Fixing the Work Sharp Ken Onion Elite Mk 2

[@stevenchisholm2364]

Worksharp did put alot of thought into the Mk 2...but not enough!..the observations and solutions you have shown should have been picked up and resolved before its release to the user!...great video again!

[@simplysharpatl]

Thanks. I’ve probably sharpened 150 knives on my modified version. Other than getting the belts on and off, it is a better tool in all aspects thus far.

[@lastshadow9351]

Good job! Seeing the way the guard mounts, you could really get it down to almost nothing, but now at least you've gotten rid of most of the fluff that was interfering. I do see a couple of routes to go with on the thumb lever, but you've probably had enough trauma from this tool surgery for a bit-lol! I'm sure someone will do a 3D print of a super slimed down piece that has the degree markings and uses just one screw, leaving it really open on the side. Now you have a Ken Onion Elite Pro MK2 Work Sharp. I'm super grateful that you showed this mod, because it really gave me a good look at what's in there and how everything works in relation. It's a clever but flawed design and most of that has to do with covering things up so it has a slick look to it. Probably a younger designer that's worked in the auto industry and not familiar with the KISS method of design. Keep It Simple Stupid. As soon as I see one on sale or maybe an open box model, I'll be picking one up. Thanks again!

[@gregorysmith3097]

This may be a stupid question, but can it not be run without the plastic guide attached?

[@kelleyhogan7063]

You did a great job, and I am sure you will not be the only one. I will wait and see how you get on with it over time before I decide whether to replace my old one .

[@markurbano3504]

Love the modification Nate. Always impressed with your content, ideas, and thoughts. Would love to hear feedback after using the MKII some post modifications.

[@ruftime]

Thank you! Proud owner of modded #462. As I expected, my harbor freight foot pedal won’t work with the new mk2, but at least it’s a bit easier to lock on continuous vs mk1. I wish it wasn’t powered on, if plugged in, but for my application it will be plugged into a 2kw power bank, that is powered off between stops.

[@ruftime]

6:34 Apropos : adjective very appropriate to a particular situation. MK1 helping to make the mk2 better…..like a parent😎 Great job…… everything is better modded. Greetings from SoCal.

[@simplysharpatl]

Thanks amigo!

[@Mrplacedcookie]

@@simplysharpatl I'm thinking the IRONY when you did that grinding. Thanks awesome video.

[@MemeScreen]

You madman. I can't believe you did it so fast!! Also thanks for the mention. I hope it works out well.

[@bobekdj]

@SimplySharp, any chance you want to post a response here or an update video since its been 2 months... Any problems with the mod you have run into? Things you would have done differently if given the opportunity? Appreciate the content, I am a new Work Sharp user (have used the WickedEdge and other systems for a long time)... Only a few knives into using the Mk2, but i'm amazed at what a stupidly sharp edge the Mk2 gives me even compared to the WE130... not to mention its a tiny fraction of the work needed to get that edge.

[@simplysharpatl]

@@bobekdj done.

[@bobekdj]

@@simplysharpatl awesome will watch here shortly !

[@MewThanan]

My belt is torn, is there a way to reconnect it?😅

[@zaheerkader7426]

nope. not safely anyways. buy another and save your eyes

[@brianfoster7064]

It seems like you can run it without the cover without issue.

[@jab0321]

That's what I was thinking, is there any reason to have the plastic cover on there at all? Actually I think you need it for the angle reading.

[@fluffykitten5773]

Where do you get that bench mat?

[@simplysharpatl]

It came with the Precision Adjust Elite.

[@fluffykitten5773]

Thanks for the response. I have no sharpening gear and am trying to learn all I can before jumping in full send.

[@simplysharpatl]

@@fluffykitten5773 I’d recommend against full send. Buy a Work Sharp Ken Onion or a Rikin variable speed 1x30. Both are good and inexpensive. Sharpen a hundred knives on them. Then start charging. Sharpen a thousand knives as a business and see if it’s right for you and you can make it work. Then get into more equipment if necessary. Email me at [e-mail] if you want to connect. I do offer a business in a box service, but happy to answer any questions for free as well.

[@barkingspider2007]

Keep on the lookout for 3d printer version of the plastic bits... Thanks for the video. (I subscribed to your channel) 😎👍

[@simplysharpatl]

Thank you!

[@TheMobster450]

Why not leave it off

[@pbunt1911]

The grinding angle indicator is incorporated into the part.

[@plibani4248]

I guess at Work Sharp they are expecting professionals to buy multiple machines, so they don't have to change belts while working. More consumption, more money etc.

[@fuelediowa]

Sweet. Thank you for sharing this. Too bad you have to fix a new updated $300 machine to be as as easy to use as the old model it is replacing. Lol

[@simplysharpatl]

Ha. Yeah. Other than that, it is better in most regards. As I’ve been using it more and more, I’m really digging the ability to adjust angles while it’s running. The cruise control is pretty sweet.

[@fuelediowa]

@@simplysharpatl I am concerned on my downward pressure. This may sound odd but I feel I use the tone of the motor bog to keep a consistent pressure. Not that I use much pressure just enough to make sure I get a consistent convex. If that makes sense.

[@simplysharpatl]

@@fuelediowa I get you. Sound is gives important feedback when sharpening. However, I’d suggest if you are bogging down the motor, you may be using too much pressure. Sometimes it’s called for, but I find light pressure is typically the way to go.

[@simplysharpatl]

@2216sammy it’s my new favorite feature.

[@KnivesParacord]

You mean modifying. Because fixing represents something that is broken needing a repair. This is your of your own choise to do this. That makes this a modification, not repair.

[@simplysharpatl]

@@KnivesParacord I guess I should have made a before video titled “Fixin to modify the Work Sharp Ken Onion”.