Fixing door lock switch on Lincoln Navigator...and other vehicles

[@waco254texas2]

Thanks for this video bro waco tx

[@mtbodine64]

by chance did this fix the exterior lights like the seering wheel and console lights not working??? If not how do do that and auto lamp not working....just bought this as I can fix im sure. Just need some direction. Thanks

[@bryan2garcia]

You had to disassemble the door panel to swap out the switch right?

[@HexNottingham]

What was your technique on popping it out with a knife? I just tried on mine and don't want to scar it up.

[@nsdelgado3d64]

I’m going to attempt to do this tomorrow. I was worried about removing the door panel and not being able to put it back the same way. But I just saw your video and it looks like you didn’t have to remove the door panel.? Is that correct? You didn’t remove the door panel you just pop the lock off pushed in each side of the Black part of the switch? and it came straight up? Pull the wire through connect the new one and put it back in the hole?...

[@alexhooge8477]

Did you do it? I'm attempting it tomorrow any advice?

[@natashadelgado-solisdeovan202]

Alex Hooge kzbin.info/door/wOa5jkkurvI4z-IQMUd_Jg

[@natashadelgado-solisdeovan202]

kzbin.info/www/bejne/mX3ImZ96rauZm7M

[@jared7360]

@@alexhooge8477 did you do it? I’m attempting tomorrow. Any advice?

[@richkingman]

Do you have to take the door panel off, or does the gray plastic piece pry off the arm rest?

[@MLProductions.1]

Probably too late but the door panels are very easy to remove. Like 2mins. IDK about the lock siwtcu but the power mirror siwtch you can pop out without removing the panel

[@johnwalsh6419]

Thank you the last time I changed the power door lock switch I removed the door trim panel. Can the power mirror switch be popped out also ?

[@bleedingeyeball27]

I would think you can by looking at the switch...but there is a chance you might break the tabs...if you did, probably could epoxy or glue it in. but proceed at your own risk

[@bleedingeyeball27]

I would think you can by looking at the switch...but there is a chance you might break the tabs...if you did, probably could epoxy or glue it in. but proceed at your own risk

[@cristalurena9713]

Where. Can I find the door fuce?

[@jaydunit8857]

My power locks aren't working, driver window doesn't work, power lift gate isn't working, power 3rd row doesn't work, all of my fuses are good, any suggestions on what could be the problem? Any help is appreciated

[@johnnymojica84]

jay dunit did you get it fixed im having same problem

[@letashiastephens8749]

I have the same problem.

[@missourifarmgirl6198]

how would you suggest cleaning those connectors?

[@bleedingeyeball27]

Auto part stores have cans of electronic cleaner...that and a toothbrush

[@crookcounty1978]

all you need is rubbing alchol and a que-tip

[@cristalurena9713]

I have a problem with my Lincoln doors they stop working what it can be ? A fuce?

[@bleedingeyeball27]

Cristal Urena not enough specifics

[@cristalurena9713]

When I push the button for the doors to lock and unlock it does not work. And the alarm for the car does not work either to lock the doors.

[@EduardoGarcia-uq9yb]

Cristal Urena did you ever figure out what was wrong with your truck? my Navigator is doing the same thing.