FL Studio 12: How To Assign Your Midi Drum Pad To FPC |

[@joejoemojo]

it literally took me months to figure out how to do this. kept finding shitty tutorials that told bad instructions. thanks!

[@ThatOneGirlDrummer]

Yo this is legit the best, simple, and quick tutorial for how to do this. Exactly what I needed, not some bullshit 30 minute video. I thank you for this brotha!

[@thejacktrippashow5635]

You just rescued alot of midi pads homie

[@couchman-sw6jy]

Just got mine, I’m learning so quickly :)

[@stancebeats5265]

Mine included. Wife just got me an AKAI MPD218 for my birthday 🥲🥰 gotta break it innnnnnnnn

[@t62720]

@@stancebeats5265 shes a keeper lmao

[@EMG_JA]

2022 and I’m just now tumbling over this vid

[@clangon]

1 minute into the video and you are already the most helpfull person, I used to find you a bit annoying but I have been watching your videos alot recently and they are very good so you have now got a subscription

[@Theanondon]

Clangon he doesn’t need you nigga

[@jarvissdot7700]

@@Theanondon lol

[@iTheRealBigbosceoProductions]

FINALLY!! A channel that actually breaks it down without a 1000 hour video. Big ups! -The Mixgician (Bigboscoe Productions)

[@8Phoenix8]

This is the ONLY video that does it right. Everyone else does not talk at all about what to do if you have a pad that is less than 16. 👍🏾 😊I appreciate it

[@Anonymous-kj8zc]

Bro ive literally been lookin for dis typa vid for 5 days straight on end and ive literally been sittin through videos that are 20-45 minutes long, tryna find how to do dis shii, and i clicked on dis video and im glad i did cuz dis is exactly what i needed, honestly God bless you bro!! You a real one

[@MrGodfatherGaming]

Thank you! The tutorial was even better due to fact that we have the same keyboard :D

[@mandit38]

Broooo thank you, 4 videos later your tutorial was the most simple and helpful of all some people are so dry and boring you almost fall asleep, but your video was under 7 minutes. I will admit the Mapping the knob controls was helpful, but combing the too calls for a long boring video, thanks again, Sherwood, Oregon.

[@1matttt1]

thank you so much for the no bullshitting and got straight to the point, was trying to figure this out for hours but every video was so unhelpful and lengthy. thanks man!

[@kenziebodden2784]

I just got a new Akai controller and I was just strolling around looking for a video to set it up and for some reason I tap on your video and it help, so thanks.

[@IsawAcowBro]

Jesus someone who actually answered the question thanks dude!

[@tydirty6884]

I need that BDK kit...them thangs was slappin!

[@CurtissKingTV]

Hey family, email me at [e-mail].. I got something for you -Rah'Lee (Team Curtiss King)

[@JiNKA]

Agreed, the kit was warm and struck quite vigorously. I too shall inquire of its origins.

[@raphy0o227]

@@CurtissKingTV Why you deleted it ?? I still need the kit 10 years later !!

[@taylorsteinfeld8346]

Awesome! This was a question I've been having. Thanks Curtis! Good job on your first tutorial

[@infonic565]

Thanks bro, I have the same alexis model, I did not know how to arrange the fpc. One love

[@brendonladines4822]

Bro I appreciate this video so much I've been growing as an artist/ musician and I'm excited to use this method to continue my beat making skills.

[@PasiviN]

Bro honestly I bought fl producer and maudio oxygen 49 2 years ago. And never could get them to work... but I been trying to learn from scratch how to make full songs. Took me 6 months to learn how to record vocals because I wasn't choosing source in mixer lmao. This is gold and has saved me. 100% subbed and liked. ( btw when I couldn't record I was recording in ableton then transferring to FL LOL)

[@terrykelsey2472]

YOO!! Thank you so much for showing how to map all the pads!!!!!!

[@itsalovething8190]

0:29 "It's actually really sample"

[@FarEastTekHD]

He did do a lot of sampling bro XD

[@Denqee7]

turn up the valium bro

[@sonicriders.7]

He did like 3 things

[@therealuno808]

after plugging in all my drums into the fpc, is there a way that i can convert the notes in the fpc’s piano roll into the original piano roll?

[@djmurcielagobeat]

Did you figure it out????

[@therealuno808]

@@djmurcielagobeat sadly not

[@KazuhiroHayate]

Yooooooo! this Helped me soooo much! I'm Using my Buddies Akai MPD218 and I was trying to use MPC BEATS plugin. and That was just tooooo much for me. I knew there was a way to use something else in FL and this is PeeeeeRrrrrrrFeeeeeeecto! Thank You so much cause I was getting Annoyed. Also Shout out to that 14 year old.

[@radrambo8587]

I honestly can’t thank you enough this was my last hope and getting this to work ❤

[@nickmgic7478]

Thank you holy crap Ive watched like 50 tutorials so far on this and this one helped thanks

[@carlosbaker7825]

thank you I've been trying to learn this since 2008

[@ChristopherHarrisonZimwarrior]

Excellent thank you so much I've been trawling for hours trying to find this info.

[@CjLive]

Thanks! you saved me time here you go thank you

[@CurtissKingTV]

Thank you fam 🙏🏽🙏🏽

[@mikedumer1686]

Thank you! Got the MPD218 finally working!

[@cliffordlebern6937]

I appreciate a short and to the point video that works. Thumbs up!

[@billybobll968]

Preciate you my guy just decided to hop on the midi game for more grooves and picked up the novation launch key

[@Descalibrado_]

Holly molly the tutorial i needed, so long searching for this, thank youuuuu

[@doppelganger7934]

I actually just brought an alesis v25 so this really helps.

[@agthaog1986]

Doppel Gänger yeah i brought his lil b4 the new year .i had difficulty figuring out how 2 set them up so I asked him. Thank god 4 this

[@DEEJAYVAX]

Hi, thank you for explaining this simple trick, about to learn the PADS only once with the fonction Maps entire bank, you really save my day :-)

[@infinite8885]

How do you take one off of the pad cuz it won’t let me take one I wanna switch another one with off

[@КартавыйЛовелас]

Dude, did you figure out how to do this? Because I have no idea

[@TorontoPopulistConservative]

Using FPC can you have different drum samples on different mixer tracks? How would I add effects to one drum but not another? How do you sidechain kicks for example when they are coming from FPC? Figured it out. FPC allows samples to go to unique mixer tracks

[@kreepteamofficial]

How does that happen

[@TorontoPopulistConservative]

@@kreepteamofficial I use mostly ableton these days, but I remember when you click on a pad in FPC you should see a number counter, that is where you select a mixer track for that pad

[@donturco7214]

Broooo, I have the same midi as you and my pads have never worked. I think it's a setting problem, I push one pad and the light remains on. I've been looking for someone to help me but I couldn't any infomation. There are no blogs on it nor people who can support me. Can u help me man? Thank u advance.

[@dubzy21]

How would you split by channel after doing this? Wouldn’t everything be on one “FPC” channel?

[@hennessy4806]

Was thinking the same thing did u find out anything?

[@gaukla42]

much love for fixing my problems!

[@uniquehoodrat]

Very good tutorial this will help me and my dad makes some beats

[@ritchvibesbeatsvideos9734]

Thanks Curtis, couldn’t figure it out or find much info on it 🙌🏻🙌🏻🙌🏻

[@focus414]

This helped me with my akai MPD 218. Thanks a lot!!!!

[@MichaelGrady]

Nice thank you! Wait, why do multiple sounds get triggered on one button?!

[@AngloCelticMan]

Lifesaver lad! Thanks a million!

[@echahbinabil1980]

woow .thank you .good work bro . we need more informations .thank you

[@bangbang.ninergang]

Thanks for this tutorial. ✊🏽

[@Toosore]

You make everything look easy bro!!!!!

[@ReaperOnRepo]

Thank you my good dude. It was easy to follow along and now I can try out these pads, but not before I subscribe real quick lol. Thanks again man fr!

[@Guidus125]

youre a lifesaver! worthy of my subscription, thanks a lot

[@JakkQuill]

Good and quick refresher course. Needed this! Bless

[@MarvellousBeatz]

This is perfect I just purchased a midi 🙏

[@ElevataMuzzik]

You the man for this. Thank you so much

[@jaspervb8425]

How don't you have the problem with the Alesis v25 where it double triggers sometimes on the pads? (you can look it up it's pretty common)

[@sodayumsouthern]

That happened to me when I first got mine. I guess it's just the way you hit the pads. I had to play around with it for a while to get past that.

[@zedmouse]

What I need to know is when the pads on my midi controller don't link up properly with the ones in FPC, how I can reassign a pad on my midi controller to whatever pad in FPC I want? I know there's a way to do it because I've done it in the past but it's been so long and I can't remember nor can I find anyone online explaining how to do it.

[@wojciechwojtowicz1872]

omg... finally ! thank you bro!!!

[@MASSKA]

Thank you very much!!! 2 hours I search it on all of GOOGL but I don't find and your video give me the answer for my probleme thank you very much!

[@astrocrowbeats]

Game gonna get you for stepping on his tutorial market

[@CurtissKingTV]

Big Poe 😂 go ask him who suggested I do these to begin with, then get back to me

[@taylorsteinfeld8346]

😂😂

[@jeffreyzie]

Thanks for the tips man. For some reason, every time I hit a pad, it mixes with other pads. Any suggestions?

[@kreepteamofficial]

Cut by :

[@kreepteamofficial]

Put them all at one and they'll stop when u press another pas

[@jeffreyzie]

@@kreepteamofficial like put all the sounds I’m looking to map into one pad?

[@papirico2227]

Hey brotha thank you for this video helpful . My question is how do I do all this on the ATOM PRE SONUS FOR fL sTUDIO 20.9.2 PLZ THANK YOU

[@user-zd3ns6wx7y]

I have an MPK mini. Your instructions worked for me to assign the 8 pads I have, but when I put a ride cymbal on it, the ride cymbal doesn't ring. It just makes a sound like a cymbal catch. How do I make it ride when I hit it? It only rides out if I keep my finger on the pad.

[@jMerisc1]

oh my gosh really thank u, istant subscribed

[@mandit38]

Any chance you have any tutorials on Mixing? that's short and sweet for beginners? thanks

[@mixmastervee9990]

You just earned a follower 👏

[@AgusJanardana]

thanks man! this was i looking for. Feel bad after downloading many vst but fl has the good one too xD

[@Nukswager1]

You should make a video of your home studio , what computer you use , what speakers etc.

[@Nostictv]

Damn... I never knew how to do it this way. I use to do it manually from my midi controller lol xD

[@ricardobalthazar5958]

i had too subscribe thanks very much bro

[@xbamsxunholyxunionx]

Quick question. Just set up fruity loops and plugged in a midi keyboard. It plays different instruments when i strike a key on the keyboard. How do i change is so that when i strike a key it plays only that instrument ?

[@prateek6614]

Great one . Thanks

[@PRODBYASIRO]

I hit the pads at the right time but when I lay the notes down in the piano roll it sounds like garbage and the quick quantize is ass how can I make this work. I love my mpd 218 but I can’t use it because it sounds trash. Please help me I can’t find a video to help me.

[@charms-iam246]

Finally found a tutorial that i understand and easy lol thank you!

[@MountCassidy]

sometimes i back here for this simple tips Bless bruh

[@schweigenmachtkrank5273]

Niiiice. But how is IT with Note repeater? Is IT possible?

[@attchrisgomez]

Hey Great Video! But if i want to do this with the individual sounds of the channel rack can i link the pads like that without fpc?

[@daaamn001]

What’s up Curtiss:) thx for that informative video:) thumps up:)

[@vincemincevince]

great tutorial really helpful

[@iamaprimate]

Sounds like Ice T from Rick and Morty. Great Video!!

[@sosa4472]

Needed this fam

[@mistaklc877]

Very Helpful. Thank you. Peace and blessings.

[@zdochnikkt838]

Thank you very much Bro you helped me

[@angelstraker6720]

best tutorial ever

[@lowbs]

How do I speed up the reaction time of the pads? When I tap on them the sound kind of has a tiny late reaction. I want the output of sound to be instantaneous to when I tap the pads.

[@polyphomikk5623]

It might be some latency issues. Make sure to use your primary audio interface's latest drivers or Asio4all driver. Go to audio settings and route everything as you need.

[@wm1573]

If you use audio interface you gotta choose it as the audio driver. I used my digital piano in FL studio for few months with tiny delay, because I didn't realize I had to chance that setting.

[@lowbs]

@@wm1573 my comment was a year ago haha Ive figured it out, but appreciate anyways my guy

[@MugenKaizenBeats]

More tutorials please 👍

[@jeancmp]

I already set the midi pads with sounds but when I tap any pad I can't hear any sound. What Im doing wrong?

[@Kcoolin]

I have an mpk mini 3, that i just purchased today and this doesn't work. Idk why, I've set it up to my knowledge right. when I go to bind the drum pad with the samples, it selects all of the samples in FPC and binds it to one pad.

[@mashrurhossen2586]

thank you so much man ❤️

[@Mobiii25]

NEED HELP PLS!!! i did everything you said and clicked map notes for entire bank, but it still when i click pad 1 it will play like 4 different pads???

[@deanophago]

Thank You Curtis

[@pyramidpilots6491]

I just stumbled upon this video and we got the same midi controller

[@PRODBYASIRO]

Love from Sweden curtis!

[@elaborateillusion]

praise the lord thanks so much man

[@TheNinja94a]

When I drag the kick to the pad, it doesn't let me, and the kick just goes back, while the pad remains empty. How do I solve this?

[@syd3122]

hey there, i'm using electronic drum yamaha dtx 400 and started using fpc just now, i wonder how can i assign my extra splash cymbal to the pads, cuz all of my pads are all working except the extra cymbal which is note A4 for the midi input and the FPC pad doesn't have the A4 Note How can i add/assign that A4 note to the fpc?

[@ignasisxd9531]

when i press drum pads my piano is playing too. can u help?

[@georged2251]

Thank for the tut but when I since I have only 8 pads, when I go to play when Im done mapping, It thinks im still mapping

[@BonEchoGearReviews]

Hello. Great video, and thanks. Does anyone know how I can get my Yamaha DTXpress 3 kit working in FlStudio 20 PC. I've tried many things but still no success...I don't think I have the right driver.

[@MarcsCanal]

Fire Bro thanks🔥🔥🔥 If I tweak some settings on my kick in the channel rack, for example shifting it or pitching it down it won’t affect the sample on FPC I would like to have the kick in the channel rack and the one I loaded into FPC to be linked is that possible? Because the settings in FPC aren’t as sophisticated as the sample settings? Or can I put FX on my sample in FPC?

[@jordanalex6880]

We have the same keyboard! :D great video

[@jameymacqueenjameymacqueen7087]

Can I hookup fl studio mobile to my alesis nitro mesh drum kit, with a midi cable?

[@jarvissdot7700]

can you do a how to sampling video and how to record live from what your playing

[@KindaCool843]

I have the Donner Spacline DMK 25 and mapping notes for entire bank did not assign anything. I have one pad that engages like 6. Please help!

[@musicislife704]

Thank you bro i watch millions videos finally someone showed me🤦🏾‍♂️