Fixing a Crashed DJI Mini 2: Gimbal Repair Guide

How to Replace dji mini 2 gimbal and testing gimbal cable if it working. After Replace the Gimbal the camera is not point straight so we have to calibrate the gimbal with calibration Firmware.
Feel Free to Contact Us for more Information about Remotely Fix 40011 and 40021
Telegram : t.me/djisolutions
Whatsapp : [phone]

[@GoingSomewhereTogether]

What glue did you use to secure the cable to the mother board? Thanks!

[@RonInbar]

You forgot to reconnect the small ribbon that you disconnected at 2:15.

[@djiSolutions]

FBI here 😁

[@albertomg831]

Hello, i broke the yaw cover of my dji mini 2 gimbal. Would you recommend changing the full gimbal or is not too complicated to change just the yaw? Thanks for your time.

[@djiSolutions]

Mini 2 better change whole gimbal that will make your life easier 😂

[@albertomg831]

Thank you for your answer! Im going to try to find the way to remové the yaw cover, otherwise ill change the whole gimbal😅.

[@Coppersulfate9009]

hey do yo have a tutorial for replacing the stablizer arms? the 4 arms with the rubber part

[@mauriciovidalr]

Fue una buena experiencia muy confiable al 100%

[@Candles666]

The problem im having is finding the right size screwdriver, what is the one you are using please?

[@BazejTruszkowski-sw9dy]

@djiSolutions does it work for DJI mini 2 se ?

[@joseantonio-tf1yj]

Muchas gracias.... me ayuda mucho y la reparación....menos costosa!!!.. Aquí José,desde Bogotá.

[@djiSolutions]

Good to hear that 😁

[@RonInbar]

I can't seem to pry the top cover open. I removed all four screws and managed to pry it open a bit on both ends but there seems to be something near the middle of the drone that fastens the cover to the body of the drone. I'm afraid if I use any more force I will break it.

[@RonInbar]

Eventually I managed to do it using a large screwdriver to loosen the plastic clips from the inside.

[@illmavic247]

Thank for your help,great video and detailed.curious,what's that black paste you are using to hold the cable firmly?

[@driftbike7946]

did you just super glue the broken arm? i have exact problem...

[@djiSolutions]

Don't use super glue, it not last long, replace it

[@michelaraujo8307]

Your videos are amazing, thank you very much for your help.

[@xXDannySilvaXx]

so the camer itself and the cable for the camera, if you change those 2 onto the next housing, you dont need to recalibrate?

[@djiSolutions]

Change cable not problem, change gimbal will have error 40011, change camera will have 40021.

[@JonnyWaldes]

will this result in gimbal calibration problems? or does using same camera / cable avoid that?

[@djiSolutions]

Use it's camera, just change the gimbal. If you change the camera you will have error 40021 but that error also can be removed.

[@JonnyWaldes]

@@djiSolutions when I tried the "calibration firmware" it just stops and doesn't advance after a few percent :( doesn't get near to end where I need to turn drone up

[@ПоНаПриНаехал]

How much usually cost to change gimbal?... dron flight well and camera movies in any direction... i have problem with quality of video... time to time its shoots well but time to time just picture folling to parts( lkke radio waves, if i can say it) i bring it to local service center, they took it for one week and after diagnostic (50 euro) they told that need to change gimble.... might it be connected with gimble ???

[@ПоНаПриНаехал]

And in the app I can't see any errors...

[@bluecavemen]

Where does he buy the parts from?

[@horlihorl]

Darf ich fragen welchen Kleber du verwendest ?

[@Matanumi]

Oh wow that's nuts you actually fixed it... No error code issues because ultimately it was the same camera wasn't it? You just changed the frame and gimbal arm of it?

[@djiSolutions]

Yes, if you change camera, you will get error 40021.

[@angelmanuelcamacho8690]

But I see 40011 on the remote 😕

[@briangaubatz6503]

Thanks for the tutorial. What parts do I need to order for the camera to do this repair? I have exact same damage.

[@djiSolutions]

You just buy only the gimbal but not camera

[@travishodge9013]

@djisolutions does it work for the DJI mini se 1 ?

[@djiSolutions]

Yes sure

[@travishodge9013]

@@djiSolutions do I need to purchase a particular camera so I don’t get any calibration issues ? Thank you again !!

[@ymsprodigital]

I just ordered the gimbal to replace. Do I need a software to calibrate I see that you didn’t use any software. I will be keeping same camera only the housing broke. I would appreciate any tips. I have a MacBook so not sure how to get any software if needed. Thank

[@djiSolutions]

Wait until you have the error or sometime it doesn't have error but camera not point straight. Telegram or Whatsapp us

[@francogasque]

Muchas gracias ! Me ayudo un monton.

[@sukhmanchahal1001]

Hi, my dji mini 2 was also broken from the same place. I ordered the parts and installed them completely fine. The drone is flying good now but there’s a error that says gimbal stuck and the gimbal doesn’t move. Can you please help me with that. Thank you

[@rihardsbimanis8390]

change the 3 in 1 cable also called IMU flex cable

[@angelmanuelcamacho8690]

I got the same problem and i saw in videos that i had to download python then other BS to calibrate the mini 2 gimbal and they did the same thing you did so i didn't fix my drone but i see your video i can do what you did but when it comes with computers no way i get lost.

[@djiSolutions]

Never and ever using Python code please. It not good software. Telegram me for more information

[@LadyLinaful]

What‘s the exact name of the broken part and where can I get it?

[@djiSolutions]

Check the link in the description

[@Coppersulfate9009]

there is no link@@djiSolutions

[@mgmaier75]

Great Video!!

[@djiSolutions]

Glad you enjoyed it

[@leidanrabanal3452]

Thanks Dude!

[@djiSolutions]

Happy to help

[@gavinrichardson3918]

Thankyou Where can i get the replacement gimbal?

[@djiSolutions]

It depends on where you live. Or check out AliExpress in the description

[@tsky86]

@@djiSolutionsthanks for sharing this. The description doesn’t have the link to where to get the replacement parts. Thank you

[@KilahertzOfficial]

Between 3:30-3:45 how was the arm fixed?

[@djiSolutions]

It very easy to fix. Just buy the new gimbal and replace it 😂

[@KilahertzOfficial]

@@djiSolutions why not show it then 🤣🤣

[@izman4489]

@djiSolutions u suck

[@coleoneil3168]

how do you get the arm off? I unscrewed it form behind the camera and it does not seem to want to budge@@djiSolutions

[@Shiva-zm4hz]

How can i order the parts??

[@djiSolutions]

Check in description or AliExpress

[@adriandelarivagomez5594]

Donde puedo comprar el candal y la camara?