Fixing Leaking Philips 2200 Series coffee machine

Welcome to our comprehensive tutorial video on fault finding and fixing a leaking Philips E2200 coffee machine. If you're experiencing water leakage from your beloved coffee machine, this step-by-step guide will walk you through the troubleshooting process and provide solutions to restore your machine to its optimal functionality.
By following the steps and tips outlined in this tutorial, you'll be able to identify, fix, and prevent leaking issues in your Philips E2200 coffee machine. Remember to prioritize safety, and consult a professional if needed. Enjoy your delicious, leak-free coffee experience once again!
Don't forget to visit Partshub (www.partshub.co.za/) for any replacement parts you may need for your Philips E2200 coffee machine. They offer a wide range of high-quality components. Additionally, if you're looking for top-notch coffee beans and accessories, check out Clipper (www.clipper.co.za). They have everything you need to enhance your coffee brewing experience.
Like, comment, and subscribe to our channel. Share this video with fellow coffee enthusiasts facing similar issues. Thank you for watching, and happy brewing!
Part Number# 422224777123 Saeco Thermoblock Inlet
Music: Omission - Huma-Huma
#Philips E2200 coffee machine

[@RadnaVerhage]

Wonderful! Your video helped me a lot! I ordered the new part, received it today. I installed it and we can drink a nice cup of coffee again ☕👍

[@benjaminpatrick2943]

I have the exact same problem, but mine is fully leaking. No coffee at all. Just ordered the part. Should be here in 3-5 days. Thanks so much! Very well done!

[@naruvinkeur]

Thanks to you i didn't even have to make a effort to repair it, i could found the leak that wasn't the same but i've had all into i've needed !

[@astrologicgames]

Thank you! Your video helped me to fix mine! In my case was just a loose hose.

[@matthewvogan3789]

I have had this machine for 3 years and this exact problem just happened to me. Thanks for helping me identify the issue!

[@unggrabb]

Excellent, same part broken on my machine too. Bad quality component obviously. New part should arrive in 3-4 days. Testing it was a good way to make sure the ground fault protector worked in the house. Blew straight away when water sorayd over cables 😅

[@sbeexsbeex]

Thank you so much! I changed many o-rings without success till I discovered this! Thank you

[@hagron5702]

Bro, your video convinced me to look inside my Philips 3200 and as it turns out I have the exact same problem. I was able to spot the water gushing out of the same part by removing the back panel. Merci beaucoup =)

[@squangan]

Thank you for taking the time to male this video up as with it I was able to troubleshoot my 3200 model which ended up having the same issue. A parts supplier had the piece shipped out to me the same day.

[@willgrover5270]

Fantastic video. I am having this same problem, and so will looking to solve based on your video!

[@MrTitoPuentes]

Thank you on your video and on letting us know part number. I had same problem on my 3200 series and fixed it without problem.

[@ErikMeijerink]

Thank you so much for this tutorial! I had the exact same issue. Fortunately, my replacement part arrived in a day!

[@DominicsParent]

I just bought a secondhand 3200 and this video pointed me in the right direction. The breakdown was slightly different, but the internals are shockingly similar. Mine is leaking from another junction closer to the face of the device. It appears to be right at the bypass for the hotwater (which dispenses normally, without leakage). Hopefully this part proves to be just as inexpensive and easy to swap.

[@remusb]

Whoa, I can’t believe I found this video just in time. Today I disassembled the back plate and I saw how the water was spraying everywhere but had no idea how that part is called.

[@Gabriel-cv4vp]

Lol our machine started leaking about 9 days ago or a bit more. It's about 2 years old and we use it daily. Cannot wait to open it and see where it's leaking. I wasn't so sure before the video but now if I can see the leakage like you did, I can reorder the piece that's broken for me. Thx for the video

[@MrAlicobra]

Thank you ! i have same problem, i will solve after your advice ! 👏

[@vincentthilly]

You just saved me a good amount of money, thanks!

[@noisednb]

THANK U my Friend! U made my day

[@TheQuickBrownFoxTV]

Thank you! This machine is wonderful, and it seems they all have the same issues. The other one being the milk jug has a grommet revision. I ordered a new jug.

[@MisterCroo]

I had a same issue, just unlucky that water was spraying on power curcuit and did a fuse do drip off. Will order new part :)

[@atmamont]

Thanks, legend. It now feels way easier to do it myself. Under warranty I was sending my machine to Philips and now it was a question of if I should just ditch it. Unfortunately, looking for alternatives gives same vibes - no one manufactures machines that work 10 years straight

[@atmamont]

After successful disassembly I tested it and oh god, this plasticnpart sprinkles water right on the cables that are behind. Some of them are rusty and basically what triggered me to look for info - my circuit breaker was tripping. Thanks again!

[@alxpi927]

Por fin!!! Un gran vídeo!! Llevo buscando la reparación de esta máquina durante mucho tiempo y por fi aquí está!!! Enhorabuena!! Y muchísims gracias!!! 🎉🎉

[@rabatjoietv]

Thanks for this usefull and detailed video :)

[@marcoj831]

well same here ( Netherlands) ... 3 years and love the machine.. but leaking in the back... now I know how to continiue... Already bought a new boilerpin and also a new brewerunit to replace them.. but unfortunate still is leaking in the same spot left rear.. so will use this tutorial video to open the unit in coming days.. and will update my experience later on.. but thank you already !!!...

[@marcoj831]

Well this tutorial is amazing.... this was exactly the problem... first bought the boilepin (17,-) and to be sure an new brewer unit (87,-) ...... but did was not the problem... but keep them anyway installed and keep older as spareparts... So checked again .. found this vid.... opened it as showed .. and bingo... the same..thermoblock inlet connector round 8,- per piece... Thank you for this !!

[@Maxbgrant20]

Hey hey! Where did you buy the piece?

[@marcoj831]

@@Maxbgrant20 looks like reactions are deleted

[@stupidbu]

Thank you!

[@user-iq5xk6ju7y]

Very good lesson, however can you adjust your grinding knob slightly to fine. Because your espresso was a bit watery.❤

[@marcinmarchwinski9263]

Pomocny filmik 👍

[@lucianhtc1x]

Same issue after 3 months of use, luckily I have warranty but until is repaired i think Will Take some time

[@dankowalski2146]

Thank you for helping me identify the possible leaking options. But I highly recommend to contact Philips support and not attempt to fix the problem by yourself, of course if your product is still under the warranty. Otherwise - knock yourself out and follow the instructions on this video

[@Brian-jl7ie]

I sent my machine to Philips support for repair. They sent it back and I had the same problem I had before I sent it to them. Better off doing it yourself. This video saves time and potential money. They are quick to remind you that your warranty is out so will charge you a lot of money for their poor product quality. Great Video!

[@bozojarm3880]

hi, the link which you have in description is not working....can you check it please

[@marijana8811]

Hey, I have the same problem. Was the leaking water warm?

[@jovanpiroman]

I still haven't used the machine i bought it and when i start the machine first it give me brown water, on the second attempt started steaming from the sides and water coming underneath.

[@ptj6412]

i have the same...waiting for the part to arrive...$5 part, but $55 for shipping 😞 what did you do about the coffee grind mess? I took mine apart and there is no coffee mess like yours.

[@firewoodwarrior4396]

Same machine and exactly the same part broke on mine.

[@aligoceriletarih5507]

Hello, thank you for your effort in the video. I have the same machine and it doesn't open at all. I opened it and the capacitors around the yellow transformer were very hot when plugged in. If I change the capacitors where the yellow transformer is located, will the problem be solved? thanks

[@davidlogasi1835]

Hi Ali, Sounds risky.. I don't recommend touching the capacitors if you don't have the correct knowledge to do so. I'm not sure what the issue could be with your machine. Rather, take it to a technician to avoid injury.

[@johnm8695]

Exactly the same problem. I also made a video. There must have been a bad batch of these cheap plastic parts. Thankfully it was only a $10 part.

[@pricajmotomato8463]

Hi. the device leaked. we have opened. Heater connection broke. we replaced it and put everything back together. everything was working fine. today the device leaked again. took it apart again. one transparent tube separated. which brings water to the latte go. and when we put it together everything seems normal. like last time. everything back in place. but now the ignition button is not responding. does not receive at all when pressed. and the device does not turn on. we are not masters. The first time maybe we were just lucky with the repair. can you maybe give some advice? thank you very much

[@Kyperman97]

Hi! Where did you order this part from mate?

[@davidlogasi1835]

Hi Kyperman97 I ordered the part from this online shop: www.partshub.co.za/

[@bengrigg3584]

How long have you had your machine before it started to leak?

[@davidlogasi1835]

Hello, and thanks for watching. I used the coffee machine for about 16 months before it started leaking. To be fair, I must admit that we are drinking a lot of coffee and using the machine frequently.

[@pricajmotomato8463]

Hi. the device leaked. we have opened. Heater connection broke. we replaced it and put everything back together. everything was working fine. today the device leaked again. took it apart again. one transparent tube separated. which brings water to the latte go. and when we put it together everything seems normal. like last time. everything back in place. but now the ignition button is not responding. does not receive at all when pressed. and the device does not turn on. we are not masters. The first time maybe we were just lucky with the repair. can you maybe give some advice? thank you very much

[@davidlogasi1835]

Hi pricajmotomato8463. I'm sorry to hear that your coffee machine is giving you problems. It is possible that water from the pump sprayed the electronics and, therefore, created a short. If that is the case, I would imagine that you will need to replace the control panel altogether. I'm almost certain that this part is available online or, alternatively, you can take it to a professional technician in order to assess the damage.

[@RowanHayes-wh9ge]

At 5:58, under the orange hose (bottom right), there is a white hose running from top right to bottom left. On my machine this pipe just hangs loose and water runs out. The rest of the machine works fine so I am assuming this is waste water. If someone opens their machine, would they let me know where this tube is meant to plug in to please?

[@davidlogasi1835]

Hi Rowan. The hose in question should be connected to a white connector. If you look in the video at 05:40, there is a part with a green and white sticker on the bottom left of the coffee machine, and right beneath it, you will see the connector for this hose. It is hard to spot it because it runs slightly forward in the machine and then twists back. I hope you'll come right.

[@RowanHayes-wh9ge]

@@davidlogasi1835 thank you David - appreciate your response. Wish you a happy life

[@user-kr6li3bu6y]

יא אלוף! איפה קנית את הגומיות? ועוד שאלה, יש לך מושג איך מוציאים את כל החלק שעליו הגומיות? פתחתי הברגים שלו וזה עדיין תפוס. יצא לך במקרה לפרק את זה?

[@davidlogasi1835]

היי גד. הזמנתי את הגומיות מדרום אפריקה. אני מניח שתוכל למצוא את את החלפים באמזון. השארתי לינק לאתר שבו קניתי את החלפים אך אני לא בטוח אם הם ישלחו לך אותם לארץ. תסתכל טוב על הוידאו ותוכל למצוא את הברגים הנסתרים. זהירות לא לשבור 😉

[@user-kr6li3bu6y]

איזה תותח תודה על התגובה, אז חוץ מהשני ברגים torx יש עוד ברגים? חחח@@davidlogasi1835

[@user-kr6li3bu6y]

@@davidlogasi1835 וואללה .. כן סבבה אין בעיה באמת להזמין מחו״ל. רציתי לשאול אם יש לך מושג איך אני מפרק את כל החלק הקטן הזה, אמרת שיש ברגים נסתרים, יש מצב אתה יודע איפה הם ומנסה להסביר לי? אני לא מצליח להבין

[@davidlogasi1835]

@@user-kr6li3bu6y אני שמח שהצלחת להסתדר ולמצוא את החלפים. גם אם אנסה לנסות ולהסביר זה יהיה כמו עיוור המוביל עיוור. פירוק המכונה היא פעולה טכנית ועלולה לגרום נזק אם אין לך את הידע הנדרש. צרפתי לך לינק של סירטון שיכול לעזור לך להבין איך המכונה בנויה. מקווה שזה יעזור 🤓. kzbin.info/www/bejne/inXNe2NvmLyDnrcsi=MC5W4cnOo1-upTH6

[@user-kr6li3bu6y]

אחלה אחי תודה רבה. הסתדרתי @@davidlogasi1835

[@yasminejasmine4368]

Mine keeps saying no water but the tank is full. Any ideas?

[@davidlogasi1835]

Hi Yasmine, I would start by checking the water tank. At the bottom of the water tank, there is the hose connection, which also incorporates water level, which might be blocked by hard water calcium or dirt. Try to clean the water tank with vinegar and the hose that connects to it from the coffee machine. If it fixes the issue, I would also consider decalcifying the coffee machine as well. I hope this will help.

[@pricajmotomato8463]

Hi. the device leaked. we have opened. Heater connection broke. we replaced it and put everything back together. everything was working fine. today the device leaked again. took it apart again. one transparent tube separated. which brings water to the latte go. and when we put it together everything seems normal. like last time. everything back in place. but now the ignition button is not responding. does not receive at all when pressed. and the device does not turn on. we are not masters. The first time maybe we were just lucky with the repair. can you maybe give some advice? thank you very much

[@user-xy6is3fq9n]

עכשיו אני יודע כיצד לתקן את הדליפה 🕺

[@Justin-kt2ch]

P r o m o S M

[@gerdsmits7591]

My Philips HD7769 leaks at the bottom. A very common issue on forums. Maybe manufacturers have to stop producing products that will certainly break so we will buy another one. I 'm buying myself a traditional coffee maker with nothing electronic or moving parts. Oh ... and F you Philips!! F company.