No Coffee? Troubleshooting a Philips Superautomatic (Nozzle Leak)

Рет қаралды 77,829

Күн бұрын

Пікірлер: 111

@jhlim6161 3 ай бұрын

The best video, I searched because the water was leaking and there wasn't enough coffee, and this video had the answer. Thank you~ I'm surprised at Philips' low durability. I'll have to buy another machine next time.

@vladimirkollar Ай бұрын

Two months ago I didn't know anything about coffee machines I got a free coffee machine on videos like this I was able to fix it thanks for your videos

@mateus285 4 ай бұрын

Thanks

@TomsCoffeeCorner 4 ай бұрын

@@mateus285 Thanks for your support!

@jeanletourneau9642 7 ай бұрын

Went through, the whole video. I don't even own one. Still I enjoyed. Troubleshooting is a process you can learn from different products and different issues. Lots of plastic in there…

@Gellein71 2 ай бұрын

Thx... had similar issues, and I searched for a video to help me dismantle the machine. Saved me a lot of headaches ☕️🤠

@OliverLopezF 7 ай бұрын

This content is gold, thanks!! Cant wait for our machine to break just so i can open it 😂

@frog_can 18 күн бұрын

Your video is priceless! Please continue this kind of video.

@sagauer 6 ай бұрын

DON'T take the front off! If you look at the nozzle, carefully remove the left and right chrome parts, then take off the front nozzle part with the logo, lastly there is a little top cover that comes out, I just used a butter knife. Now you can clean the inner (box), I also used a dust spray to nuke the nozzles and any opening. It is kinda disgusting, that so much gunk accumulates in there! It is easy, but be gentle with the plastic parts. I also blew some air into the hose... guitarstring like suggested might work also.

@HedbergHenrik 5 ай бұрын

Thanks for the tip, I managed to clean it as you described, without opening the whole machine.

@dawidek20000 5 ай бұрын

Thanks, my coffee machine would not drip any coffee out of it after 4 years. Your tip has saved my machine.

@zippo1992 4 ай бұрын

Thanks! I cleaned the nozzle that was completely stuck with your tips! I used a degreaser and toothpicks

@Hernaner28 3 ай бұрын

any videos you can recommend to do that? Im not gonna do what the guy in this video does obviously

@ReckyX Ай бұрын

Thanks, the buildup in that compartment was disgusting. And then to think that with every cup it runs through that sludge, no wonder my coffee tasted like bongwater. Managed to clean it with a small paintbrush and lots of water. Coffee drips are coming out straight again and I can taste the difference. Shocking this is not common knowledge

@SerfonteinL 7 ай бұрын

Thanks Tom, I really enjoyed watching this video. Well done Tom.

@1AmElectricman 7 ай бұрын

Thanks Tom, when my coffee-machine broke, I fixed it myself too 🙂. Also, this clogged coffee-outlet can be taken apart, I think you should clean it properly

@TomsCoffeeCorner 7 ай бұрын

Hi there! Yes, I should probably give it a deeper clean after taking it apart. Thanks for the tip!

@philmr7 3 ай бұрын

Super helpful video so I could do the same thing with my Gaggia Cadorna. Unfortunately it wasn't the same issue but was able to clean out the nozzles nonetheless. Thanks for all the details!

@VictorDodon 4 ай бұрын

Thanks you for the video, it gave me information to find the problem in my case: the o-ring from the brew group which was ripped the water leaked inside.

@mihaimarin6929 Ай бұрын

Thank you so much for all the debugging!!

@denitsarusenova 4 ай бұрын

Thank you!!! With your help I've manage to fix my machine!!! :)

@TomsCoffeeCorner 4 ай бұрын

High five!

@zzarek2 Ай бұрын

Thank you! I had the same issue, and now it works!

@tiagomoura9666 6 ай бұрын

thanks for the video. In my case, the hose that leads to the nozzle had come off, I had to disassemble the machine to fix it, but it worked 100%.

@TomsCoffeeCorner 6 ай бұрын

Glad it helped!

@linachan7731 Ай бұрын

Thanks for the video and the comments I now have a working machine

@fatimabajwa-wj8rw 4 ай бұрын

Very good gentleman ❤❤❤❤❤❤❤

@Schiksie 4 ай бұрын

Very nice :-) found out my coffee outlet on the grinder broke off completely 😁. Used your video to take it apart!!

@TomsCoffeeCorner 4 ай бұрын

Glad I could help!

@Schiksie 4 ай бұрын

@@TomsCoffeeCorner yes but the problem remains so thats very strange. So I replaced the broken coffee inlet on the grinder. I can make 1 cup off coffee without any problem but than on the second cup ( after the grind , that all seems to be fine) a loud ticking noise will come from the machine. Strange thing is that when I use the pre-grinded coffee option it's working fine. So only at the second cup when using normal beans it will start ticking like crazy and no coffee comes out. I even tried a whole new brewing unit and same problem....also on the second cup the loud noise like someone is shooting a gun 😁😁. So it's not the grinder, it's not the brewing unit.....I have no clue.

@tomasl6675 6 ай бұрын

#fixit Great video, thanks for showing the insides of the machine! I just bought a 2200, works like a charm!

@Finite8614 4 ай бұрын

knob removal at 8:02 - did you simply just pull up hard on the knob, or is there a trick to removing it gently? Really appreciate the excellent video

@bendyb8034 21 сағат бұрын

Is this vid proof that it's kind of important to use the cleaning tabs every month and other weekly maintenance?

@fsicakyuz Ай бұрын

Nice video, thank you. However, I must mention that it was clear from the very beginning of the video that this was the problem: The dripping continued due to the residual pressure in the system. You could have just cleaned the front part without completely disassembling the machine. Nevertheless, it was a good video in terms of showing how to disassemble the machine.

@ivicatasik7923 Ай бұрын

do you ever clean coffee grinder from the residuals and oil from coffee?

@monicamonca7430 2 ай бұрын

Hi. I have a little problm. Those 2 leds on 5400 lattego, are still inside of the body. I can see one of them through the hole, but i dont know how can i take them off and put it into place. Wating for ir answ. A lot of thanks! 🙏

@marko93ns 27 күн бұрын

Question for @tom's I have a similar machine, 2230. My problem is that it makes hot water alright, but it doesn't make coffee anymore. It just grinds the beans and then wastes the beans and the water. Any tips on where to look or what to replace? Thanks!

@felipeclemente 5 ай бұрын

I'll try this solution on mine. Thanks for the video

@rish0201 22 күн бұрын

Hello Tom! I really need you help! I have an issue with Philips Lattego 5500 fully automatic espresso Machine. The machine is brand new and during my installation itself I’m getting Error 5.. Air is trapped inside. The machine prompts me to remove the filter from the water tank, empty it and refill with just water and re-install. However, the error remains the same. I purchased the machine from the US and have got it to India.. so have trouble with warranty. Please could you suggest what I should be doing? Thank you.

@ecaterinamarianagy5261 3 ай бұрын

Hy,tks for the info,how about the 3 led error?Any advice?

@stephenk2895 4 ай бұрын

My only comment. When you removed the grind nozzle, did you have to make sure that you put it on exactly the same way so that you don't throw off the alignment?

@SimonAZ 7 ай бұрын

Do you think it is a design flaw that you cannot take the nozzle off more easy to clean it now and then?

@HomesteadAce 7 ай бұрын

Its more like by design; this is an appliance and not a machine. Ironically I know acquaintances who bought proper "coffee machines" only to go buy a new machine when it breaks. In their case the coffee machine came with a grinder built in but when it broke, rather than fixing it, they went and bought a standalone one.

@robertcercel 7 ай бұрын

Nice work!

@hunt3r088 Ай бұрын

I have another problem with this machine. When it starts after few hours being off, it immediately shows 3 lights blinking error. If I turn it off and on it will eventually work, and it will not trigger any error unless it stays off for a few hours. The machine is not leaking from nowhere. When it delivers the coffee I noticed that the coffee flow seams a little intermittent. The other nose, hot water, delivers perfect flow. Tom, can you advise me how to try to diagnostic?

@tuntematon82 7 ай бұрын

I dismantled that front nossle without taking facia out. It's mostly decorative and there is box where coffee comes in and drips out either side. That box fills up with dry out coffee as machine does not let enaugh water through as it cleans out when shutting off. So no need to open complete machne for that.

@tuntematon82 7 ай бұрын

Also, silicone hose that comes under water pump wears as it rubs against internal wall and starts to leak. Machine makes HUGE noise as pump does not have back pressure because of leak.

@goran.subotic 6 ай бұрын

You have some instructions for dismantling front nossles? Thx.

@tuntematon82 6 ай бұрын

@@goran.subotic it is a puzzle, but decorative parts just unclip out and then you can wash bowl where coffee comes as it still is attached to machine. Easy job, just go for it.

@goran.subotic 6 ай бұрын

@@tuntematon82 I'm gonna break it so bad 😂 but thank you 🙏

@goran.subotic 6 ай бұрын

@@tuntematon82 btw. What should I unclip first, top or front part? Thx It seems very hard to unclip or I'm doing something wrong.

@georgeoprea1028 Ай бұрын

Greeting. I have a small problem with the espresso machine. I didn't have coffee beans and I would use ground coffee. I resumed with beans, but my coffee flows harder and harder. What should I do? Thank you very much!

@NorthshopsalesMeilleur 27 күн бұрын

I just moved in Canada weather . It got left outside with no water in the bucket but internal lines froze ? Guess I tried too soon and now it won’t flow out at all and I see steam coming out back left of the unit near the top ? Days late still same issue .. ideas ?

@s96822 6 ай бұрын

trick to clean small lumens. acoustic guitar strings. the 3 thickest strings are very good at cleaning and dislodging debris and minerals. these strings resemble the guide wires used for vascular catheter introduction (but cost much less). you can bend the end a little so it rubs in the lumen. these strings are akin to a mini roto rooter.

@TomsCoffeeCorner 6 ай бұрын

Good tip! I’ll have to try that.

@lcanelas87 5 ай бұрын

Thank you very much for the video. Do you have any videos replacing ceramics to grind coffee?

@TomsCoffeeCorner 5 ай бұрын

@@lcanelas87 No, not at this point. I think there might be some other good videos about that, however on KZbin. Good luck!

@lcanelas87 5 ай бұрын

@@TomsCoffeeCorner thank you very much..today I found one video and it's very simple 😅

@petrpeter2603 Ай бұрын

hi everybody! Thanks Tom for nice video, really helpful. Do you please have a solution for the issue, that caffee comes out not straight? I mean there is a problem to catch the coffee into a small cap. When the machine was new it was much better. Thank you

@Nate-N_official 21 күн бұрын

Had that too. Fill the machine with water. Put a teaspoon drain unblocker (yes i said that) in the lid where grinded coffee goes in and choos coffee without grinding for several times. You'll be surprised how much dirt comes out. When eventually the water comes out clean and straight down. Run it a few times more. After that you are good to go. Off course make sure there is no drain unblocker left behind in the lid...

@DaporotiYat 6 ай бұрын

how long after use does this problem happen?

@coreyluffler7797 5 ай бұрын

Thank you so much! I’m having the exact same issue. Got my project and video for this weekend. #fixit. Do you think there could’ve been and easier way to just get to the nozzle if you thought that was where the issue was? I know and appreciate you took the whole thing a part to troubleshoot but could I short cut the process of taking a part the whole machine if it’s the same issue? Thanks in advance for any tips and super helpful video. Great job!

@Racingforblues 7 ай бұрын

well done

@DeeKym 5 ай бұрын

Great video!

@christianc5122 7 ай бұрын

Hi Tom great video as always! Was wondering if you could review the Illy ground espresso Maschine. Seems like a pretty decent espresso Maschine but no one really reviewed it properly on YT. Would love to hear your thoughts!

@RemoChiodi 2 ай бұрын

3:20 "water get pressed into beige colored piece and then it goes up into the Brew unit". But how is possible that? Beige colored piece isn't closed at the bottom, isn't it?

@EVR1AL 20 күн бұрын

Yea machine moves the male part there each time.

@Emin.kirkali 3 ай бұрын

I use a 43 series device. It does not give water only when pressing Americano. I did lime and general cleaning. It gives it once or twice and then cuts off. Is the problem the valve?

@MAn-mt2mg 7 ай бұрын

I'm glad you #Fixit 🎉

@oscarvicente7484 Ай бұрын

I have an issue with this machine, 3 pilots flashing lighting. I clean everything but it seems like the motor of the grinder doesn’t work. Any sugestion?? Thanks in advance!!!

@scm4375 5 ай бұрын

How often does this problem appear in Philips 3200 machine? Do you know cecotec Cremmaet Compact Steam? If so, what opinion do you have about showing up problems? Thank you so much

@وحیدصادقی-د7ك Ай бұрын

Hello, good day, how are you? Please help me. I bought this device and when I was starting it up, I encountered an error. 14:37

@4lifgraffiti 28 күн бұрын

hi is normal to have water in tray i always left cup under the nozzle and still have water in tray is philips 3200 model brand new

@TomsCoffeeCorner 28 күн бұрын

Yes, there will always be some water in the tray - the machine does periodic cleaning cycles of the brew group. Cheers!

@dgomes265 6 ай бұрын

Interesting that despite the machine purging water through the sprout at start up and shut down, the nozzles got plugged. What could have possibly clogged the nozzles Maybe a cleaning with the cleaning fluid ahead of scheduled every 5th filter replacement may have helped.

@TomsCoffeeCorner 6 ай бұрын

Yeah, I don't know. It was working fine, and then I descaled it. Maybe I dislodged something in the lines while descaling.

@EVR1AL 20 күн бұрын

Servicing these plastic machines is like dentist cleaning operation through the ass. But convenience of easy morning coffee beats the Cafelat Robot types. Thanks for excellent video.

@TomsCoffeeCorner 19 күн бұрын

Haha, nice comparison. Workflow is very easy, and they last a long time if you use good water and descale regularly. Cheers!

@EVR1AL 19 күн бұрын

@@TomsCoffeeCorner yep reverse osmosis or use their Aquaclean filters which lasts for 95 liters.

@LoganScottY 7 ай бұрын

Hey could you help me understand why my Barista Touch Impress isn't pouring evenly on each side of the portafilter spouts. I really want to enjoy a single shot espresso but I'm aware that using the single basket won't be as good an idea. Should I just look at how one of the spouts pours out and just go with the cup that has more in it or should I change something?

@TomsCoffeeCorner 7 ай бұрын

Have you checked your machine for level? Also, how’s your distribution and pick prep?

@LoganScottY 7 ай бұрын

@@TomsCoffeeCorner Well I like to shake the portafilter a bit before using the assisted tamping. Should I not bother shaking it? Should I just tamp immediately after grinding? and I believe my machine is level. I'll need to double check

@TomsCoffeeCorner 7 ай бұрын

@@LoganScottY Ah yes, the Impress system. I guess you don’t have a lot of room for puck prep, unless you use the Breville funnel and WDT, then remove the funnel and then tamp. But I would check to see if your machine is level first.

@carlosluisbr Ай бұрын

Can anybody tell me the size or where to get the replacement o-rings??

@roland8775 7 ай бұрын

I feel like you've opened up so many of these things, you probably know how to build them from scratch lol (Tom's Coffee Machines?)

@XavierDeclerq 4 ай бұрын

any for a watertray not being able to be detected?

@TomsCoffeeCorner 4 ай бұрын

If you watch towards the end of the video, you will see the microswitch assembly behind the fascia. The water tray pushes up a rod, which presses against the microswitch. Cheers!

@Dcastfan 25 күн бұрын

Mine is dispensing coffee but not milk. What could it be?

@sariaiesh1124 7 ай бұрын

Hallo tom's ,please Can you do a review of a coffee machine (Cecotec Espressomaschine Barista Power Espresso 20 Barista Mini) thanks

@Eiramilah 2 ай бұрын

#fixit. This might help with my old Saeco machine.

@zzzwinWin0905 3 ай бұрын

I bought 4300, trying to replace my breville 870. I tried all setting, manitience but It will never get a good quality expresso in a rich body and complex flavours like sweetness and fruity taste like Breville or other semi-auto machine. 4300 could make coffee taste better than an instant coffee but far away from any cafe quality, I will say it is not a great extracting like the grinder setting is not fine enough even though it's already the finest in the machine. Grinder approx Philipss 1 = 6 in Breville. please let know If you guys can make great coffee even close to the semi- auto machine with fully auto machine, or just my 4300 having some problems, or which brand and series you are using. Am I asking to much for an auto machine? 😂