Fixing Up All Broken Things on the Flagship BMW 7-series - Alpina B7 - Project Chicago: Part 13

In this episode of project Chicago, 2008 Alpina B7, we are fixing everything that's broken on the car one by one. We replace front and rear shocks, left side mirror power-folding function, replace door shock bushings, remove rear sun shades, fix soft close, sticky door handles, replace rear quarter window rubber seal, interior mirror auto-dimming, etc...
You can support me on Patreon! - / m539restorations
T-Shirts, hoodies & mugs - teespring.com/stores/m539-res...
Follow me on Instagram - / m539_restorations
Aqua (vapor) blasting cabinet - www.vaporblastingequipment.co...
Find Liqui Moly oil and additives for your car - www.liqui-moly.com/en/service...
BendPak lifts - www.bendpak.com/
Luuk, BendPak & Quickjack Europe - liftmotive.com/
Massive thanks to Radu from RT Design Studio for making new merch happen! - www.rt.md/
Email: [e-mail]

[@aakashmasand4299]

The B7 has to be one of the best modern day restoration series I've seen on KZbin. It's amazing how you keep viewers so transparent on the process and so called 'mess ups' that you encounter along the way. Much love and respect to you as always, can't wait to see it fully done ❤️

[@bruettingmarcus]

Check out LegitStreetCars CL65 videos - similar ups and downs 😇👍🏻

[@gingerbadger]

Got to say, this is like waiting for a really good series to air. Love it

[@terrencemkhululigxamza2472]

Addictive content...

[@MrFaizProject]

I knowwww rightttt . Man I just really love his content .

[@josedasilva4433]

This is top notch. Better than TV anyday.

[@FalconXE302]

Too right... and the anticipation levels grows as the days go by, waiting to see the fun and games Sreton has been up to... Love it.

[@ralebekomaine6894]

He makes it so much fun

[@karraguer]

55 minutes of pure joy. I can't explain why I'm so hooked on Sreten's meticulous (and epic) restorations. Thank you!!

[@dingdong2103]

After all this work the engine will grenade on him again and again...

[@SkarTisu]

The car is interesting. I love his approach of using genuine/OEM parts in most cases. Seeing him use correct torques makes me smile. On top of all that, he’s funny and humble about his work. I’m really glad I found this channel!

[@sharpelecuochelari]

Sreten, I'm pretty sure you were told this before... ...but, man, you are an inspiration for all of us petrolheads (BMW fanboys) out there! Thank you from the bottom of our hearts! P.S. May you live long and prosper!

[@tyler951]

He’s back, he really likes us! 🤣 I didn’t know that 55 mins of Project Chicago goodness would be on offer as entertainment tonight (7:30pm) in Texas. A very welcome surprise!

[@mausplan3890]

and 1.00am in Bangkok, about to head to bed and up Streten came, so nice , great way to spend 55 minutes and to see him get the little things working ,

[@FYonchev]

@@mausplan3890 and 5am in Bulgaria and same thing happend now i will head to bed happy due to me seeing that

[@r1m374]

000⁰0

[@r1m374]

0000⁰⁰0000

[@r1m374]

0

[@StraightSixGarage]

The breaking beer bottle at 1:30 made me laugh a little harder than it should have... haha

[@chriszichriszable]

zis was a professional german move! 😆

[@mikealanzo]

it's 02:20 AM and I'm enjoying myself.... without using a tissue or white stains.... You're the man Sreten!

[@osagyefoghanaba]

This channel never disappoints! Can’t wait to see the restoration of the e92 M3 as an e92 owner. Thanks and keep up the good work.

[@jkhsdjkhfjkhh3]

I have an F87 and am desperately hoping he gets to those generation of bimmers soon.

[@pieterverboven4853]

More More moooreeee! I love how you tackle pretty much every issue all in and succeed to fix them every time. Fixing things is way more satisfying than replacing parts. Sadly nowadays manufacturers (not only those who make cars) don't like to give that opportunity. I drove an E65 LCI 730d from 05 to 08 and loved it every minute, those comfort seats are the best ever made never had back pain or whatever. I once had the driver side door mirror cap catching on a ledge in a tight parking spot when backing out of it (concrete pillar), it just flipped off. Later I realized BMW engineered tiny clips to break when this happens to keep the mirror cap itself in 1 piece. Buy couple of those tiny clips and the cap seats properly again.

[@poplaurentiu4148]

Well i'm pretty sure he would replace with brand new OEM parts as much as he can but in some cases the factory do not make any more particular parts, so obviously are becoming hard to find specially brand new (or too expensive because they come as a whole kit) so fixing the broken parts in such cases must be made because is the only available option (like in the case of the small plastic pin for soft close in side door-mechanism glued with super-glue)..

[@pieterverboven4853]

@@poplaurentiu4148 Sure. I only wanted to express I really appreciate the sort of in depth way of fixing broken things or making 1 functional example out of 2 things (like the RHD/LHD door mirror) OEM is always best for new parts obviously.

[@WiiPhonedo]

Just got the notification, I just wanna thank you for all the content that you’re creating for us! Kolay gelsin from Turkey!

[@jouleskelvin]

I second that emotion. From 'merica.

[@DeadEndRestorations]

Amazing work! Although not as badly, my V8 BMW also disintegrated on its first drive, video here kzbin.info/www/bejne/hYeXeamMidWZidk

[@bkirkbir]

Yalama

[@michaellangdon8347]

Ditto from me here in Tasmania, australia

[@misterweedsmoke]

Eyy, nice to see that Sreten is recognized in Turkey, I second your kolay gelsin wishes!

[@hitardo]

47:07 The Liqui Moly "Smeerfilm" spray is the know in English as "Tacky Lube Spray" Liqui Moly's internal article number is: 2518, which you may use to find it online.

[@blunt3777]

If there are any KZbinrs videos I absolutely Love and cannot wait for its this Channel! Absolutely Gold!

[@chrisp.2544]

Just in time for lunchtime, I get a glorious hour of a broken BMW reassembly.

[@erqadezz]

Hours on your films always go so quickly 😄 great job as always man!

[@amadafaka]

This has to be one of the best presented car channel. He keeps my attention with his comments. I find him hilarious.

[@Andy_Dines]

These videos will serve as a great reference for all kinds of BMW repairs for years to come!

[@McMaster1500]

It's been a long journey with ups and downs with this car, but glad to see it almost finish! cant say it enough, but well done once again Sreten.

[@briananderson5634]

Your courage in tackling complex issues is mind blowing! I love your honesty and humility!

[@BaldyTheOnlyOne]

One must appreciate "right to repair" - awesome work on putting the driver side mirror assembly together!!

[@houseofno]

My favorite BMW youtuber. Thank Sreten. You give hope to all of us who love these old BMW's.

[@TheNorthernmunky]

I will never know how you take so many things apart and put them back together!!! Absolutely awesome

[@d-d-i]

Once had to replace that rear door small glass to '89 Corolla. It literally required you to loosen one screw on top of the doorframe to move the vertical bar away from the glass. After that, the glass just slid out. Talk about the contrast on the complexity of such operation compared to this! Great video as always.

[@aserta]

Yeah, but you can't compare the trim level between a Corolla and a modern BMW. You can't compare it even with an 89 BMW. That's the thing. Doesn't excuse absolute gobshite quality of materials and the fact that some of these assemblies are intentionally made complicated to make it difficult to repair them at an owner level, but that's the long and short of it.

[@sasa.radovanovic77]

There is nothing better than being on vacation and watching your videos/thx👍🏻

[@discodiana1984]

The engineering on these cars is other worldly and I love your videos. I also gain greater appreciation that I own Toyotas.

[@sbgsbg6694]

I am amazed at the amount of work you have put into this car. Your talent and humor speaks for itself.

[@Danydaniello]

Amazing episode! You fixed so many issues it’s unbelievable, also I think this was the least expensive episode on this project you had so far, even considering that you replaced suspension :)

[@johnnychimpo7539]

The b7 was the least expensive?? I think you are forgetting which car this is. This car is on it’s 3rd engine

[@adogmcdizzle]

@@johnnychimpo7539 least expensive episode

[@johnnychimpo7539]

@@adogmcdizzle lol true, I should learn to read

[@zn_361]

you do it because you love it, and it shows.

[@B7stuff]

I'm glad I wasn't the only one struggling to press in those door rubber bushings. They can be pretty stubborn to press in sometimes. Well done Sreten!

[@Trulstor]

Thanks for another episode! Perfect way to start the day. Cant wait for the bodywork correction video. This car reminds me of the Project Dubai how ugly that looked and how beautiful it ended 😃

[@somanyteapots]

You're an inspiration to watch, man. As someone who dreams of working on cars all the time, it's cathartic to see you do so much and so well.

[@thecraziestbear]

Never owned a BMW but i have watched every episode. Bravo

[@goodlessnaren]

1 Hr alpina man. This baby needs attention.Thank you!

[@KaylemXx]

Definitely my favourite KZbinr!! Love these videos, the painting the wheels black part had me in hysterics (I don’t like black wheels either). - Kaylem from Uk

[@charlie1832]

I’d love to see a video of you and Alex (Legit Streetcars) working on a car together

[@Sharkeezy528]

This is my therapy. I can watch this and not understand a thing but will end up relaxed.

[@oldschool1993]

Those auto door closures are a hoot- You can imagine the owner having to give instructions to everyone who gets in the car, not to slam the door shut- a source of endless frustration to anyone with teenagers.

[@a20axf]

Well this was a great way to kick off Monday; watching Sreten whilst drinking strong coffee! You're right about the small details and that's exactly why I fix these small things on any cars I purchase as it makes the difference. Finally got my auto-dimming mirrors working in my M140i on Saturday and I was over the moon.

[@Whatisallthisfor949]

You video’s are incredibly entertaining and good, thank you! I also really understand now why many people stay clear of oldish 7 series BMWs packed full of technology that goes wrong after some years. The amount of door/ mirror/ sensor faults you fixed on this one car is enough to sink the economy of a small nation if it had to be done by an actual garage. They would probably do bad repairs anyway as I’ve discovered watching your videos… 9 times out of 10 the old repairs on this cars are terrible.

[@bobsky7583]

better than other car builds youtuber he actually builds not like 50 parts videos 90% bs i love this dude

[@speedrobby9451]

Such an amazing serie about the "Chicago Project" you have created! I love how you pay attention to all the details. In one way I dont't want this serie to end.. But I'm confident we'll see a very happy end! 👍

[@Sevlagoth]

I just discovered your channel and what an amazing piece of work you have here. Not only is the mechanic’s side of it top notch but your editing and entertainment value is great too. You’ve got a talent there! I’ve been binge watching video after video. (My wife didn’t complain yet) 😂 Keep up the great job! Cheers from Portugal

[@vaclavsmetana6226]

That “Cooming up” always makes my day

[@Kowalski401]

Always liked BMWs… but the amount of things broken on this car is mindblowing! Even though it does not look to have been abused..

[@roblubelski422]

Great work on the mirror, the effort you put into that was impressive. The rear doors….. wow! Now that’s engineering. Your effort and attention to detail is mind blowing. Great work as always, love this channel.

[@st3althyone]

Goddamn Streten, we sure missed you! I’m glad to see you’re doing well and still kicking ass. Project Chicago is looking fantastic. The skill and tenacity you’ve shown in bringing back this turd back to life. It sucks that it takes so long to get your episodes out to the masses, but we prefer quality over quantity. I can’t wait to see Project Chicago finished finally finished so that you’re able to move on to the rest of your livery. On a side note, about the problem with your soft closing issues on your doors, those are usually caused by a limit switch going bad. They can get clogged or malfunction, so don’t throw the one you took out. You might be able to salvage them by doing a deep clean or replacing the limit switches, which are usually interchangeable with other models. Good luck, and see you again soon, mate. 👍🏻✌️🏻🥰

[@Knorsky]

I watched every minute of your video... Usually i dont watch full videos on YT but yours i like.. everything is clean and tidy...

[@mann8109]

I drive a Nissan Xterra, never owned a bimmer, but i never miss Sreten’s any video. It’s so refreshing to see the love for automobiles around the world.

[@amirjubran1845]

Great presenter, great footage, great restoration.

[@alex.b6474]

42:59 The mirrors laying on the Knoppers got me laughing 😂

[@zahoorillahi1249]

I see some other KZbinrs are trying to copy your format and even the cars you're fixing! Imitation, flattery, etc. But you're the original and best, great seeing you work. The only negative about your channel is the time in between videos! We need more and quickly and more and every day...and more!

[@rodneyalleyne6747]

My name is Rodney. I’ve been watching your KZbin channel for more than 2 years now. I’m the owner of a 2006 750 LI and I love it. I’m hoping to replace the valve seals and other needed repairs on my favorite whip. You make it look easy doing all of the repairs you’ve done on the B7. Thank you for all the information that you share. I’m a retired automotive technician and a dropout from BMW school. I would like to make my 7 look as good as your B7. Wish me well

[@nandosillamartinez26773]

Sreten man, watching you at work is soooo captivating and fun to observe... thanks a lot for all your hard work on the cars and also the top notch editing !! One little trick about cianoacrilate (superglue): it gets really hard and effective when there is no space in between the pieces to glue, i think it's because it reacts with lack of air or something. Try to fill the tiny gaps and extra residue with bicarbonate powder (the one used for cooking and bad digestions)..... it gets super hard and durable, and you can sand it later to make the piece even better. These modern cars with so many electronic unnecessary devices are mechanics and owners nightmare. Good that you fixed all that shit. Cheers and keep that garage running... we love it!!

[@gettcouped]

I can’t believe you are really fixing one of the most unreliable technical disasters in history! This is truly an amazing project that shows if you really want to do something, love doing it and have good friends to help you, you can make anything happen!

[@iantyler4045]

Like you said "It's the little things" but so many. That Beamer certainly is in the right hands.

[@RayFanful]

M539 Therapy for car guys since ----- Awesome stuff again.

[@Mitchell.Is.De.Naam.]

I'll be damned if you're not gonna keep that E65 with all the work you've put in it, or you would have to get a insanely good price for it.

[@startingtech3900]

his last 740i sold for around 24,000 euro he always gets a good price

[@1chish]

Just a gentle mention that @15:26 your amazing attention to detail let you down my friend. You didn't refit the anti roll bar after bolting up the shock absorber. So many improvements but how rewarding to have those soft shut mechanisms finally working was THAT ?

[@M539Restorations]

I left it off on purpose, I can't torque the shock bolt with sway bar link in place.

[@1chish]

@@M539Restorations I just KNEW there would be a reason but I thought better to say something just in case. Hope you didn't mind

[@M539Restorations]

@@1chish of course not. Thanks!

[@dillanmistry]

The smallest things make the biggest difference

[@incognito-nb7fq]

Imagine how much you could have spent on the e36 track car instead or any other project with the time and money spent on the B7, mad respect for sticking to your guns.

[@totote]

I was wondering, how the Inspection went so smooth with the shocks so damage? They dont check that? Cheers from argentina.

[@M539Restorations]

That was explained in the previous video :)

[@endiqunaj3693]

Can I have a knopper

[@Wasmachineman]

BMWs are definitely not my thing but Sreten's humor and sheer dedication is what keeps me watching. Love your vids m8

[@violinmiata]

This is one of the finest automotive KZbin channels that there is. Can we have an entire episode devoted to folding BMW mirrors? Sounds stupid, but it would be useful and probably get a crazy amount of channel traffic! Everyone would win!!

[@totallybonkers]

If I lived in Europe, I would buy a pre-owned vehicle from you before any other. You sort them out completely. It's like getting a brand new vehicle. Fantastic work. It's very nice to see someone taking pride in their work.

[@mstorrente]

No one is gonna see the diferencie, but we will''....you are a MASTER

[@Driver2397]

Wow I could watch u all day you really should have your own TV series your so talented.

[@maciejszajnicki4479]

Sreten rocks. I admire the patience.

[@Snarl616]

M539 Restorations is probably the best Wheeler Dealers' heir. Go Sreten!

[@bebobism]

It is astonishing how the designers at BMW have to be able to work together to produce such a complicated car. Gotta admire the Germans for that. Great job , as always Sreten.

[@dankpotato5993]

I love how you used the spring to break free that rusted shock

[@roadwarrior144]

A crossed-thread is a STRONG thread! LOLZ. Amazing work as usual Sreten!!

[@rsrookie1]

so many broken BMWs, this channel will last for decades :) . Once again, chapeau

[@rideislife192]

I usually do not watch long videos without skipping inbetween. But your videos are always entertaining so I watch them without skipping. Thanks for producing such videos

[@onzinlife]

If this were on Netflix, I'd binge watch it!

[@dereklawson945]

Brilliant… perfect timing on the upload. Something to watch whilst The Wife is watching The Love Island final.

[@mikeywilz]

My favorite channel on KZbin. Thank you

[@rezaq1]

Streten, your attention to detail and patience is fabulous mate

[@alexmacdonald4270]

You have such attention to detail, that’s why I love your channel Streten

[@peterwhitehead2453]

This man is the brain surgeon of the automotive world

[@Rockport1911]

Thumbs up disassembling whole doors just to replace a small rubber seal :) Details like this will make this B7 the nicest one in germany if not europe.

[@franksaint-ghislain9010]

I have been watchin a lot of your videos, mostly for entertainment. You have a good sense of humor... and I guess you really need it doing such complicated repairs... I love looking at cars but I watching you work on them keeps me from buying into one I can't service myself...

[@azmiescinex500]

Finally. The long wait is now over. Definitely the best YT I ever subscribed. 👍🏻👍🏻👍🏻

[@nwbee4692]

Bro I have been glued to this channel. I am at work and cant wait to come and watch the rest of the videos. I work on cars myself but not to that extent.

[@martingilbert1780]

That was very satisfying watching the power mirror successfully fold. This is such an amazing channel. Keep up the fine work!

[@pancho8334]

Can’t wait for the next episode! Interior overhaul!!! Yes!

[@coyotesmokey7447]

I always have the feeling that I want to live in Germany after watching a new episode. I love this channel . Signed, A balkan brother

[@michelswerissen6544]

Got the popcorn ready drinking coffee...............yesssss.

[@AtanasTodorov]

As i tackle issues on my e53 i must say - MAN YOU GOT A LOT OF PATIENCE! can't wait for next episode!

[@AlexanderMichelson]

You are a Serbian legend, Sir! God bless you!

[@olDirdey]

For the repair of the softclose mechanism one more tip. If the plastic can not be welded with a solvent-based adhesive, then use good adhesive for the plastic and additionally stabilize the parts with metal. Either melt a brass mesh from the outside over the repaired area or stabilize it with metal pins. For example single bolts from a paper stacker are suitable for this job. Drill holes on both sides of the break, slightly smaller than the object used for stabilizing, and then melt it in with a soldering iron. Use the same method for the mesh.

[@Rapsutin]

Every episode on this project chicago has been entertaining!

[@revinot]

One thing this series has thought me is to stay away from 7-series BMWs. Excellent walk through and repairs @M539Restorations!

[@paulmulligan1411]

The best videos because Sreten knows just when to go fast motion and speed things up, while filling a video with the interesting bits we want to see - the perfect balance! His commentary is always spot on, never forced and frequently funny.

[@malekzin4788]

I never liked the E65, but somehow you managed to make it beautiful. Bravo !!

[@azizhachimi8744]

Sreten, I LOOOVE you story telling, your "genius" impersonations, your way of working on your cars,....in word, everything related to the content you create on YT ...There is absoluelty NOTHING not to like, if not admire, and, trust me, I am astonished to how come you dont already have 5M+ subscribers...Your content is BETTER than the actual Top Gear and on paar with the old one, and, of course, light years ahead of ALL the rest! Keep up the great work my friend: we send you our love and best wishes of health, wealth, joy and prosperity from Canada!

[@RedUnit10]

The caulk gun bit got me good, because I know all too well of the pain you can get in the forearm from squeezing that thing over and over again.

[@rcp2bTube]

1150 comments on a 3 day old video? That's crazy good engagement. Hats off to Mr. BMW

[@triverbike1368]

Pure relax, plus I learned a ton of tricks (that I'll never use because I'm NOT even a BMW fan...). Thanks man!

[@mortentorgerritsland6587]

Hello Sir. Don't usually comment on KZbin videos (one of yours was the latest) , but I can't help myself any longer. This is the only channel that makes me laughing out loud! I love the humor, the sarcasm and "dry british humor" (No offence to either the British (I Drive a MG) or you), I love it! Keep up the good work!!

[@marksantos2276]

Sreten there is a reason thousands of us flock to your channel every time you post new content. We get the benefit of learning right along side you. You fix the soft close door and we learn what to look for and how to fix it. Same with the small glass in this episode. Now we ALL know we CAN do it