Fixing Nitro Truggy Differential Issue | VRX 1 Truggy

[@TheRCBiker]

Lots of people have been wondering why I'm yet to post videos of the VRX 1 Truggy. Well... Turns out I had issues with the rear diff! In this video I show you what went wrong and the repair process.

[@acerig4675]

Still sounds loud. Mesh needs adjustment, add shims or move those two around. Thanks for sharing.

[@thetoddperspective]

You didn't discuss shimming, which is possibly the cause of the problem in the first place.

[@paulnutland7360]

Mines just done exactly that just curious what weight dif oil would you have used

[@bismillah349]

Hi I have a 1/10 cyclone pro nitro, I was driving it fast and lost control and crashed it ( not very hard ) and now when I Rev it the revs go high but the car won’t move it will move for a second or two but the just stop and just give high revs, also I noticed when I Rev it I can hear very loud slipping noises from the centre spurs but can’t make out what it actually is if you could help??? It’s a two speed

[@kevinj5293]

Good video Josh enjoyed watching. I replaced the glow plug on my torro today to a b4 hot running 20% nitro winter is coming done a pinch test first it cut at 4seconds then once it was a little warmer 5 to 6 seconds think tuning is ok now runs fine starts first time once warm.👍

[@TheRCBiker]

Nice 👍

[@LawrenceTimme]

Looks like diff shims were on the wrong side.

[@TheRCBiker]

Before or after rebuild?

[@LawrenceTimme]

@@TheRCBiker before

[@TheRCBiker]

@@LawrenceTimme well that's how I put it back so we'll find out what happens!

[@LawrenceTimme]

@@TheRCBiker rip. Will probably strip again. Diff shimming isn't as important on a nitro as an electric as the torque is much less, but if it's a long way off it will still break the gears. Looks like it had 2 on one side and none on the other. I suspect it's supposed to have one on each side.

[@marklatham1414]

I was wondering why he didn't try and detect why the gears were stripping. Just rebuilding it won't keep the issue from recurring.

[@Southwest.rc.bashers]

What part number is that for the diff

[@acerig4675]

Mesh is loud. Shim adjustment. Thanks for sharing.

[@YOVlogs]

How come you broke this in 6th tank the gear quality is worst for this VRX buggy i had the electric version of this same buggy and i also broke the gears very quickly aftet purchase so what is the fix for this problem i check parts there is one gear which is metal gear but little bit expensive than the original one planning to buy one

[@TheRCBiker]

The gears are already metal, it could be due to a lack of grease in the diff. Or more likely is just the quality of the diffs. Since replacing it this new one is still running fine, no problems.

[@papazola5300]

The tire have a high quality ?

[@coway2you317]

Hey josh. What is the highest temperature on an nitro engine to the point before it become over heating ?

[@TheRCBiker]

Don't get too worried about temps as long as it's running well

[@stevenmillar8810]

hi rc biker just a little update the bosh tool bag should arrive between 15:00 - 17:00

[@TheRCBiker]

Hi Steven, it's arrived! Thank you :) You will see it featured in upcoming videos

[@stevenmillar8810]

@@TheRCBiker no probs keep the exelentane content up

[@Blair-zq8jm]

Hi I was just wondering if a cheap pullstart from Ebay or Amazon would be any good

[@thetoddperspective]

No no no. Those strings are brittle af. If it fits, and you replace the string before you install, that's your best bet

[@project6287]

hello do you have a dif for a Losi speed 2 NT ? i cant never find it in holland... thx allot and a spur gear.

[@TheRCBiker]

Sorry, no

[@luismalotewjdjjdjdj7629]

Buenas tardes eres bueno llo tengo dos truggy y un Hyper uno es un lrp y hotro es un cen truggy de competición los tres un saludo gracias

[@jayhow997]

Do you know what the cause was ,was it to much side play in diff housing or just cheap monkey metal .

[@TheRCBiker]

I would say just cheap monkey metal! The mesh seemed ok to me

[@johnbibby3305]

Are them wheels a 17mm hex?

[@TheRCBiker]

Yes

[@DonCarlosGrilo]

Hello! I started with nitros rc with these one, made break in and tune up thanks to the videos!! I broke the center differential, I live and spain and I'm having a hard time finding pieces for this model. Can you help me on this one? 😉 cheers mate. Also thinking if maybe a 2 speed upgrade is possible?!

[@TheRCBiker]

Hi there, Nitrotek UK sell some parts

[@DonCarlosGrilo]

@@TheRCBiker thanks for the reply and help. Didn't knew the website, find some fine upgrades there. Anxious to receive them!

[@adamspitfire]

I've never had diff issues with my hyper 7 but I crashed a wltoys a959b and split the diff in half then just glued it back together lol

[@TheRCBiker]

If it works it works ;)

[@Dazwillett]

It’s concerning how it failed so early. Hope it’s ok now or could become quite annoying for you 👍

[@TheRCBiker]

Should be ok now :)

[@gamingdude88lovegaming66]

Hello it’s Rhys cool vid 😎

[@pierrechartrand7773]

please make more i realy like your video .......please come back pierre canada

[@ryanprins3146]

Umm no oil In the diff guess that's OK for bashing

[@TheRCBiker]

There is never much oil on these chinese ones ;)

[@dailyriddenhorses7665]

Hi how are u

[@TheRCBiker]

I'm good, you? :)

[@Win-ym7oj]

👍

[@TheRCBiker]

Thanks for watching :)

[@whycs3]

Hi

[@TheRCBiker]

Hi, how you doing ? :)

[@whycs3]

@@TheRCBiker am good! A started nitro For a few month so am new to it but your videos are just amazig!!!!!❤

[@radyradox7704]

Hello from MY

[@TheRCBiker]

Hi, how you doing ;)

[@srimantakamar641]

Hi.freendyou.nobengli

[@srimantakamar641]

Youverybiuteful

[@TheRCBiker]

Thanks

[@srimantakamar641]

@@TheRCBiker .freendyouer.facebook.have.plij.youernametelmi

[@bigkahuna1850]

Dude just buy losi or other racing kit stoping wasting on cheap nitro rc

[@TheRCBiker]

can't remember the last time I bought a car they get sent to me for free. Nothing is better than a freebie!

[@Imperial_Wing]

Hi

[@TheRCBiker]

Hi, how you doing ? :)

[@Imperial_Wing]

@@TheRCBiker hey good, you?