Flare line inspection // external corrosion // pitting measurement // UT thickness measurement
Пікірлер: 34
@SVSeeker3 жыл бұрын
Howdy Eric Nice video. Is there much pressure on a flare line?
@MrEric_API3 жыл бұрын
Doug, thanks. No there usually isn't a lot of pressure. The only time the flare line will see pressure is during its emergency use. Then the pipe will see pressure depending on a whole bunch of variables, like pressure, size of pipe of the flare, the flare line, and the piping feeding into the flare system. Most systems change to a larger pipe to allow a pressure drop at the connection. I'll release a video I have of when a flare system has a bunch of gas volume at high pressure dumped. I'll have to adjust the volume though, otherwise it would not be safe for hearing...... kzbin.info/www/bejne/o2jUfpd4eJVlqLM
@doxielain2231 Жыл бұрын
It's nice to be included. This is like csb fieldwork, I like it
@MrEric_API Жыл бұрын
Glad you like it!
@imchris50003 жыл бұрын
neat video keep making them the first 1000 subs is the hardest you have very interesting content
@MrEric_API3 жыл бұрын
1000? Heh, how about the first 100?
@imchris50003 жыл бұрын
@@MrEric_API you just gotta keep pumping out videos and the algorithm will start picking you up
@azizalwi25492 жыл бұрын
Hi. Very interesting video. Keep uploading inspection videos since it will be useful for someone new me. May I know what is your recommendation to client with the amount of corrosion you have found with the pipe? Sectional replace? Or the pipe is still fit for service?
@saranyadevi64682 жыл бұрын
Very wonderful message sir
@MrEric_API2 жыл бұрын
Thank you.
@zigmogcreator2 жыл бұрын
Like that scraper.
@MrEric_API2 жыл бұрын
Thanks, glad you like a mean scraper. MrEric.
@ashkumar87976 ай бұрын
Thanks for sharing this.
@MrEric_API6 ай бұрын
My pleasure! Tell your friends, family, and coworkers. MrEric
@devonsanger15697 ай бұрын
Would you make a recommendation with regards to that SS U-Bolt on CS Piping?
@MrEric_API7 ай бұрын
If I recall correctly the U bolts were zinc coated. MrEric
@niteshhebsur45296 ай бұрын
Are these pipe run showed in video are supported with tight U bolt/0 gap U bolt, and are these flare lines have high temperatures
@MrEric_API5 ай бұрын
Great question. No, they are supported by the steel structural supports and the U bolts are holding them solid to those supports. The flare piping doesn't get hot per say, as it is supplying gas to the flare, which is burned at the end of or top of the flare. Mr.Eric
@okaguacharles29433 жыл бұрын
Hello Eric, nice video but I would like to know your recommendation on this inspection
@MrEric_API2 жыл бұрын
Which one?
@sahatnawaz90165 ай бұрын
I am doing the ultrasonic thickness of pipe but can you tell me how can i reject the pipe on the basis of thickness or it will be not my headache?
@MrEric_API5 ай бұрын
As a UT/t technician you will provide these numbers to an API inspector to perform tmin &remaining life calculations. MrEric
@saranyadevi64682 жыл бұрын
Please same more vedio uptade sir
@MrEric_API2 жыл бұрын
Mr Devi, what do you what to see? More video? Or another video of external pipe corrosion?
@joseroman40392 жыл бұрын
Replace the pipe that section of pipe and reacoat.
@MrEric_API2 жыл бұрын
No need to replace, and it never had a coating.
@saranyadevi64682 жыл бұрын
How to identify internal corrosion explain sir please
@MrEric_API2 жыл бұрын
Watch upcoming videos for a more in-depth conversation re: this subject. Tell your friends and coworkers to be on the look out also.
@eliotartigue67052 жыл бұрын
Internal corrosion can be found by UT thickness OR profile radiography
@arashebadtabrizi13013 жыл бұрын
What is this job called I am interested in inspection
@MrEric_API3 жыл бұрын
Good question. Here is the United States, it is an API inspector. It is the governing organization in many countries in the world. It is the origin of all things oil. The is not the case in all countries however. It varies depending upon which country the activity is in. Many other countries have their own or otherwise different organizations that certify or regulate inspectors and their inspections.
@arashebadtabrizi13013 жыл бұрын
@@MrEric_API I’m living in the United States is this job only in the oil industry ?
@MrEric_API3 жыл бұрын
@@arashebadtabrizi1301 well......mostly. It's oil .....and gas. .......and sometimes chemicals....and mining....and agriculture...and...and......and..... There isn't really a limit. I'll inspect anything, just about anywhere. they pay me money to inspect and render either an opinion or a report. That's what I do.