fixing the tec-9 jam.

here is the main reason the tec9 has jamming issues.

[@pops55650]

Thanks for this. Another thing to try out on my Tec-9 . I have 3, two work pretty good, but the 3rd not so much

[@davide1652]

Just adjusted mine, hopefully this works, heading out to the range tomorrow

[@bigexpress6412]

Sweet that has worked out good for me. Bring some tools to the range with you in case it needs a little adjustment. You don't want it too loose or too tight on the shell casing.

[@bersinarselamanya2023]

What size is the spring diameter and how thick is the spring wire?

[@rhodycars6058]

Great video!

[@doughnuts6801234]

Is your extractor straight or is the corner a little cut down?

[@bigexpress6412]

It's a standard extractor.

[@jeroldpickard947]

It's hard to do with the wrong tool

[@ExcuseMeWhileIWhipThisOut]

Thanks for your video. My extractor certainly needed adjustment and it had noticeable carbon buildup. You appear to have an early Tec-9 since it's lacking the screw end cap on the upper receiver. Mine has the same and its SN is 012XX. Besides the extractor adjustment, I also polished the feed ramp as mine was not firing reliability but here's hoping my work today did the trick. I'll know next weekend. Thanks again.