FixRTurn - Tried interrupted cutting by Round insert.

Round insert and toolholder with the exact indexing system
High performance round insert with 6-indexes suitable for roughing operation for medium to large size workpieces
FixRTurn
tungaloy.com/p...
#shorts
#cnc
#machine
#machining
#tools
#ev

[@kstxevolution9642]

The never-ending toil of turning round stuff square just to turn square stuff round again

[@mdnovaman]

Literally an every day occurrence in engineering.

[@TungaloyCorporation]

Thank you for your comment!

[@user-Dmitriy_00745]

Это не изготовление детали какой либо, а демонстрация возможностей высокоскоростной металлообработки и резцов для этого...

[@nyetu]

-ThisOldTony

[@user-vb3bp4xw1q]

​@@user-Dmitriy_00745 почему высоко..... ая - обычная скорость, ну смотря какой металл конешно, на 40х такое не пропрёт - резец сразу сядет, а чё резцы - обычный резец с круглой пластиной

[@bigiron4018]

I thought that was aluminum at first, thats some serious power on the spindle!

[@peterfitzpatrick7032]

And serious ridgidity... no chatter for such a wide cut... 👏🤨

[@TungaloyCorporation]

Thank you for your interest! This is ideal for roughing and is very economical with 6 corners!

[@sreekarprabas9123]

​@@TungaloyCorporation Hi

[@Hemantbachhamdiya]

​@@TungaloyCorporationwhat's prise this meachine please take me

[@MasterArkannor]

​@@TungaloyCorporation What is an interrupted cut?

[@bamaboyk901]

That is extremely impressive the mass it was able to remove on a single pass there at the end

[@TungaloyCorporation]

Thank you for the compliment! It is an insert for rough machining, Depending on the conditions, this kind of processing can be done.

[@dai_01_tm]

出来上がった物がどんな形になったか見てみたかった。

[@TungaloyCorporation]

コメントありがとうございます！ ごめんなさい、次回はお見せできるように撮影致します！貴重なご意見ありがとうございました！

[@ianunderwood3850]

I've used radius cutters on interrupted cuts for many years,they certainly seem to cope much better,and last much longer than a cnmg or similar.

[@patrickd9551]

Also great for cutting away welds. You never know when or if you hit a pocket (which is more often then we like to admit ;) )

[@TheCreedBratton]

Yes they do work very well with interrupted cuts. I used to use them on cylinder heads with a fly cutter and as we know those things are full of holes.

[@cerealru1069]

​@@TheCreedBratton aren't you supposed to be in prison?

[@Peron1-MC]

i suppose they gain from not having corners as weak spots. it cuts wider and doesnt focus all the friction on one tiny spot

[@issintf925]

Simple physics, the greater the cutting radius, the more durable the edge.

[@ChrisMaj]

Round inserts work great on smaller diameters where you have higher rpm. On big part, slower speed it's difficult to break the chip.

[@gabbermaikel]

if you did your job right your cutting speed should be the same. That is offcourse you can clamp your big parts wel enough to spin them at the right rpm. On small diameters its actually harder to get the right surface speed because moste lathes cant run fast enough for it.

[@gwinters6847]

no insert relief to break chip, interrupted cuts break them naturally . Mitsubishi, kennametal, worked many years back.. even ceramic than we notched on diamond wheel to break hot blue chips.. 32 feet is shop record on one continuous turn at 4200 rpm and feed for a .072" thick chip on 18" dia 6061 . whew!!

[@Eluderatnight]

​@@gwinters6847 I bet you could do better with 304

[@cheataview]

❤❤❤❤❤

[@zrakodeloco]

SFM my friend. Not RPM

[@kingginger3335]

I'd love to see the Slow Mo Guys do a video on this

[@TungaloyCorporation]

Thank you for your comment!

[@iznasen]

@theslowmoguys #theslowmoguys

[@pearlbluesoul]

Truthfully an iPhone on slow mo would work, too. 240fps would be more than enough. 1000 would be standing still.

[@pearlbluesoul]

@@TungaloyCorporation something to consider

[@bobmac9070]

A round insert is the strongest because of the radius. The larger the radius the more it can handle the interruptions. It also pulls a little more power depending on the depth of engagement!

[@TungaloyCorporation]

Thank you for liking it!

[@lando8913]

Those are some of the most satisfying chips I've ever seen.

[@TungaloyCorporation]

Thank you for the best compliment!

[@valdemarpomaleiko6852]

kzbin.info/www/bejne/bWaVqX6gpNd2hdksi=WNkDNxrLaXwOZErP

[@tamilan5553]

Power of tungsten carbide Metallurgy rules ❤

[@TungaloyCorporation]

Thank you for liking it!

[@THEOGGUNSHOW]

That is some really smooth cutting right there.

[@TungaloyCorporation]

Thank you for your interest!

[@donniev8181]

​@@TungaloyCorporationany recommendations on a good how inserts are made video?

[@TungaloyCorporation]

@@donniev8181 We have a simple company introduction movie, so please take a look! kzbin.info/www/bejne/n2TGlmCfr6dqpZY

[@pantherplatform]

Thought this had something to do with ammo manufacturing for a second

[@TungaloyCorporation]

Thank you for watching the video!

[@AnonymousBlix]

What is the cutter made out of, unobtanium?

[@TungaloyCorporation]

The material of the insert is made of cemented carbide, which is the second hardest material after diamond!

[@jesusmejia1334]

The blue steel color gets me every time.

[@TungaloyCorporation]

Thank you for liking it!

[@davidzenful]

Engineering is perfection , machining is what makes engineering possible... Beautiful

[@angieolli5022]

Me, an Industrial mechanic whos job is basically dependant on good machinists, true! If you are doing your Job right its fun, If you mess up, I gotta deal with it, Not fun

[@peterfitzpatrick7032]

Actually, engineering is ALL about compromise, perfection is expensive & often unattainable anyways... 🤔 😎👍☘🍺

[@angieolli5022]

@@peterfitzpatrick7032 who talked about perfection smartass. What even is perfect. I Just know If a borehole is supposed to H7 and it isnt, its annoying.

[@FastHemi]

i worked with a really good engineer once years ago when i first started with proto trak cnc lol. We made some really cool stuff.

[@stephenfazekas5054]

Thats stainless and that is some serious freaking load on the spindle you can hear it struggle to maintain speed yet the tool isnt chattering or getting smoked that’s impressive.

[@TungaloyCorporation]

Thank you for your comment! Since it is an insert for rough machining, Although the shape is not suitable, Depending on the conditions, this kind of processing can be done.

[@josiahjackson3757]

Am I the only one that loves the sound lathes make when maintaining a constant SFM

[@timpande6900]

No I love it.... Reminds me slightly of a turbo spool...lol

[@TungaloyCorporation]

Thank you for your interest! We love cutting sound!

[@Skwish6952]

That last cut was impressive 👌

[@TungaloyCorporation]

Thank you for liking it!

[@queueeeee9000]

It also sounded like an airplane

[@cmte.brazinazzo2061]

It's scary, how strong these tips, are.

[@TungaloyCorporation]

Thank you for your comment!

[@brucedale4465]

What a great difference from the Pakistan machinists 👍🇺🇸

[@TungaloyCorporation]

Thank you for watching the video!

[@josevazquez8485]

Imaginen a los maquinistas de Paquistán con esto harían maravillas.

[@ЕвгенийДементьев-ю9м]

Вопрос возникает только в расчетной стойкости пластины на 60 минут работы. в остальном выглядит весьма и весьма похвально.

[@TungaloyCorporation]

Благодарим вас за проявленный интерес

[@Emmeraldjaguar]

Isn't it bad for the bit to repetedly hit the edge as it makes it's cut?

[@TungaloyCorporation]

It depends on the process, but do you care about tool life?

[@TastyChevelle]

Aw man, show the final product!

[@TungaloyCorporation]

Thank you for your comment! This is just a machining demonstration!

[@norkosaurus]

How the fuck can the tool cut so deep and survive the power #smokeweedeveryday

[@TungaloyCorporation]

The material of the insert is made of cemented carbide, which is the second hardest material after diamond!

[@norkosaurus]

@@TungaloyCorporation i know what the tool is, but I’m amazed so much by how well it works

[@travisowens8602]

It looked like a bullet at first.

[@TungaloyCorporation]

Thank you for watching the video!

[@donniemorrow6672]

Look around you,in some way a metal worker was involved in all things manmade,man-made, maybe??

[@TungaloyCorporation]

Yes, that is correct. Many of the tools we use in our daily lives have a great deal to do with Cutting tools play a big part!

[@ポンタロー]

角物を丸物にするとき「い゛い゛ぃ゛ぃ゛」って声が出そうになる。チップ砕けそうで怖くて怖くてw

[@TungaloyCorporation]

コメントありがとうございます！確かに緊張しますよね💦

[@ДмитрийВысоцкий-щ1ь]

Кто может объяснить, в чем принципиальное отличие круглых пластин от полигональных?

[@dendavidov7871]

Видимо с круговой интерполяцией проще работать? Хотя сам только на скоростных фрезах такие пластины видел

[@b3astlyify]

I always liked milling, machining, ect. Idk if I would be able to stand doing it with cnc or automation. Still cool, but I just noticed no one hand cranks. I guess it's probably not that much different (Also no I'm not a boomer, I'm 22)

[@TungaloyCorporation]

Thank you for your comment! Are you cnc machining now?

[@vazk-thret]

Me sharpening my pencil so i get a better grade

[@TungaloyCorporation]

Thank you for your comment!

[@vazk-thret]

Me sharpening my pencil so i get a better grade

[@TungaloyCorporation]

Thank you for your comment!

[@jeffpatchen3337]

At least you don't have the coolant on... smh. Apparently I'm the only one that knows about inserts thermal cracking with interruption and coolant...🤷🏼‍♂️

[@TungaloyCorporation]

This time we did it dry so that you can see the processing and the product carefully! We recommend using cutting oil!

[@metalman6708]

Those RNMGs are my go to for heavy roughing or interrupted cuts.

[@taintedsasquatch398]

They never cease to amaze me how much material they can remove with how fragile they appear to be.

[@ドコカノ合衆国オハヨウ州]

切り込みすげぇ....何ミリじゃろか

[@henmich]

I love the round inserts... an almost limitless fresh spot to find.

[@TungaloyCorporation]

Thank you for your interest! tungaloy.com/us/product/turning/fixrturn/

[@ramkumarsingh844]

​@@TungaloyCorporationI have lnmu of P conditions, can I Machining P20 or Hard Material

[@TungaloyCorporation]

@@ramkumarsingh844 This tool is recommended for machining steel, stainless steel, and cast iron. Although it is a different tool, this tool can also process difficult-to-cut materials and high-hardness materials. It is also economical with 10 corners. tungaloy.com/product/turning/turnten-feed/ kzbin.infoehx5dFac1XU

[@seppukun208]

Ooooof that made me cringe. I would’ve done more passes for the sake of the tool life and lathe and the pieces, everything really. Also would’ve used coolant

[@TungaloyCorporation]

Thank you for watching the video! This is just a machining demonstration.

[@Warrior-Raz]

So much metal waste what happens to the shaven bits?

[@TungaloyCorporation]

Thank you for your comment! Inserts, tools, chips, working materials, etc. We recycle as much as possible

[@theofficialobama5434]

When the blade initially made contact with the part it kinda sounded like Mr Krabs walking.

[@TungaloyCorporation]

Thank you for watching the video!

[@battalov]

Не понимаю зачем нужно было делать квадрат перед сферой. Квадрат можно было фрезеровать после точения сферы, тем более технологическая база для закрепления есть.

[@TungaloyCorporation]

Спасибо за просмотр видео Это всего лишь демонстрация механической обработки

[@stevethompson8504]

It's simple logic to be honest .the more acute a cutting angle the more unsupported a tool tip is . But then stress and friction are the compromised factors.

[@TungaloyCorporation]

Thank you for your interest! Are you a machinist?

[@mahsheenman]

Used to cut square stock on a lathe. The fun part was the part off cycle. The noise sounded like an aircraft or something. 😅

[@TungaloyCorporation]

Did you use round inserts for machining?

[@功一郎高松]

良いですね👍 面相度はどの程度まであげられますか？ 単純な加工ほど　製品のアラが目立つので 研磨が必要がないほどの加工が出来る刃物があれば👌ですね

[@northmanlogging2769]

25 years as a machinist (retired, kinda) never really found a good use for any of them round inserts, mills or lathes, seems like they just created more work, over "square" inserts (not technically square but for cutting square corners)

[@TungaloyCorporation]

Thank you for liking it!

[@robertwest3093]

Those chips are coming off there like it's 304SS. Some of the nastiest stuff to machine.

[@TungaloyCorporation]

This time we did it dry so that you can see the processing and the product carefully! We recommend using cutting oil!

[@channelview8854]

It's got nothing on Inconel

[@yakki-691]

縦方向は自動送りだと思いますが、横方向は手動で送っているのですか？

[@TungaloyCorporation]

コメントありがとうございます！ 横送りも自動でございます！

[@carlospitteri3146]

I was expecting some horrible metal clincking at the beginning. Kinda disappointed

[@TungaloyCorporation]

Thank you for watching the video.

[@ЭдуардБеккер-к8ф]

Зачем такой большой длины делать квадрат.

[@tamma369]

Those long spirals looked bad, but I get it you only wanted to show it in an example peace.

[@TungaloyCorporation]

Thank you for your valuable opinion. I would appreciate it if you could see it as a demonstration.

[@Влад-с5м]

Как чисто выбирает

[@TungaloyCorporation]

Спасибо за ваш комментарий

[@bearleemadeit4718]

The little torx head bolt that could….

[@svogender]

Not go anywhere..!! 😊👍

[@CadeRankin2006]

Sounds like the 60Hz hum from a transformer

[@TungaloyCorporation]

Thank you for watching the video!

[@aruto_RD0410]

全然ビビリ発生せんなぁ、ビビリが怖いから大抵回転落とすんやが……（R5〜R10辺りからは235回転くらいやしな

[@TungaloyCorporation]

コメントありがとうございます！

[@РадикШарафетдинов-с3ь]

Кто нибудь уже скажите какая там подача и обороты

[@karupt422]

So it seems that just 1 point of the insert ia taking all the use? What happens to the rest that is not cutting rhe metal??

[@TungaloyCorporation]

This insert has 6 corners!

[@Monsoonpain]

What is that cutting bit made off...looks brass..but is not I'm sure

[@TungaloyCorporation]

Thank you for your comment! The material of the insert is made of cemented carbide, which is the second hardest material after diamond!

[@flojotube]

Maybe a silly question, but do you recycle the scraps into something usable? I noticed the one shard that peeled off in one long, continuous, curly strip and it just got me thinking because it looked so unique & cool

[@eddiedemartini9961]

They sell it in large buckets to recyclers who probably just melt it down

[@TungaloyCorporation]

Thank you for your comment! Inserts, tools, chips, work materials, etc. We are recycling as much as possible.

[@NoosaHeads]

Why isn't there water and detergent lubrication and cooling?

[@TungaloyCorporation]

Thank you for your comment! This time we did it dry so that you can see the processing and the product carefully! We recommend using cutting oil!

[@Hemantbachhamdiya]

Bro price this meachine tale me please

[@TungaloyCorporation]

We are a cutting tool manufacturer, so we do not know the price of the machine. sorry.

[@Dukelikestonukeonbubes]

So is that disc like tungsten or something? 0 machining knowledge here lol

[@TungaloyCorporation]

Thank you for your comment! The material of the insert is made of cemented carbide, which is the second hardest material after diamond!

[@Rustamjon.Kayumov]

Napaykani ostiga prokladkadan foydalaniladimi-?

[@TungaloyCorporation]

Yostiqcha ishlatilmaydi, faqat qo'shimchani ushlagichga joylashtiring va uni mahkamlang! Qo'shimchaning 6 ta burchagi bo'lgani uchun u juda tejamkor.

[@evanbaker10]

So cool how the spindle slows when the cutter is it a larger diameter in the part

[@TungaloyCorporation]

Thank you for your interest!

[@Stan-lq1ep]

It's out just me or does anyone else find these machines cool as hell

[@TungaloyCorporation]

Thank you for watching the video!

[@Hard-Soft]

It was so brutal and beautiful😂

[@TungaloyCorporation]

Thank you for watching the video!

[@tenjinamatsu7338]

水も出さないで削る意味は、ただ「こんな風に削ってますよ」てだけで最終目標（完成形）は何も無い。

[@TungaloyCorporation]

でも加工としてご覧いただければ幸いです！

[@jesseskellington9427]

What is the material, answer and tooling they using in this video? 😊

[@TungaloyCorporation]

The material of the insert is made of cemented carbide, which is the second hardest material after diamond! Work material is C45.

[@mcjust4049]

I guess this is impressive to people who don't do this everyday, but to those of us that do it's fairly boring.

[@TungaloyCorporation]

Thank you for watching the video! Are you a machinist?

[@archuleta1000]

Don’t threaten me with a good time🤣🤣🤣

[@TungaloyCorporation]

Thank you for watching the video!

[@jeffpatchen3337]

Can feed tf outta it cuz big cutting edge. Big radius=big feed.

[@TungaloyCorporation]

Thank you for your comment!

[@danredhorsedb]

Tool steel also. Looks fairly hard

[@soundspark]

The milling tool marks seem to suggest it's pretty soft.

[@danredhorsedb]

​@@soundsparkblue chip. It's tool steal

[@TrasherFCR]

Результат бы хоть показали 😐

[@TungaloyCorporation]

Спасибо за ваш комментарий

[@PinkMonarch.]

*leans in real close.* whatchya makin?

[@НиколайПараиян]

Одни из кругляка квадрат делают, другие обратно кругляки. Ти видео делают производители заготовок и инструмента, новый уровень игрушек…

[@TungaloyCorporation]

Благодарим вас за проявленный интерес

[@woodbrassandglass]

This is so absolutely beautiful, it almost brought a tear to my eye, almost....

[@TungaloyCorporation]

Thank you so much for your compliments! It means a lot to us to hear you say that!

[@seiya9179]

正方形やひし形の刃先しか知らなかったから、こんな丸型の刃先があることに驚いた！

[@TungaloyCorporation]

意外と知られていないんですよね、丸駒インサート！ 我々のPR不足ですね、よりPRしていきます！

[@robertuchman1716]

Why does everyone want to waste money, time and material when they can just form it as they need it

[@DX413RB8]

Based on what I've learnt, it's a hassle for miners.

[@TungaloyCorporation]

This is just a machining demonstration.Inserts, tools, chips, working materials, etc. We recycle as much as possible.

[@KP21530]

How not to destroy your tool.

[@TungaloyCorporation]

Thank you for your comment!

[@HenokWorku-h5m]

What is the thickness millimeter o the cercular round?

[@TungaloyCorporation]

The insert thickness is 4.76mm. It is economical with 6 corners and can cut up to 3mm.

[@НатальяГазалова]

Классная ЧПУ

[@TungaloyCorporation]

Спасибо за ваш комментарий

[@vor6126]

Something about a round insert looks so cute yet menacing at the same time at those RPMS

[@TungaloyCorporation]

Thank you for liking it!

[@elfireii328]

The lesson of the day is READ YOUR CONTRACTS.

[@nurhardian1317]

can you make video micro slow motion for this? 😅

[@TungaloyCorporation]

Thank you for watching the video! We can't do this, sorry.

[@JarppaGuru]

when insert broke propably your toolholder go too. that not even sound bad as our interupted cuts. that are shame shape but edges different so every corner it vut is diff. dont mill square. plasma cut it and dont have any round end to hold it LOL

[@maks1228]

Где приобрести это, дайте ссылку.

[@Alcomir]

Изготовление железных дилдо

[@TungaloyCorporation]

Спасибо за просмотр видео

[@fatguywhobreathesfire6488]

I don’t care in the slightest wether or not the machine knows where the chuck is or if the route is pre-programmed; my hair ALWAYS stands on end when I see the tool get that close to it

[@TungaloyCorporation]

Thank you for your comment!

[@yuubou1986]

切り粉が飛ぶ時の音が気持ちいい(^_^;)

[@TungaloyCorporation]

気に入っていただきありがとうございます！

[@rogerfroud300]

There's no big deal about interrupted cuts with any inserts. Decades ago these were things we avoided, because tools were poor compared to today.

[@TungaloyCorporation]

Thank you for your interest! Are you a machinist?

[@littlevivigaming4822]

I wonder how that works... doesnt a lathe cutting tool need a material stronger than the object being shaped?

[@TungaloyCorporation]

As you say, you cannot cut the material unless it is harder than the work material.

[@littlevivigaming4822]

@@TungaloyCorporation arent they both made out of brass though? Or is something mixed in to the casing to make it stronger?

[@TungaloyCorporation]

@@littlevivigaming4822 The material of the insert is made of cemented carbide, which is the second hardest material after diamond!

[@littlevivigaming4822]

@@TungaloyCorporation ahh that makes sense then

[@JarppaGuru]

we use cnmg center corners. that corner you never use anyway. box filled good sharp unuset edges. why need buy new tool xD

[@diyart336]

Vrlo odlicne plocice za proveru sile stezanja :)

[@MaxToldEm]

Holy shi what depth of cut you taking 😂

[@TungaloyCorporation]

Thank you for your comment! ap = 0.5 - 1.0 mm.

[@illitero]

Time to play the game "trailer hitch or butt plug?"

[@AndreMure-v2q]

❤magnifique good job

[@TungaloyCorporation]

Thank you so much for your compliments! It means a lot to us to hear you say that!

[@brandonelieff1158]

Thought it was gonna be a socket adapter.

[@TungaloyCorporation]

Thank you for your comment! This is just a machining demonstration.

[@BruceBoschek]

Button inserts are the cat's whiskers! :-)

[@TungaloyCorporation]

Thank you for watching the video!

[@СалаватХакимов-в5з]

А потом на какой нибудь маркетплейс, в раздел 18+, а что? Похоже 😂

[@TungaloyCorporation]

Спасибо за просмотр видео

[@ArlindBraka]

what type of metal is that yellow one cutting the other? it should be a strong metal right? tungsten carbide?

[@oguzhanpirli5834]

Bu takım parçaya tam paralel mi duruyor herhangi bir açı var mı ?

[@TungaloyCorporation]

Paralel! tungaloy.com/product/turning/fixrturn/

[@TerryRF600]

I love it when a chipbreaker really works well, sounds like frozen peas being thrown at the window and i love it

[@TungaloyCorporation]

Thank you for liking it!

[@yuukixyz3473]

完成形を想像して卑猥に思えた俺って心汚いな

[@TungaloyCorporation]

動画をご覧頂きありがとうございます！