How To Remove And Fill Drywall Anchor Holes | DIY Fast And Easy Repair For Beginners!

TOOLS I USED:
- Fast Drying 5 Minute Hot Mud - amzn.to/3FwH18O
- Drywall Hand Tool Kit - amzn.to/3omfqhY
- Long Nose Pliers - amzn.to/3pSLt9J
- Hand Held Compact Hack Saw - amzn.to/3s11OuY
- Claw Hammer - amzn.to/38jRjuJ
- Sanding Block - amzn.to/3bfeqsc
- 120 Grit Sand Paper - amzn.to/3pSbdTG
Learn how to repair BIGGER Holes on Drywall Fast and Easy! Check out my link below!
How To Repair A Hole In Drywall Using The California Patch Method - • How To Repair A Hole I...
Thank you so much for 2000+ Subscribers! On this video I will show you how to remove and fill drywall anchor holes and even holes created from various sizes of nails. I have some quick tips and tricks to remove them using simple tools around your home! This is a great DIY Fast and Easy repair for beginners!
Please Subscribe To my Channel! / fixthishouse
DISCLAIMER:
Videos produced by Fix This House are provided for informational, educational and entertainment purposes only. Please use SAFETY precautions when following the tutorials on these videos. Viewers doing projects at their own home are doing it at their own risk and Fix This House cannot be held liable if they cause damage to their homes or injury. Fix This House cannot claim liability with all applicable laws, rules, codes and regulations for a project. Always stay informed of your local building codes! Happy and SAFE renovating!
#drywallrepair #drywallanchorholes #drywall

[@JesusPaidItAll]

Patchwork instructions begin at 6:50.

[@tmiles9747]

Some of mine fell through the whole.

[@Orgena_Deconstructed]

Amen!

[@JesusPaidItAll]

@@Orgena_Deconstructed 👍

[@tigereye8593]

Thank you 🙏🏽

[@Mariepurpose]

Thank you! You are the best!

[@SnowLily123]

I’ve noticed how a lot of the comments here are saying the info and tips for how to remove the screws and nails from the drywall during the first half of the video is “not needed” or a “waste of time”. So, as someone who actually did need that information as well as the information on how to fill the holes, I do not agree with those who think the first half of the video is unnecessary/a waste of time. However, I can see where some of them are coming from. I recommend that you edit the title of the video to mention that this video includes both the removal of screws and nails in drywall as well as the repairing of the holes. It will help alleviate the backlash and prevent confusion of those who are just looking for the information in the second half of the video. I hope you take my advice and continue to grow this channel of yours. Good luck! 👍

[@angelamichelleperez]

Half the video was talking about how to remove anchors if you want to get to the point of patching the hole then fast forward to 7:00 minutes in

[@mmmsunshine5367]

Thank you!

[@rachealsilburn901]

Totally agree. And thank you!

[@kamotefries6773]

Thank you 👍

[@ladegemini6766]

Thank you

[@landonharrison8353]

Gratitude

[@johndoe3485]

3:35 and 3:45 Bro, i was looking for that specific type of anchor that is flush and flat ring , because its hard to figure out how to remove. And NOBODY on youtube showed how to remove that type of anchor. But your the ONLY one who showed how to do it. Thanks bro. Your the man. 👍

[@MarkJaquith]

For those plastic anchors that are stuck, I just use flush cut wire cutters to cut the collar off, and then push them into the wall and let them fall into the void. It does way less damage to the wall because you're not dragging those flared parts back through the hole.

[@madamlt5758]

I should have read this before I destroyed half the walls 😫

[@crazyjloop89]

Fall into the void lol

[@breannnolannn]

I need this video!!!

[@dreamrare5946]

My husband is always busy working two jobs to support us but the time he gets home he’s tired… thank you for helping me step up as a wife and learn some home economics 💪🏽 I’m grateful for your service🙏🏽

[@farawayskies]

Thank you for stepping up

[@Christina-CA-808]

Thank you so much for the detailed explination on this! I've been planning on installing shelves and was so worried about how to repair the holes since I'm in a rental apartment. Thanks again!

[@jennifercolbert6581]

This thing is fantastic. kzbin.infoUgkx1McjgiqTNcTjrhvRvJWcrk5bzTeQW-Wn Easy to store in a bag in "screwdriver" position, not heavy but well built, and the location of the button makes it easy to screw or unscrew with one hand in either "gun" or "screwdriver" position. My only real complaint is there isn't a clip anywhere to store another bit, and the bit isn't a combo dual-ended bit either, so the flathead and P1/P0 philips bits we have to carry around invariably get misplaced.Note: Apparently Black + Decker changed this same Li2000 model from "Type 2" to "Type 3". This new "Type 3" appears to be slightly lighter, and the charging plug is now larger, with a little metal piece to keep it snug. I never noticed the "Type 2" version charger plug to not be perfectly snug, so not sure why this change was made - it does make it annoying that our shop now has 8 of these, and the new 3 have different charging plugs :/

[@lcgrind]

This is great - came here to learn about patching a nail holes but ended up leaving with a lot more knowledge than I expected. Subscribed.

[@FixThisHouse]

Thank you 🙏🏽 so much! 👍🏽😊

[@daniplantworld9890]

Thank you for this video. I was trying to fix my wall for weeks and I was scared of removing the anchors and creating a big hole. Thanks good ir worked perfectly and it was so easy! Thank you!

[@eliyhuz6579]

I hope I can do this successfully I want my security deposit back lol

[@FixThisHouse]

😂🙏🏽

[@TheBmonster1]

Mr. Yhuz this is your landlord. How big of holes did you make in the walls?? Do we have to stop by? We were just saying great things about you and you go do this. Your not getting it back.

[@Ms777lalaland]

Indeed

[@themagicshortbus]

Don't we all

[@chantsfax]

Getting your security deposit back is a fairy tale

[@ronmariataylor4865]

So clear and easy!!! Just what I needed it. Followed the patching with the screen and worked great. Thank you. This is a great channel. I just subscribed and plan to follow future videos.

[@patriciasutton8655]

Thank you! The tips for removing anchor bolts was just what I needed. Feeling much more confident now.

[@eileenwhite5792]

Wow! So well explained and easy to follow. Thank you so much!

[@joser5494]

Loved this! Really helpful. Thank you for posting this.

[@FixThisHouse]

Thank you 🙏🏽

[@WooMFBang]

I just learned so much, thank you!! I can do this!! I’ve always either had someone to do these types of repairs and now that I don’t, I’m trying to learn how to do some small things.l and get into diy stuff. These are the foundation skills I need. Thanks again!

[@FixThisHouse]

I’m glad I could be of help! Another great product you can use is 5 minute Hot Mud! Dries in 5 minutes! Here is the link to the product: amzn.to/3v2mOFm

[@RxTerps]

Dawg there are some things you won’t be able to do lol 😂

[@agalarzautube]

This is exactly what i was looking forward. Thank you.

[@Hydrophish]

Great tutorial, thanks!

[@billelliott3071]

Thank you for the video. It would have been very helpful if you went back and showed what the second coat would look like after the 'bubbled' holes had dried as well as the second and third layer over the mesh tape and how you finished the while process.

[@jazminepadilla7856]

Great videos and really helpful. Thank you!!

[@FixThisHouse]

I’m glad I could be of help! Thank you 🙏🏽👍🏽😊

[@cyoohoos]

Going to try this this weekend. Thanks

[@angelafaison5836]

Thanks! Just what I needed.

[@ngardner05]

Thank you for showing how to use drywall tape. I’ve got some holes about that size, and I bought that netted tape and didn’t know how to use it. Gonna go patch some holes!

[@sunnyshy1]

Great advice..thanks for sharing

[@Tgail1]

Super helpful! Thanks for the video 😊

[@FixThisHouse]

Thank you so much for watching!

[@ivonne2587]

Thank you for this very informative video! It was exactly what I needed and now know how to properly patch holes. Thank you thank you thank you!

[@FixThisHouse]

I’m glad I could be of help! 🙏🏽😊

[@jessiceeoriginal]

Thank you, thank you! This video was very helpful. I am so not a handyman type person. This video has been so helpful. Again thank you. 👍😁

[@FixThisHouse]

I’m glad I could help! 🙏🏽😊

[@bearandrabbit6826]

Spreading that spackle or compound so far out from the repair, is gonna add extra work to your repair. You can use a damp cloth to clean it up and save yourself extra work such as additional sanding and re-texturing... JS...Also pre-cutting your tape closer to the size of the hole repair, is a much easier option.

[@TheHumbleCarpenter]

Great video! Thank you for posting!

[@FixThisHouse]

Thank you for watching!! 🙏🏽👍🏽😊

[@Tonafromcorona]

Very helpful thank you 🙏🏼

[@RyanSylwester]

Thank you for wonderful instructions. I patched an area where a shelf was removed. Lot of embedded drywall screws. The wall looks almost flawless.

[@LotrCollection]

How did you match the paint?

[@jonathansmith4947]

The real question

[@MultiStats]

Thank you! You helped me out with a problem and provided an education to an ignorant person. I am a new subscriber.

[@drakezen]

Great tutorial! Subscribed!

[@FixThisHouse]

Thank you so much!

[@dianedodd8944]

Good informative video, we have a lot of anchors in the wALL, i WILL LOVE GETTING THEM OUT.

[@FixThisHouse]

Thank you 🙏🏽! Best of luck with your repair! Let me know if you need some advice! Be sure to check out my patreon as well on the description of the video 🙏🏽😊

[@ShainaDeCiryanPhotographer]

Thanks, this was very helpful!

[@ssh348]

Thanks for talking about caulking. i was wondering also if that would be an option, and a (supposedly) handyman said i can even use caulk to fix no-longer adhesive taping work on my ceilings edges. I figured i will watch lots of youtube videos before doing the work, and here we go, i got my answer. NOT doing that caulking because would like a nice and smooth paint job after.

[@sociopathmercenary]

I always use the handle of my drywall knife to dent in the hole so that you can get better adhesion of the drywall compound and a better chance of having an even unnoticeable patch

[@ElGranCaminante001]

Super helpful brother. Thanks! Ur awsome

[@FixThisHouse]

I’m glad to be of help! Thank you for watching 🙏🏽😊

[@ncironhorse8367]

Good video. I use a countersink on a drill to clean the edges of the hole instead of a scraper. I think it also helps to push the joint compound into the hole

[@aaronfernandez9626]

Thank you for the video. Very very helpful 👏 👌 👍 🙂

[@annak3573]

New subscriber, I needed this. Thank you for the great video. I love that you are at 143K subscribers at the time of this video! Thanks again for the great info

[@FixThisHouse]

Thank you so much for the love and support! May I continue to help you on your future home fixes 🙏🏽😊

[@lisalee-lee235]

Nice helpful tips~thank you! 👍

[@FixThisHouse]

Thank you 🙏🏽

[@12gt13]

Awesome video! Thanks a lot!

[@FixThisHouse]

Thank you for watching! 😊🙏🏽

[@ferrocone]

Seeing this video in 2023, and at the beginning your thanking everyone for making it to 2,000 subscribers. Wow! Keep up the great work man!

[@francewallend8751]

Thank you so much! Very helpful video!

[@FixThisHouse]

anytime! I’m glad I could be of help! 🙏🏽😊

[@mlewis8579]

oh my goodness! all ready you have helped me! now to watch the repair! subscribed!!!!

[@FixThisHouse]

I’m glad I could help! Thank you for watching! 🙏🏽

[@LearningWithMaryam]

Wow. Amazing video thanks so so much. Your the best 👌

[@YellowTulippe]

Thank you! Just what I needed!

[@venamarievillanueva965]

Thanks for the tips!

[@emmarhymes8152]

Thank you so much for this video. Quick question though, don’t know if I missed it. If you have a deep inch or so hole, would you pack it a little with something before putting the bridge tape over the top? Or just still only put the tape and fill?

[@Ibuse123]

Very well done

[@FixThisHouse]

Thank you 🙏🏽

[@kimshipmon7076]

Thank you for this video!!! I learned a lot!!! Thanks again

[@FixThisHouse]

I’m glad I could be of help Kim! Thank you for the love and support! 😊🙏🏽

[@LeonLion95]

The exact video I needed for what I need to repair! Thanks!

[@FixThisHouse]

Thank you! Also 5 minute hot mudd will do the trick as well!

[@sillydreamz89]

New subscriber here! Will be trying this when mom and I tackle a project this weekend. Thank you

[@FixThisHouse]

Thank you so much for the love and support! I wish you the best! 👍🏽😊

[@loribengeify]

Just fixed a 1 in hole worked great. Thanks

[@FixThisHouse]

You are very welcome Lori! Great job! 🙏🏽😊

[@nataliey07]

Thank you for this video !

[@FixThisHouse]

Anytime! Glad I could be of help!

[@dawnsky11]

Very helpful! Thanks!!

[@FixThisHouse]

Thank you 🙏🏽!

[@Joyful_One_]

Great content! Thanks for the info!

[@FixThisHouse]

Thank you for the feedback 🙏🏽😊👍🏽!

[@andrewjordan5662]

After removing the nail/ screw/ anchor....take rounded end of ball pein hammer and slightly dent the drywall surface over the hole...then apply the drywall compound..that way you wont tear the drywall paper surface by scraping and the hole will be invisible after painting...

[@tammymartin6800]

excellent video for a beginner looking to fix my walls!! Thank you

[@FixThisHouse]

Glad I could be of help!

[@evelynamaro7738]

thank you very helpful.

[@cbaide100]

Really useful knowledge. Thank you.

[@FixThisHouse]

Thank you for the feedback! 🙏🏽😊

[@zahrangoodboii5199]

thx! very helpful

[@nastyneight3171]

you are beyond appreciated!!!

[@FixThisHouse]

Thank you so much! 🙏🏽😊

[@RosieN]

Excuse me?! When this was uploaded you were at 2k?? Incredible growth and evergreen info!!

[@ambertollefson4946]

Cool video thanks man

[@dominicsinableng349]

Thabks for the video! I appreciate u!

[@kalier6260]

Thank you a lot bro, it help me! 🙌🏻

[@germanbyrabia]

This video was very informative.

[@lindameadows9771]

Thank you very much.

[@joannemachold9906]

Thank you!

[@k3n12ock]

New home owner here and although theres alot I know, home repair isnt one of them, so thanks for the vid.

[@FixThisHouse]

Congrats! You’ve come to the right channel! Here I’ll show you simple DIY fixes on common home owner problems you can do yourself to save a lot of money 👍🏽😊

[@jonathansmith4947]

Great video

[@justfornana]

Thank you! Thank you! Thank you!

[@painting1012]

Appreiate the tips my friend

[@butifulsmrtsingl]

This wss very informative. Thank you.

[@butifulsmrtsingl]

Was *

[@shirleyford844]

Hello, this video really helped with covering screw holes in my wall. However, I have a bathroom towel holder where one end was knocked out of the hole, which is over an inch wide. Once I place the mesh tape and the joint compound over the hole, once it dries. I can then put the screw back in there? Or do I have to try and replace the whole towel rod? I sure hope it's No!! Thank you.

[@jgarno100]

Most holes are on painted wall surface. It gets tricky to not mess up the paint on the wall next to the holes.

[@rachealsilburn901]

Hence the reason you better be prepared to paint after patching.

[@viktor2915]

@@rachealsilburn901 cant you use a colored compact? Painting takes a whole day

[@rachealsilburn901]

@@viktor2915 I didn’t know you had to paint a whole wall after patching a hole.

[@Insomniacsloth]

Very well-made video.

[@FixThisHouse]

Thank you! 🙏🏽😊

[@GabrielleRousseau]

Can I use the same techniques on painted walls?

[@ryantrimble881]

Thanks for the video

[@FixThisHouse]

Thank you for watching! 🙏🏽😊

[@Uncas0706]

Thanks for these tips! Very clear and helpful!

[@FixThisHouse]

Glad I could be of help! Thank you 🙏🏽

[@EeveeLO6]

Thanks

[@SallyFeedsKids]

When you have an anchor situation you can also recess it by lightly tamping it back into the drywall and then fill it with compound.

[@perrydadrass389]

Hi jay, I would like to know the best way to fix and repair the cracks in the ceiling. Thank you very much . Please keep up the good job! Perry from Long Beach California.

[@kingshearer2]

Great video thanks, that mesh tape looks great. Does the sanding not damage the mesh?

[@lindamaturesass]

Great info and easy to follow. Thanks so much ! New subscriber. 🙂

[@FixThisHouse]

Thank you so much for the love and a support! 🙏🏽😊

[@marthawong7655]

Thanks for the detail DIY filling a wide variety of application. This is a GREAT wealth of information and thanks for the tips. This will be my GO TO Channel. Thank you so much!!

[@FixThisHouse]

Thank you so much for the feedback and the love and support! 🙏🏽😊👍🏽

[@dthanna]

well done

[@FixThisHouse]

Thank you 🙏🏽

[@applefel3351]

Thankbyoucsi much for this, it helps us

[@FixThisHouse]

Thank you so much for watching 🙏🏽😊

[@c2h2o9c9olate]

The small finishing nails can also be driven in below the surface using a nailset leaving a clean edged hole that is simple to repair using drywall compound or spackling compound.

[@FixThisHouse]

Thank you 🙏🏽! 😊

[@kenvasquez3604]

Hi there. What if i have a half inch to one inch hole that needs to be repaired but also needs to be reused. would a layer or two of of joint compound with mesh be good enough to hold the screw/anchor? ( im trying to reuse the hole from the bathtowel rack )

[@FixThisHouse]

Joint compound usually bonds fairly well to the gypsum inside drywall panels. However, you must get it thoroughly filled to make good contact. Also, standard joint compound shrinks substantially, so you'd be better off with a setting-type product (Easy Sand 45, for example If you're hanging something very heavy and you want to make sure it's a strong patch, and if you don't mind a hole at least an inch or two and a little patching & filler & paint you could put a piece of wood behind it and screw it into the "good" drywall on either side: Please check out my ceiling drywall repair video, it’s a similar process 👍🏽😊🙏🏽 best of luck!

[@human1513]

Toothepaste, not the gel stuff also works great to fill small holes in place of drywall putty. I have seen spray expandable foam used to fill say a 1" diameter hole. Once it hardends trim it down flat with a knife. Then putty over it.

[@georgeandraos820]

thank you !

[@FixThisHouse]

You are very welcome 🙏🏽😊

[@FarmIand]

Thank so much

[@FixThisHouse]

It was pleasure! Thank you for watching! 🙏🏽😊

[@tmiller584]

Great video.

[@FixThisHouse]

Thank you so much!

[@abolit]

for the fist layer over mesh patch the regular compound is not the best option. Quick Set 20 - 45 is better fit .

[@eleyjadore3143]

After the first layer of the quick set has dried. The following layers should be with the joint compound?

[@teawatkins1735]

Thank you for the helpful video. Are we able to put in another screw after repairing the hole? Or how do we do that?

[@FixThisHouse]

Thank you! Yes you can! Just make sure to let it dry fully!

[@jamieking1331]

thank you so much!!!!

[@GhostBoca]

Thanks sir. Pedro from margate Florida

[@FixThisHouse]

Thank you so much for watching! 🙏🏽😊