Fixing the starting system on our RZR Turbo S!

Project 168 (2018 RZR Turbo S) gets the starting system diagnosed and fixed.
Buy your parts here: sxsblogparts.com
Buy OEM parts here: www.rockymountainatvmc.com/?r...
IG: SXSBlog
Facebook: SXSBlog
Patreon: Patreon.com/sxsblog
Garage channel: / @sxsbloggarage

[@Boostedgsx97]

Matt is such a humble dude and goes through these repair videos so well. Sous is always a great addition to any video. Great work guys! Keep it up.

[@Stuckin330]

Lol wow all you cry babies shit it still the blog an if your complaints are on here in comments then you were never loyal . The real OG peoples stay no matter what an don’t join the band wagons of complaints .!THERE YOUR DINNER

[@wesleymadsen4357]

Sous is high lar ious

[@wesleymadsen4357]

@@GK-gr2mx Douglas Butterfield and sous need to do a funny video together. No interruptions

[@pamwitt497]

love the videos

[@timwarf2737]

Best video so far for this channel! Matt and Sous working together is awesome! Definitely need more of these! Seeing Sous getting his hands dirty is the best! Keep going!

[@ruyguy8888]

Working in the shop on a crappy day with some friends is always better than staying at home. Id turn some wrenches with these guys any day.

[@MCC0NN377]

168 was the best unit this channel had. Turbo S will always be the best looking rzr. Back when you guys were modding it often and jumping, racing the content was awesome.

[@tristan6351]

100% agree.

[@hotrod95svt]

Seeing 168 back on the channel immediately took me back to the video with Frankie coming out of the box truck on the dirt bike. Then the whole discussion about Frankie wanting to buy 168 from Sous. Too funny! 😂

[@dvagswim]

So good to see Nick S back in the saddle.

[@den8894]

This brings sxsblog back to when I started watching the channel from the beginning. Fix or upgrade and rip it! This is how it started. This is how it should be. I love it!! Keep them coming!

[@TylerMifflin97]

Love seeing 168 please please bring it back!!!!!!

[@michi_danksta]

Thanks for the entertainment. Cool to see these og machines are still ready to work and give us a grin

[@samwilson1767]

I love watching and learning about these issues. I really enjoy this channel. Please show more of the work behind the scenes. Thanks

[@chickenhawk212]

Hot take: sxs blog garage is the old sxs blog, just some friends wrenchin on something and then screwing around in the yard with it

[@RandomRedd]

No matter what is going on with the crew, I love you all!! Ive been watching since the battle grounds!! I hope we get some answers soon.

[@koljag5]

These videos are even better than the main channel.

[@erikcolon413]

I don't think it feels forced. Keep the content coming guys. Love what you are doing and hoping the channel keeps running and I'll be here to watch you every step of the way!

[@davidream136]

Loving the old style videos with educational content and silliness with Sous!

[@stevekalis3963]

Glad good old 168 is burning right! Helpful video.

[@Christman2819]

Nice to see guys working on machines and explaining. Then get to rip and enjoy ones hard work

[@MyChava69]

Glad to see the turbo S back

[@ZenonWaszczuk]

That machine made this channel famous!

[@brittraney1]

Good to see you guys.

[@easternrider321]

Good video! Awesome seeing the turbo s out again

[@brianmorgan3526]

168 is back 😮

[@ChevroletTough]

168 has been my fav car for sure. What a ripper magoo!

[@timbarton6150]

No better way to wait for a cyclone to hit in North Queensland, Australia than to watch these vids. Thanks guys👍👍🇦🇺🇦🇺

[@A-RSpeed]

Wish Doug would touch on his comment on Ostacruiser's post. It was put out there for the world to see, but the post was deleted. Let's tear that bandaid off!

[@4wd35]

I missed that

[@19cougar87]

He posted comments on cleetus's page too but those have been screenshot lol

[@andrewgray945]

What did Doug say??

[@mattbob6350]

Please elaborate more

[@DaltonGeee]

Doug calls Leo a lying manipulator. And then Steve said something to the effect off “when you start making money watch your bank account.”

[@rustysiler8904]

Glad to see that car back it's a really nice rzr and rips

[@beatymcfierce9436]

You guys need to start bringing videos like this back of you guys ripping, I thought that was the whole point of the new shop, quit pussyfooting around and tear that track up and start hitting some different venues and also cars like 168 or the yxz you need to capitalize on the content because those are the most entertaining machines!!!!! Come on boys!!!!

[@1kered88]

Nice seeing the garage channel getting love again!

[@chancedonaldson6049]

Well that explains why I haven’t see 168 for months

[@robertboullion5136]

Great stuff guys keep it up!

[@WVRaider]

Love SXS content so much more than sleds. Good video guys!

[@C0nn3r69]

Sous looked right at home in 168. Luv the videos guys

[@bennyschmetz6902]

Love everything use are doing it don’t matter if use lose members from the team use just brush it off and keep pushing 👌

[@bigc3723]

I started really watching you guys about 5 years now, and it's because of the turbo s actually both turbo s's Doug's blue one too anyways anytime sous rig comes out I get excited BTW my favorite rzr from polaris

[@tysonchase2143]

Finally, project 168 is back!!! We expect big things, Sous. I hope the blog is okay...

[@_DJ708]

Mud Jam Aug 12-18 2024!!! Got the hint you guys will be there and possibly sponsoring the show? Or helping advertising? Sweet!!

[@dustinnorris584]

Great video! Keep it up you guys

[@AndrewIanWeir]

Great video!

[@shrapnelsbunker736]

Sous would make for a good intermission show at the Toughest Trucks Tour monster truck show this March in Saginaw...

[@tristan6351]

Love these repair style videos. Also Matt, post your affiliate link to that Lisle scraper or even better yet, put these kinds of tools on your parts website.

[@xnorcal831x]

This machine is amazing. If I had to pick a two seater, this would be my choice. Super cool toy.

[@KjellOlavForberg]

Love it when the Sous lets loose!

[@therealjplavoie]

Nice boys!

[@KrazyD]

Hell yeah project 168

[@garynaylor670]

great info thanks

[@nismogsus6297]

I love the turbo S

[@scotthansen1287]

Love the Blog Garage videos. You guys are doing a nice job filming these. Do you have enough trucks and trailers scattered around to run into? Kept waiting for it. LOL

[@rhettwieghat3358]

I have had the one way bearings go out, nut on reduction gear come loose, but I had one come in that multiple shops could not figure out, little ether it would fire right up other wise it would just crank & crank .. low and behold the starter clutch was starting to go out! 30 min later it started up like new again! cleaning that gasket material off sucks tho!

[@genebond]

I really enjoy watching these videos of fixing the typical problems on these machines. Have you replaced many Polaris Fuel Pumps?

[@robbystewart8088]

Rock on!

[@pullman24]

Loving these kinds of videos. Just waiting for Steve to make one putting his X3 back together. Big Dog vs NOS X3?

[@18FORLIFE-THEB]

Love the video Matt........Wish i lived closer, i'd be hanging with you dudes.....

[@0xXAllForNothingXx0]

Ysll timing is awesome. I just traded my highlifter ranger for a built turbo s dynamics. Great video

[@TALENTLESSOFFROAD]

Turbo S 4 life!

[@Hastings_Racing]

Same thing happened to my rig a couple months ago found all the heads of the bolts lol went and got heavier grade bolts and used a bunch of locktite 😂

[@Gbronson]

I know there’s a lot goin on but I’m super glad to see videos thankyou guys… I have a video request not sure if it’s possible but I would love to see mc mega rippin there’s not much snow here in the mitten might be fun.. thanks again guys you’re awesome

[@brooksjeansonne8344]

Must do a track battle in the snow!!!

[@GearHardoffRoad]

Come check out moxc this year in michigan and do a xc race challenge!!! Would be awesome!!

[@turbodean4843]

When it started there was some engine noise it sounds like a loose timing chain i have the same turbo s and mine was very loud until i replaced the chain tensioner, worth checking it caused metal shavings in my oil too.

[@Dr650rob]

It should use countersunk Allen head bolts

[@BigE-Adventures]

Your Oldie but a good machine is better then my best machine lmao well I only have the 1 but trying to break in the youtube game with my little 900 trail.

[@twistedsxs2426]

Not sure if you switched cameras but it’s super distorted if you’re wearing ear buds, pretty much unwatchable. Ol 168. Love that car.

[@turbo558]

What turbo is in that thing i forget, it sounds sooo good!

[@scotttrombley4803]

Nice

[@Minicoopermaniac711]

I wonder if it needs a compression release, think of a hot start on the older 4 stroke dirt bikes. Just a thought

[@jacobfoulds7618]

If you guys need another shop hand, I’m more than willing to come out

[@Stuckin330]

On my z 400 I had this problem about 5 times it happen then I got the quad couse the owner before me had it … I ended up using stronger bolts an didn’t use the Allen bolts it called for . Better grade bolts with strong lock tight an it never happen again

[@Jizden_Mipanz]

We need a nick sous drum solo video!!!!! Do it!!!! I know from a past video that he's a fan of BTBAM so the chops should be decent with this one.

[@looneylonzo28]

I had a similar issue before not exactly the same thing. It was on my big red It would sheer the starter teeth when it kicked back. it ended up being a timing issue the first time and worn compression release the last time. it was definitely a pain in the butt. don’t know if they even have a compression release on the machine but if it’s done it for every single motor that’s been in it I would have to say that’s going to be in your maps on your ECM did it do it when it was bone? Stock untouched is the question I would be asking.

[@dandibble5867]

Happened to my 2018 Turbo

[@dougflatt8150]

Doug needs to find a new secret place now for his stuff eh lol

[@RocksNRuts4]

where did u get that green snapon coat matt? a 1 off from them to you? I want one! n where did u learn to wrench?

[@notimegarage8632]

Can you guys try to put a 4 stroke sportsman or 4 stroke scrambler motor in an older snowmobile?

[@Coeblooded_racing]

You guys should ls swap a can am

[@LetsGetWEIRD199]

Can we swap a turbo r in that thing?!? Love this machine more then anyone you guys have.

[@atctraveler6218]

Have you guys had issues with the header bolts stretching and breaking on that big turbo?? Can't get them to stay in now..

[@dangerdave3954]

Most i have every seen nick work lol

[@iam106racing2]

The idler gear and shaft is the way I've always done it and to remove the starter is a pain in the dick! The gear on the fly wheel spins freely just turn that gear with the starter and idler in. You guy are making this job a lot more complicated then it really is.

[@charlesfritz2540]

Hey guys, I love seeing Nick back on the channel. But where the hell is Leo?? Is he still part of the channel ?

[@RTOutdoors]

Hey Matt. Sounded like either a C or C sharp to me 🤓

[@jaredlange]

it kicks back because of compression boys

[@jaypee9657]

Look at that snow....where is 2nd chp sled challenge!! Cmon qwiffys let's see dat shit

[@sxsoffroad43]

Sous is back doesn't want to get fired too lol

[@clementerodriguez3413]

They couldn’t succeed without sous I believe

[@toolsaregreat2]

What about an intermitent no start scenario same unit and year with good battery?

[@rc_dude2641]

"Some say im tone deaf" 😂😂😂

[@joepedraza7192]

What ever happened to the track you guys were building ?

[@derbearblaz]

How does red loctite and sheard bolts mingle? Y’all should elaborate

[@sdick01]

This exact thing happened to me last summer on my 21 turbo. Counter sink the holes in the one way plate and put tapered bolts in it. It removes the slop on the bolts so it cant kick back. Oddly enough, I was at crossbar in OK. Spent the weekend pull starting off the clutch 😅

[@ArchwayPerformance]

Why is that oneway bearing held on with three bolts and the sport atv’s held on with 6 or more bolts. Weird.

[@jamesswick7534]

I like Matt. He needs his own channel

[@brettrorrik]

That’s the last thing we need.

[@rafaelvillanueva7403]

Care to share the performance mods done to 168?

[@NCMATT]

Is that the same motor as my 900xp highlifter ranger?

[@rwb1764]

when are you guys going to send out the traxxas rc trucks? see theres still a pile of them in the background.

[@chriswalshtv]

Hey what’s up bros how y’all doing much love

[@daniels6643]

What happened to the cheap sled challenge all gone when Leo left no one seems to know what they're doing .

[@ChaoticNeutral36]

Thank the Gods that Doug Joey Steve and Justin weren't in this video. Well Done Matt and Sous

[@kellyhay79]

Hi guys, like Mike said, maybe heading in the wrong direction…not necessarily. New stuff is awesome but, What about a cheap sxs challenge. $2500-5000 limit? Bring back the old school bashing. Would be a sweet series. Lots of people like and own old stuff. What can we do on a sxs budget?

[@SamIam420]

#168!

[@H.D.ventures]

Are those motors always that mechanical loud ? Sound’s weird

[@brokesxs2547]

Make the yxz 72 inch ? Or 80 maybe!?