPHONES isn't that what the alignment mold is for using the OCA? It guarantees you get it right the first time. I've seen a few sites have it for sale. I just went ahead and got one. Waiting for it now. Also have you ever gotten that loca inside the connectors? Isn't it game over if that happens?

[@oDJJPLo]

This tool is everything! So glad I bought it. How are you getting on with the apple watch repairs?

[@TechTee504]

@@oDJJPLo I just did my first series 6 about two weeks ago. The s4 and newer are pretty much easy as hell just doing the glass. I know some people who don't even clip the edge of the glass and can peel it right off.

[@oDJJPLo]

@@TechTee504 nice. Yeah I find them simple enough to do I've just recently run into issues which weren't happening before which are becoming frustrating as hell because I can't figure out why it's happening. For example when I'm removing the glue sometimes I can see small patches as if I've peeled a layer off. Any idea why?

[@aldopecora2033]

RIP my Watch following this “tutorial”. DAMN

[@ninjasploit]

Hey! How come some of the new front glass already has cables attached to them, what is this? And do you need glass with digitizer film attached or does the original digitizer stay on the watches?

[@berenoelia6663]

The one with the cable has a new touch. If you don't get to save the original touch you can put a glass with a new one

[@ninjasploit]

@@berenoelia6663 Ah okay good to know, wanting to start doing some repairs myself so trying to get a better understanding! Would this trip any "serialization" issues, like full display replacement sometimes makes the NFC chip stop working etc.

[@FIXDPHONES]

Whenever you see glass with a flex that means that it’s a combo between the glass and digitizer (touch screen) this is only needed if the touch was bad. The series 2 and 3 will always need a new digitizer where all other models can have the glass only replaced if the rest is still good.

[@FIXDPHONES]

The NFC can be transferred from one display to another to avoid issues that arise with a whole display replacement.

[@ninjasploit]

@@FIXDPHONES ah right, that makes a lot of sense! Also good to know that I should make sure to get digitizers for series 3 glass repairs, thanks!

[@okavuomena392]

Thanks for sharing 👍👍

[@FIXDPHONES]

No problem 👍

[@sudharmanarankotuwa512]

Thank you very much,what a great job?

[@FIXDPHONES]

Glad you liked it!

[@Allioui]

Love this video!

[@eng-tech923]

Thanksssssss for sharing! Awesome 👏

[@dreamer1787]

Hi I need to repair my se how much do u charge?

[@Greatful0374]

I removed my cracked glass screen from SE 44mm… now I see a silver aluminum looking back, what should I do next? My kit contains tools and a clear screen not the black tint screen???? 😮

[@jakobkirz7329]

Is the watch water resistant still after this repair, if so what adhesive did you use?

[@enriqadris3411]

It’s not

[@electronicwhizz5748]

Great video! How long do you keep the watch clamped for?

[@FIXDPHONES]

at least 24hours

[@oDJJPLo]

@FIXD Phone Repair Great work! I've watched all of your videos when learning to replace the glass and have been fairly successful but recently I've been shorting the watches, the screen is blank although it still vibrates etc please advise me how to repair. I couldn't figure out how I'm shorting the watches but I came to the conclusion that I must be powering on the watch when cleaning the glass from the frame. I figure draining the battery should solve that, but how do I repair it the shorting issue? Please help. Thank you

[@impostergirl3893]

I’m getting series SE for $100 (that’s quite a fair price i guess) but the screen is cracked. So should i buy it and get the screen repaired? Someone pls help. Does the change screen affect its function?

[@FIXDPHONES]

Any damage will affect its resistance to liquid. Replacing the glass will definitely make it look new again. Fixdirepair.com submit a repair request if you do end up getting it.

[@slive888]

Thx

[@FIXDPHONES]

No problem

[@bvt_roze1974]

INCREIBLE FELICITACIONES

[@iphonecell2924]

hello i changed touchscreen of apple watch 3 gps but after i have apple logo and it does not turn on what can it be thank you very much

[@fernandoriosvasquez]

does it still being water resistant?

[@khatedinglasant3728]

Can I ask how much the price replace the screen coz it fall and broke thnks

[@chillrelax6915]

What size filament are you using to separate them?

[@sg8955]

hello please say NFC module if you do not know from the old screen and do not put on a new one when flashing knocks out an error! how to reflash apple watch 4/44 with a non-native NFC module thanks

[@sergiopg3625]

After changing the screen the NFC has stopped working. Do you have a solution for this?

[@poden3863]

What tape is in use for the separator . ? Will it melt at 80 oC ? Or did you preheat and turn heat off when tape applied?

[@praveenchauhan7659]

Hi watch ultra Pro price kya hai😢😢😢😢😢 apke suscribe rhu Bhai 😊😊

[@duanemassey4560]

What are the tweezers & pick you're using? Look pretty decent.

[@MakingMadeSimple]

If you do this repair, does the watch's software still work? I was told it wouldn't.

[@FIXDPHONES]

Glass has no other function than to look good and protect the internals. like any watch replacing a broken glass doesn't affect the rest of the watch.

[@MakingMadeSimple]

@@FIXDPHONES Oh, I see. I was told that there was a software lock on Apple's behalf.

[@Dreyzie]

The soundtrack is lit 🔥 what’s the name? Great job 👏

[@FIXDPHONES]

From KZbins Audio Library Arms Dealer- Anno Domini Beats Dark Tranquility- Anno Domini Beats

[@Shortstories-v6e]

bro from series 4 to series se and 6 glass are in same size my point is that if i dont get apple watch se or 6 glass can i use series 5 glass or no

[@FIXDPHONES]

Same glass for the 4,5,SE, and 6 but different Digitizers if needed during the repair.

[@Shortstories-v6e]

@@FIXDPHONES thank you so much

[@denekobrown5201]

I have question wat kinda wire is that which u use to cut the outer lay of the screen

[@-ndr-cci4328]

I’m really impressed, great job man!💪🏼 I’m also trying to repair an Apple Watch S3 42mm, I would ask you how to choose the best components for the restoration, and if the force touch (if I’m not wrong, the sort of adesive on the boundary??) usually have to be replaced in case of cracked glass. Thank you, sorry if I have made some errors, I’m Italian😄

[@jasonmaes8831]

hello i have a connector lcd broken what solution ?

[@antoniosilvestro8721]

does not have the flat 3d touch?

[@xFixRepairsUK]

Great video 👍👍

[@wahyuaris5483]

do you sell iwatch SE 40mm lcd?

[@yousri131]

Thanks for uploading the video, good work I have Apple SE 44 mm Watch the glass was broken , tried to do as you but the digitizer was broken. I bought a Apple watch 5 44mm was IC Locked, I used the screen to replace in the SE, and if did not work i will put it back to the 5. Now the screen does not work on neither one!! a BLACK Screen only one time on the 5 apple log show up blink never happen again. As expert do you know what i did wrong? Thanks in advance.

[@richardvarga7681]

Hi, did you manage to make the screen work again? I got the same issue with my SE and its screen. Thanks.

[@yousri131]

@@richardvarga7681 No i could not

[@MrOliatko]

You damaged something on working screen when swaping

[@현규장-m7b]

oca 접착제거하고 uv경화제 사용해야하나요?

[@Sreelal_Thamarakulam]

Rate?

[@hafizhasham5095]

X3 watch lcd

[@Ayaan920]

I buy watch t55 touch glass

[@Talmiior]

stupid flashes are just annoying and subtract from the value of the video

[@SkAbid-di4vv]

watch series 9 desply new darkar hai bhai number do plz

[@plzdonhack]

Hey there, I’m looking to replace the glass only on my Apple Watch SE. May I ask a few questions? I would like to know how could I differentiate the glass layer and digitizer layer when separating the screen? Thanks!

[@jk5kwastaken]

Did you ever get an answer?