iPad Pro 12.9 LCD-Digitizer Repair From Start To Finish.

[@TuanAnhTPBQ]

I have not finished the whole video yet, but I do thank you for taking the time to share your skills & knowledge. This looks and feels like a tough job. Cheers!

[@jabroknee7270]

This has got to be the most thorough and best IPad Pro 12.9 screen replacement video out there. Great detail. Thanks so much.

[@FixItPlanet1]

Thank you

[@4254457618e]

So you don’t even have to solder if you’re replacing the screen off a good existing model.. right? Cuz it will also have the ribbon on it.. someone clarify.. is it just the replacement lcd that won’t have the ribbon stuff that needs to be solderer?

[@916hayabusa]

Excellent walk through, I have mine to fix, when I can find a reasonably priced replacement.

[@slavistoyanov432]

Thank you. I was not prepared for this kind of challenge.

[@simo4825]

Thanks a lot, you helped to solve a home button issue , not clicking well, on 11:59 when i saw a missing black circle rubber from my home button

[@Kuasm]

I was willing to try this until we got to the microsoldering part. You lost me at "I'll have to use my microscope for this". Otherwise, fantastic video- thanks!

[@rongzhao6236]

nice video, thank you , excellent job there, luckily , this new screen replacement now come with the daughter board preinstalled

[@hassansinanan9698]

Thanks for the tutorial, good sir. My first iPad Pro 12.9 and it was successful. Thanks again

[@FixItPlanet1]

That's great thank you!

[@dawsondemontiney1247]

@@FixItPlanet1 is it possible to replcae the glass/digitizer only? Or do you have to replace the lcd & glass together?

[@FixItPlanet1]

@@dawsondemontiney1247 Short answer No... Long answer yes It is possible but not practical. I would not bother to do that, just replace the whole assembly. It's a waste of time and a lot more work.

[@efraincanedo7790]

My friend, it was a very helpful video. I appreciate your effort to explain in detail the procedures. I suggest/recommend a flexible camera holder. That in my opinion well be the last divider between a good video and the best video.

[@FixItPlanet1]

Thanks for the tip!

[@dusty4640]

I’m watching with my iPad Pro 12.9 that has lines

[@headleadJ]

Thank you for the nice demo Nice job! I am glad that I ordered the display with Assembly because I don't have the tools to take the old assembly to a new display. :D

[@tawat3322]

Thank you so much. It's so useful to learn the inside of IPAD 12.9.

[@DeeboComing]

You lost me at desoldered. That's when I knew this was a no go for me.

[@SULTAN-ef9jp]

Thank you for nice job

[@FixItPlanet1]

Thank you for that support.

[@cromekunal]

Great video. Thank you. Bless you for helping others.

[@Rudy2ms_channel]

Can you use a blow dryer to heat up the sides?

[@ZZKJ396]

Sh*ty Apple, imagine you bought a new car with the bonnet welded shut!

[@creativevisualsnewzealand6723]

Thankyou!

[@FixItPlanet1]

Thank you! too!

[@eyes2videos]

What temperature use on soldering, Pls?

[@HenryBlackwell]

you did not apply adhesive back to the ring of the home button. surely it just moves around inside it cannot be stuck in place.

[@norayole856]

Hi. I have trouble with desolder… it doesn’t work :/ it just won’t leave so easily as you show. Any idea?

[@FixItPlanet1]

OK really? You are talking about to bearded dragons

[@machytka]

why was the Microsoldering required? Did you break anything? The display itself is connected only with flex cables !

[@TheAmazingAhmed]

Hello dear sir and thanks for this remarkable video. Why do we have to take the flex cables along with the pcb ic board and resolder it while we can just take the home button? Does the LCD display not come with the flex cables and pcb ic board that you removed and soldered? Or are the cables and the PCB IC board linked to the motherboard and must be used because they are proper To the motherboard just like the fingerprints kind of thing? (I mean just like Each Touch ID corresponds to It’s motherboard, and can only be used with that unique one.) Hope that makes sense thanks in advance!

[@FixItPlanet1]

That is just the way they are sold. I don't think they are paired with the motherboard but I could be wrong I haven't actually researched. If they are it would be even worse if it was damaged your tablet would be rendered useless.

[@TheAmazingAhmed]

Fix It Planet appreciate the reply sir, Yeah well apple likes to do these kind of things making it harder for us(technicians) to repair their stuff and force us to go to the nearest apple care center.. I have found some digitizers on ebay tho that come with the whole thing..

[@vietlee4290]

Did you ever found the answer to your question?

[@dennisbarcuch4392]

John, can I ask the type of soldering equipment you used? Flux, torch, etc? That’s the only place I’m hung up. I wish there could be some plug and play option for that part of the process. Thank you

[@FixItPlanet1]

Hakko FM-202 soldering station with a T-15 tip or whatever you prefer, Hakko FR-802 Hot air station with whatever nozzle you prefer. There are higher quality brands but that's what I could afford. Oh and MG Chemicals No Clean Flux Paste but whatever you prefer is fine too.

[@jayallan7885]

you can purchase the digitizer and lcd or led as an assembled piece...then all you have to do is transfer the home button and bracket.

[@thorodin3631]

what would happen if you pulled too much on the battery cap thing?

[@thomasosullivan1281]

Hello followed each step, I'm facing a problem where the Touch ID works to open the iPad purchase things etc. But the home button is unresponsive? When I click it in dose not exit the app. So using aggressive touch. Just wondered if you have had any problems like that before? If there's a fix for it? Can't find anything related to the problem online. Thank you :)

[@esadmuric7839]

Thank you.

[@MrRacine32]

Great video very detailed ❤️

[@justinetenorio4397]

Where do you buy your replacement screens ?

[@JOBAJUBA]

Alibaba for wholesale prices, but you’ll have to pay the import duty or AliExpress websites for retail prices.

[@rodneybaker5562]

i BOUGHT A NEW SCREEN/DIGITIZER AND REPLACED AS ON YOUR IPAD PRO 9.7 VIDEO. WENT QUITE WELL UNTIL I REALIZED THE PRODUCT I BOUGHT DID NOT INCLUDE ADHESIVE TAPE ATTACHED TO THE SCREEN/DIGITIZER. COULD SOMEONE ADVISE WHERE I CAN BOUGHT THE ADHESIVE TAPE?

[@yklim8181]

Hi, After screen replacement, and iOS updated to 12.1.1, it will simply restart after turning on for about 2mins, what is the cause to this issue?

[@noufalabdulla7986]

good work sir your great

[@FixItPlanet1]

Thank you!

[@roadless_wanderers]

Hi, Where can I buy a replacement lcd and digitizer for an iPad Pro 2nd gen 10.5? Can you recommend me something pleaseee? Thank you

[@TheFatboyslim]

Good job 👏

[@teambf7999]

hello, on the video about 19 minutes. I break pads. What is the name of the piece and where is it purchased? Thank you

[@user-nz7ss1qc7c]

Tell me about the heating gun temperature setting

[@thegreathitsstation]

Hi, i just change the screen few days ago and,it was that one with board so was a bit easier.Today i realized the glass for front cam was dirty and i was stupid enough to take of the screen and clean it.Now the touch screen and home button don`t work anymore :(( Did work a little bit and stopped ,and again the same few times but now doesn`t work at all the touch and home button.I did remake all the joints on the connector but no luck.Please give me an advise if you have any idea.Thank you

[@FixItPlanet1]

It's difficult so say exactly. It is possible taking the screen off damaged something in the process. It is also possible the controller board failed. Try connecting the home button on the original screen and test. (Hopefully you still have that screen fully intact). Always be sure you have disconnected the battery before connecting or disconnecting anything. If the home button is not damaged and is working with the original screen then there is probably something wrong with the controller board on the replacement screen. let me know if this helps and good luck!

[@thegreathitsstation]

@@FixItPlanet1 Thank you for you quick answer.I always disconnect the battery first,i learned from your video :) Maybe you are right and the board is the problem ,is the original board from the chinese screen.I do have 2 original boards but i don`t have the special hot air gun to take off the board. The other one i toke it of using the soldering iron but i broke the flex cable.Any tip to take off the board safe?:)Thak you

[@PublicBeats]

you have to clarify to people that the display is not original and the colors are never going to be the same, and that you can consume more battery

[@taylorauldelectric8080]

Where did you find all your little tools looks Iike a sculpture kit

[@FixItPlanet1]

Here are some metal spudgers amzn.to/2HF2NwV And here is a tool kit with metal and nylon spudgers with tweezers and screw drivers included. amzn.to/2HGIsaw

[@SURGE101]

Hi I have an iPad Pro 12.9 motherboard (working) without a home button (Touch ID)which I’m going to use to change a motherboard of a non working iPad Pro 12.9. Can I reuse the home button from the damaged one on the working one?? I know the Touch ID won’t work but will it function just as a home button?? And will I get any problems with errors when restoring?? Many thanks jay

[@FixItPlanet1]

Yes you can replace the home button and it will work without the security feature. However it is possible that iOS 11 may be fussy about the change and cause a slow boot. It may produce a pop up message at start up saying it can't initialize the security feature. A damaged home button can do the same thing as well. Give it a try. ;)

[@israelrizo5157]

Hey, what type of flux you using. I have tried using flux to flood the cable, I have used wick and the damn cable wont desolder. i dont want to pull the cable. and its driving me insane.

[@FixItPlanet1]

I am using this Amtech flux amzn.to/2qq02Zm but any flux will do. I recommend using a hot air station. What method are you using?

[@ktucker147]

It’s like you have to be a surgeon to repair these devices nowadays.😷

[@ByeTech]

Thank you

[@YCHTYS]

Does this apply for the 9.7 model? Thanks a lot.

[@FixItPlanet1]

No they are completely different

[@Altcine]

Fix It Planet is the 9.7 easier?

[@T.A.24]

Great tutorial, but just a quick question.. did the touch id work after you replaced the lcd? I was told it needs to be reprogrammed by an apple tech, but that sounds like horseshit to me. Thanks for any input.

[@FixItPlanet1]

Yes... If you don't damage the button assembly it works fine.

[@angrypanda6942]

If I replace the screen will it lock me out? iPad 12.9 2017

[@FixItPlanet1]

No simply replacing the screen does not result in a lock out.

[@angrypanda6942]

@@FixItPlanet1 thank

[@multimagic488]

watch the whole show but still afraid to try an replace my screen my self

[@rafaellaferreira6253]

placa mother a1584

[@cedricpod]

@08:30 antennas

[@MoffickMo]

How hot should I set the heat gun to? Any recommended temperature range?

[@FixItPlanet1]

low

[@lylepayne7162]

What would be the cost for this

[@FixItPlanet1]

Call for pricing 817-602-1160

[@JulianLuigiNocamasi]

can u do ipad pro 12.9 battery replacement ??

[@FixItPlanet1]

yes

[@dennisleslie]

What a stupid design. Good going crApple.